Tecnosystemi smart clima FREEDOM 380 User manual

FLOOR STAND
MODELS FREEDOM 380 - FREEDOM 480 - FREEDOM 550
COD. 11100017H - 11100018H - 11100019H
USER MANUAL
REV.02/2017

Use the screws supplied to fit the legs (A) that support the outdoor unit (B) using the slots in the
legs as can be seen in (fig.1), then position and place the two cross-bars on which the outdoor
unit sits (C).
Proceed then by fitting one of the 4 plates (D) underneath each supporting leg (A) using the nuts
and bolts supplied.
ASSEMBLY AND INSTALLATION
This new type of floor stand, available in three different models, allows the unit to be installed
outdoors in such a way that it remains off the ground.
This will protect the outdoor unit from any adverse weather conditions such as heavy snow or
flooding.
Floor stands are made in electrogalvanized sheet metal and are painted with hardwearing and
weatherproof polyester powder.
A
B
C
D

The Warranty is valid for a period of 12 months from the date of delivery.
The manufacturer guarantees the quality of the materials used and the workmanship.
The Warranty covers material and manufacturing defects and provides for the supply of parts to
replace any defective components, without any right to claims for compensation, loss or requests
for damages.
The Warranty does not cover the replacement of components that are damaged because of:
• Transportation;
• Installation that does not comply with the instructions given in this installation, use and
maintenance manual;
• Failure to follow the specic instructions;
• Insufcient maintenance and any other damage caused that cannot be attributed to original
material or manufacturing defects.
The stand must be disposed of in conformity with the applicable laws on separate
waste collection and recycling
CODE L mm P mm H mm a mm b mm WEIGHT CAPACITY
KG
11100017H 800 380 800 415 / 600 175 / 350 200
11100018H 800 480 800 415 / 600 175 / 350 200
11100019H 800 550 800 415 / 600 175 / 350 250
WARRANTY
DIMENSIONS
DISPOSAL
H