Tekvox TEK411RA User manual

TEK411RA
79045RA
Ultra-thin HDBaseT Receiver
131ft/40m 4K UHD, support audio de-embedding
All Rights Reserved
Version: 2017V1.0

Ultra-thin HDBaseT Receiver
1
Statement
Read this user manual carefully before using this product. Pictures shown in this manual is for reference
only, different model and specifications are subject to real product. This manual is only for operation
instruction only, not for any maintenance usage. The functions described in this version are updated till
February 13, 2017. In the constant effort to improve our product, we reserve the right to make functions or
parameters changes without notice or obligation. Please refer to the dealers for the latest details.
Safety Precaution
To insure the best from the product, please read all instructions carefully before using the device. Save
this manual for further reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Do not dismantle the housing or modify the module to avoid electrical shock or burn.
Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or
malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with fine ventilation.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit.Always unplug the power to the device before
cleaning.
Unplug the power cord when left unused for a long period of time.
Refer all servicing to qualified service personnel.
After-sales Service
We provide limited warranty for the product within three years counting from the first day you buy this
product (The purchase invoice shall prevail).
For more details, please contact your distributor.
Introduction
TPUH411RA is an Ultra-thin HDBaseT Receiver designed with audio de-embedded outputs. It receives
4K/1080p HDMI signal via CAT5e/CAT6a cable from HDBaseT Transmitter or Matrix Switcher at 131’/230’
Unit supports unidirectional PoH operation; the receiver can be powered by HDBaseT Transmitter or
Matrix Switcher.
Features
Supports HDMI1.4 & HDCP2.2, and is backward compatible to the previous version.
Maximum transmission distance is up to 40m (131ft) at 4Kx2K, and 70m (230ft) at 1080p.
Supports bi-directional IR and RS232 pass-through for long-distance control.
Supports unidirectional PoH for simplified wiring, and compatible with 48VDC PoC, the HDBaseT
Receiver can be powered by HDBaseT Transmitter or Matrix Switcher.
Supports audio de-embedded outputs.
Package List

Ultra-thin HDBaseT Receiver
2
1 x TPUH411RA Receiver
1 x 3-Pin Phoenix Connector (Male)
2 x Mounting Ears & 2 x Screws
4 x Plastic Cushions
1 x User Manual
Panel Description
Front Panel
No.
Name
Description
①
RS232 MODE switcher
CTRL: RS232 pass-through control mode;
UPDATE A: Update Valens IC program, connect a PC to the RS232
port, and then double-click the update file (.bat).
UPDATE B: Update the IC program which is used for de-embedding
audio, the upgrade method is the same as the above UPDATE A.
②
Link status LED
OFF: No Link; GREEN:Link successful.
③
HDCP compliant LED
OFF: No HDMI traffic (no picture); GREEN: Traffic with HDCP;
Blinking: Traffic without HDCP.
④
Power LED
OFF: No power; RED: DC power present.
Rear Panel
No.
Name
Description
①
RS232 connector
If one is connected with control device (e.g. PC), and the other should
be connected with the third-party that need to be controlled.
②
IR IN
Work with far-end IR OUT port, connect with IR Receiver (with carrier)
to collect IR signal to control far-end display device from local.
③
IR OUT
Work with far-end IR IN port, connect with IR Emitter to send IR signal
to control input source device.
④
HDMI OUT
HDMI typeA connector, connect to display.
⑤
AUDIO OUT
3.5mm stereo audio jack, connect to analog stereo audio device.
⑥
COAX OUT
Coaxial audio connector, connect to digital audio device.
⑦
OPTICAL OUT
Optical audio connector, connect to optical audio devices.
⑧
HDBT IN
Connect to the HDBT OUT socket on HDBaseT Transmitter or Matrix
HDCPLINK
UPDATE A CTRL UPDATE B
1234
Tx Rx
RS232 DC 12VIR OUT HDMI OUT HDBT IN
AUDIO
OUT OPTICAL OUT
IR IN COAX
OUT
123456789

Ultra-thin HDBaseT Receiver
3
Switcher via CAT5e/6a/7 cable, support unidirectional PoH
technology.
⑨
DC 12V power port
Connect to 12VDC power adaptor, or it can be powered via the
HDBaseT Transmitter or Matrix Switcher by unidirectional PoH
technology.
Specification
Video& Audio
Input
HDBT IN
Output
HDMI OUT; AUDIO OUT; COAX OUT; OPTICAL OUT
Control Ports
IR IN, IR OUT, RS232
General
Transmission Mode & Distance
HDBaseT; 1080P ≤ 70m; 4K×2K ≤ 40m
Resolution
Up to 4K×2K@60Hz 4:2:0
Bandwidth
10.2Gbps
HDMI Standard
HDMI1.4 & HDCP2.2
Power Consumption
10W (max)
Temperature
-10℃~ 50℃
Humidity
0% ~ 90%
Power Supply
Powered by HDBaseT Transmitter or Matrix Switcher
Dimension (W*H*D)
5.98”x6.3”3.94”
Net Weight (g)
7.8oz
System Diagram
Place power supply at Transmitter only.
Tx Rx
Tx Rx
IR Receiver
TV Remote
Laptop
IR Emitter
HDTV
4K 40m, 1080P 70m
Soundbar
Transmitter TPUH411RA
Speaker
HDMI:
HDBaseT:
RS232:
IR:
Audio: