Teknion HNBEBF Operating and maintenance instructions

Navigate Base Feed (HNBEBF), Base Feed Cover (HNBEBC), Chicago Base Feed (HNBEBFCH), Split Base Feed (HNBEBFS
Section:
Description: Page No:
Date:
Rev. No: 02
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
May 2022 1 of 10
HABN_321c
height-adjustable bench Installation Guides
F2
F1
C1
B1
B2
NOTE: Navigate Height Adjustable Base is
shown for reference.

Part and Product Identification
A1 - Base Feed w/ Bracket
(HNBEBF-END) x1
Section:
Description: Page No:
Date:
Rev. No: 02
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
May 2022 2 of 10
HABN_321c
height-adjustable bench Installation Guides
A2 - #8x 1
2 RND ROB Screw (FS8
x 1-2 -RRB) x4
B1 - Base Feed - Mid Condition
(HNBEBF-MID) x 1
B2 - Universal Base Feed Mounting
Plate (MPA16-E081) x1
B3 - Machine Screw Pan Head
Cross (FS1-4-20x5-8RPM) x2
B4 - #10-16 x 7
16 Pan Head Screw
(FS10-16x7-16QRB) x2
C1 - Base Feed w/ Bracket
(HNBEBFS-END) x1
C2 - #8x 1
2 RND ROB Screw (FS8
x 1-2 -RRB) x2
D1 - Chicago Base Feed w/
Bracket (HNBEBF-END) x1
D2 - #8x 1
2 RND ROB Screw (FS8
x 1-2 -RRB) x2
E1 - Chicago Base Feed - Mid
Condition (HNBEBFCH-MID) x1
E2 - Universal Base Feed
Mounting Plate (MPA16-E081) x1
E3 - Machine Screw Pan Head
Cross (FS1-4-20x5-8RPM) x4
E4 - #10-16 x 7
16 Pan Head Screw
(FS10-16x7-16QRB) x2
A - Base Feed - End Condition (HNBEBF_E) x1
OR
B - Base Feed - Mid Condition (HNBEBF_M) x1
OR
C - Split Base Feed W/ Bracket - (HNBEBFS_End) x1
OR
D - Chicago Base Feed - End Condition (HNBEBFCH_E) x1
OR
E - Chicago Base Feed (HNBEBFCH_M) x1
OR
F - Base Feed Cover - (HNBEBC) x1
F1 - Base Feed Cover Assembly -
(MPN09-E135) x 1
F2 - Cover - Base Feed Box
(MPA15-E779) x 1
F3 - Hardware Kit for Base Cover (X01-4284) x1
F3A -#8x 1 2 Tek Screw
(FS8 x 1-2 -RRB) x5
F3B - 1
4-20x 5 8 " Machine Screw,
Quad Truss (E01-0098) x 2
F3C- HN_1
4-20_ST_ZN_KEP*RR
(E03-0059) x 2
F3D - Cork Cushion Pad
(PFCORK-PS125) x 2

STEP 1b: Install Box Cover. Connect the Base Feed to the Power Harness (24").STEP 1a: Align the Split Base Feed Bracket with Pilot Holes and Fasten it as shown
Section:
Description: Page No:
Date:
INSTALL SPLIT BASE FEED INSTALL BOX COVER (OPTIONAL)
HABN_321c
3 of 10
May 2022
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
height-adjustable bench Installation Guides
NOTE: Cable Channel is hidden for
illustration purposes
NOTE: Connect the Base
Feed to Power Harness
C2
C1
F3A
F2

STEP 3: Install Base Feed onto the Power Harness as shown other end of the Power Harness
to the Power Module. Install Cable Tray to the Frame after installing ALL ELECTRICS on to
the Wire Channel
STEP 2 : Install base feed. If Required, 2x #8 Self Drilling Screws can be used
Section:
Description: Page No:
Date:
INSTALL BASE FEED ATTACH BASE FEED & INSTALL CABLE TRAY
HABN_321c
4 of 10
May 2022
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
height-adjustable bench Installation Guides
NOTE: Chicago Base Feed (HNBEBFCH)
is similar to Base Feed(HNBEBF)
NOTE: Power Harness should always be a
24" Linking Harness
NOTE: Flip Cable Tray over and install to
Frame Cable Tray to be installed AFTER
ALL Electrical components have been
installed
A1
A1
A2

STEP 5: Loosen screw to adjust the height of the cover bracket.STEP 4: Fasten Bracket to underside of Stretch bar using hardware kit for HAB Base Feed
(X01-4284). Attach Cork Cushion pad to base feed cover.
Section:
Description: Page No:
Date:
INSTALL BASE FEED COVER LOOSEN SCREW
HABN_321c
5 of 10
May 2022
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
height-adjustable bench Installation Guides
F3D
F3B
F3C

STEP 7: Tighten screw to secure base feed to table.STEP 6: Adjust cover to level onto finished floor.
Section:
Description: Page No:
Date:
ADJUST COVER TIGHTEN SCREW
HABN_321c
6 of 10
May 2022
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
height-adjustable bench Installation Guides
F1

Section:
Description: Page No:
Date:
INSERT CABLE INTO BASE FEED COVER
May 2022 7 of 10
HABN_321c
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
height-adjustable bench Installation Guides
STEP 8: Insert Base Feed cable into Base Feed Cover as shown on illustration above.

STEP 9: Remove screws to loosen mounting plate for base feed STEP 10: Reposition the mounting plate to parallel or vertical orientation
Section:
Description: Page No:
Date:
ORIENTATION OF BASE FEED
REMOVE SCREWS FROM PLATE
PARALLE AND VERTICAL ORIENTATION
HABN_321c
8 of 10
May 2022
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
height-adjustable bench Installation Guides
NOTE: Parallel Orientation
NOTE: Vertical Orientation
B2
B4
B4

Section:
Description: Page No:
Date:
INSTALL MID BASE FEED
May 2022 9 of 10
HABN_321c
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
height-adjustable bench Installation Guides
STEP 11: Fasten Middle Bracket and Base Feed. Install assembly to Stretcher bar as shown. Installation for Chicago Power Module is Similar.
NOTE:Wire Channel and other electrics are
Hidden for illustration purposes
B3
B2

Section:
Description: Page No:
Date:
NOTE
May 2022 10 of 10
HABN_321c
NAVIGATE BASE FEED INSTALLATION
ELECTRICS
height-adjustable bench Installation Guides
STEP 12: Installer is to determine the layout for the data, wire management brackets and m-clips in the hatched area
NOTE: M-Clips
NOTE: Wire Management