Telefunken TF-LED24S80T2 User manual

LCD TV with LED backlight Телевизор цветного изображения жидкокристаллический (LCD) TF-LED24S80T2Instruction manualРуководство по эксплуатации
.

Table of contents
2Table of contentsDear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.
.

Before you start
3Before you startIf you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.Utilization of the productImportant safeguards•Please unplug the power cord from the ACoutlet and contact a service center for repair if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.•This unit can be connected to a powersupply outlet without the third ground contact as well as with a ground contact.•Always disconnect the power cord andantenna during a storm.•Do not fix the power cord with a metal nail.•Unplug the power cord from the AC outlet;also unplug the signal cables from the input ports when the unit is unused for long periods of time.•When unplugging the plug, always hold thewide slot, do not touch the metal part, and do not destroy, twist, pull or roast the power cord.•Please contact the service centerimmediately if you found that the core is showed in the air or has been broken.•Please replace the AC outlet if the metalbolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.•Never touch the antenna lie or power plugif it stars to thunder.•Do not touch the power plug with wethands.•Do not use any non-rated power socketwith numerous devices jointed on one power socket or cable device. The wire of non-designated capacity may cause the fire due to the generation of heat.•All instructions must be read andunderstood well before you operate the unit. Heed all warnings and follow all instructions.•Please use the accessories providedby the manufacturer. Using inadequate accessories may result in accidents.•Please adjust the product through thepanel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.•Over-press the panel may destroy theproduct.•Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product. •Please place the product on a flat surfacein a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.•Do not place any vase, potted plant, cup,medicine and any container with water on this
.

Before you start
44Before you startproduct. If the liquid is spilt, it may cause the fire, electric shock or breakdown.•Do not install it at the place on the strongmagnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.•Fasten the wheel of the product or shelfwith wheels when installing this product. If it moves or is tipped over, it may be damaged.•Do not place any fire source such ascandlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.•Do not place the unit into closed spaceof TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left, and right of the TV.•Please place all the signal cords behind ofrear panel.•Do not overexert or touch the panel whenyou convey the product. Do not transfer the LED TV up or down display direction.•Do not transport it with the power cordor the connection cable connected. If you move this product with the power cord or the connection cable connected, damaged power cord, connection cable or connection terminal may cause fire, electric shock or breakdown.•2 persons or more shall transport thedevice, which is heavier than 18 kg. If you drop or tip over the device, it may damage it.•The temperature of the product’s bodybecomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.All images provided herein are schematic drawings and may differ from real objects.WARNINGIn order to avoid damage, make sure to secure the unit on the wall according to the wall mounting instruction.Wall or ceiling mounting implements must be durable and sufficient enough to support the weight of the unit.InstallationWall mountingFor wall mounting the back panel of this unit is equipped with a VESA slot. A 75*75 mm VESA wall-mount bracket should be used for wall mounting. The wall-mounting bracket is not included and should be acquired separately. Manufacturer is not responsible for improper mounting resulting in a damage to the unit.Stand installationCover a flat stable surface with a soft cloth. Place the TV unit face-down on the cloth. Insert the support legs and fix them with supplied screws as shown below.
.

Before you start
55Before you startConnectionOutdoor antenna connectionUse 75 Ohm cable plug or 300-75 Ohm impedance converter to plug in antenna input terminal on the rear of the cabinet.Other connections•If the video source has a HDMI outputjack, you can connect the signal to the monitor with the HDMI cable (not included).•Optical output is intended fortransmitting multi-channel sound to an external decoder (e.g. in 5.1-CH format). Optical cable should be used for connection (not included).75 Ohm co-axis cableTVRF antenna jackAntenna cable connector•Connect your headphones or earphones(not included) to the headphone socket of this unit. When earphones are connected, the sound output through the built-in speakers of this unit is mute.•Plug the power cable in the electric outlet,making sure the current voltage is supported.•Connect the video source to theAV input using a CVBS cable (not included).•Connect the audio source to theLeft and Right stereo audio inputs.•CI slot is used for CI (PCMCIA) modules that are obtained from your digital TV provider.
.

Operation
66OperationControl elementsTV StatusPull Up / DownPull Left / RightPress OKPowered Off---Press to power on---Press to confirmPress and hold to go backOutside OSD menuChannel + / -Volume - / +In OSD menuMove Up / DownMove Left / RightPress to open the setting menuPress the rocker button to call the setting menu, where you can enter main menu, power off or select the source.•Menu: press to display the mainOSD menu.•Source: press to open the signal source interface.•Power: press to go to standby.•Exit: exit the setting menu.1.Remote control sensor2.Rocker buttonBack panel terminalsThe terminals are (from left to right):USB port, HDMI-2 (ARC) input, HDMI-1 (MHL) input, earphone socket, composite AV input.Back panel terminals (side)The terminals are (from left to right): TVRF antenna socket, CI (PCMCIA) slot, optical output.1
.

Operation
77Operation7KeysFunction Power( )16:9MUTE( )Number keys(0~9)List( )SOURCEMENUCursor keys(,,p,q)tuOKVOL+/-Return( )EXITCH+/-INFOSUBTITLEAUDIOADTTXRECT-ShiftREVEAL(EPG)INDEX( )ZOOM( )HOLD( )LANGUAGE( )Red keyGreen keyYellow keyBlue keySwitch between working and standby status.Switch the display mode.Turn on/off the sound.Enter numbers or select channel.View program list.Return to last watching channel.Select the signal source.(only in TV mode)Show the OSD menu.Select items or adjust values.Confirm the operation.Turn up/down the volume.Return to previous page.Exit the current interfaceChange program channel.Show the information of the TV program.Select subtitle language.Select audio language.Turn on/off the associated audio.Open teletext mode.Record programme. Time shift in DTV mode.Displays the hidden text in teletext mode.(Electronic channel instructions.)Displays the index page in teletext mode.(Play/pause function in multimedia)Adjust the teletext size.(Stop function in multimedia)Hold the displays at the current page.(Last file in multimedia).Change teletext language.(Next file in multimedia).Special function key
.

Operation
88OperationGeneral operations•Use two AAA batteries for the RC. The RCshould be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.•Take the battery out of the RC if it is notused for a long time.•Do not mix new and used batteries ordifferent types of batteries. Weak batteries can leak and severely damage the RC.•Do not expose the RC to shock, liquids,and do not place it in an area with high humidity.CAUTION!Incorrect installation of the batteries may lead to an explosion.Please replace used batteries with the batteries of the same or comparable type.Signal sourcesPress SOURCE, then press DOWN/UP cursor buttons on the RC or CH+/CH- buttons on the panel to select a source from the list. Press OK button on the RC or MENU button on the panel to confirm. Press EXIT to exit.Power•Connect the plug of the power cord to themains socket and press the POWERbutton to switch on the TV.•Do not leave your TV in standby mode fora long period of time; if you are not going to use the unit, disconnect it from power supply.•In TV mode the unit will automatically go tostandby mode if no signal for 5 minutes. Operations•Press VOL- button repeatedly to decreasethe volume; press VOL+ button repeatedly to increase the volume.•Press MUTE to mute sound, press thisbutton again or increase volume to resume sound.•Press button on the RC to select from the present channel and the previously 8displayed channel.Teletext operations (option)Select a TV channel in order to pick up the picture signal of Teletext. Teletext button functions are as follows:TTX: Press this button to enter into TEXT mode. Press the button again to return to the channel you are watching.HOLD: Press this button to stop the move to the next page. Press this button again to cancel operation.INDEX: Press this button to go to the index page. REVEAL: Press this button to reveal the concealed information. Press this button againcoto conceal the information.Red/Green/Yellow/Blue buttons: Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen.
.

