Teknion YMSTA Operating and maintenance instructions

MAST Arm on Stanchion Mount (YMSTA) Part and Product Identification
A1 - Straight
(N09-5900)
Section:
Description: Page No:
Date:
Rev. No: 2
MAST ARM - STANCHION MOUNT
ERGONOMICS AND ACCESSORIES
Sept 2017 1 of 4
COM_209d
complements Installation Guides
A - Manaul Arm
B - Dynamic Arm
A2 - Straight
(N09-5900)
A3 - Straight
(N09-5900)
OR
OR
OR
B1 - Angled (N09-5874)
Light-Angled (N09-5880)
B2 - Straight (N09-5897)
Light-Straight (N09-5901)
B3 - Primary Connector
(D06-4187) x1
Stanchion
B3
B1

Section:
Description: Page No:
Date:
COMPATIBLE ARM CONFIGURATIONS
Sept 2017 2 of 4
COM_209d
MAST ARM - STANCHION MOUNT
ERGONOMICS & ACCESSORIES
complements Installation Guides
Above diagram shows configurations for the Stanchion Mount
MANUAL ARM - STRAIGHT
(N09-5900)
MANUAL ARM - COMPACT
(N09-5898)
MANUAL ARM - KNUCKLE
(N09-5899)
DYNAMIC ARM
Angled (N09-5874)
Light-Angled (N09-5880)
DYNAMIC ARM
Straight (N09-5897)
Light-Straight (N09-5901)

STEP 2: Slide the Primary Connector for the Dynamic arm into the Stanchion ChannelSTEP 1a: Slide the Manual Arm into the Stanchion channel
Section:
Description: Page No:
Date:
INSERTING MANUAL ARM INSERTING PRIMARY CONNECTOR
COM_209d
3 of 4
Sept 2017
MAST ARM - STANCHION MOUNT
ERGONOMICS & ACCESSORIES
complements Installation Guides
Stanchion Stanchion
A1 B3

STEP 2b: Tighten the hidden tension screw. Put on Dynamic Arm.STEP 2a: Rotate the Knurled Knob to secure the Manual Arm in the desired location.
Section:
Description: Page No:
Date:
INSERT MOUNT INTO STANCHION SECURE AND INSTALL ARM
COM_209d
4 of 4
Sept 2017
MAST ARM - STANCHION MOUNT
ERGONOMICS AND ACCESSORIES
complements Installation Guides
B1 or B2
B3
Stanchion
A1 or A2
Stanchion
Stanchion
B3
NOTE: Please refer to the Manual arm guide
for the detailed installation.
(Installation Guide No. COM_207a.)
Install Stanchion Cap.
Refer to Installation
Guide No.
COM_209b for
information
NOTE: Please refer to the Dynamic arm
guide for balancing and other arm
adjustments.
(Installation Guide No. COM_210b)
Underside View