Operation
99OperationOSD operation1. Press MENU button to enter the settingmenu displayed on the screen.2. Press LEFT/RIGHT cursor buttons to goto the needed setting page.3. Press UP/DOWN cursor buttons to selecta parameter to adjust.4.Press LEFT/RIGHT buttons to adjust theselected parameter.5. Press button to go back or EXIT to exit the menu. Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the actual menu tabs.Channel menu•ATV Manual Tuning:Current CH: select channel number.Color System: select corresponding colorsystem.Sound System: select corresponding soundsystem. Fine-Tune: perform fine adjustment of the current frequency. Search: press LEFT/RIGHT buttons; the unit will search for next available channel downward or upward and save it under the current number.•Programme Edit: this item allowsyou to sort TV programs according to your preferences. Enter the program edit menu:Delete: Select the channel you want to delete. Press red button to delete the channel.Move (not available for DTV channels with LCN): Highlight the needed channel. Press yellow button; select the position to put the channel into. Press yellow button to confirm.Favorite: Select the channel you want to edit. If this channel is your favorite channel, you can add it to your favorite channel list by pressing the green button.Skip: Highlight the needed channel. Press blue button; now this channel will be skipped when you select previous/next channels.Auto TuningDTV Manual Tuning ATV Manual Tuning Programme EditHide encoded Signal Information Software Update•Auto Tuning: press OK buttons to selectthe country and tune type for channels to start automatic search and saving of available ATV channels. After the search is finished, the unit will proceed to search DTV channels.•DTV Manual Tuning: Press LEFT/RIGHT cursor buttons to select channel number. Press OK button to start searching. When the nearest available channel is found, the search will stop and the channel will be saved under the selected number. Press MENU button to quit.•Signal Information: View the informationon the current signal.CHANNEL•Software Update: update the TVsoftware using a USB drive (only for experts).•Hide encoded: hides the encoded (paid)channels.
.

Operation
1010OperationPicture menuPicture ModeColor TemperatureNoise Reduction•Picture Mode: Standard/Mild/Personal/Dynamic. When Personal mode is selected, you can adjust contrast, brightness, colour, sharpness and tint (in NTSC) of the image.•Color Temp: Standard/Cold/Warm.•Noise Reduction: Dynamic noisereduction effect for reducing the video noise level. Select the Off/Low/Middle/High/Default mode.Sound menuSound Mode BalanceSurround Sound SPDIF Output AD Switch•Sound mode: Standard/Music/Movie/Sports/Personal. When Personal mode is selected, you can adjust treble and bass.•Balance: adjust the balance between theleft and the right speaker.•SPDIF Output: Select the digitalaudio output mode: Auto/PCM/Off. •Surround Sound: set thesurround sound effect on or off.•AD Switch (in DTV mode): This is anauxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume.Time menu TIMEPICTURESOUNDClockOff TimeOn TimeSleep TimerTime ZoneAuto SleepAuto Sync•Clock: set the system time if AutoSync is disabled.•Off Time: set the time for the TV to switch
off.
•On Time: set the time, channel and
volume for the TV to switch on. The TV must
be in standby for the On-timer to work.
•Sleep Timer: select the period until
automatic switch-off of the unit.
•Time Zone: select your time zone.
•Auto Sync: if on, the time willautomatically sync with the DTV signal.•Auto Sleep: select the period afterwhich the TV turns off automatically if no input is given.
.

Operation
1111OperationLock menu LOCKLock SystemSet PasswordBlock ProgramParental Guidance•Lock system: the feature can preventunauthorized operation of the TV set unless entering a 4-digit password. When Lock System is on and the system is locked, you must input the system password at Auto Tuning, Manual Tuning or Default. Press the right number buttons for the password. The default password is 0000 . After a password correction has been confirmed, please remember it for entering into the LOCK menu, all functions can not be activated until the correct password is entered. •Set Password: you can set your privatepassword. Press the number buttons on the remote control to set the new password. When the new password has been put in twice, the setting is finished successfully. The TV will go back to previous menu.•Block Program (in TV/DTV mode): pressGreen button to lock the available program you want. Press Green button again to unlock it.for viewing certain channels and programmes.•Parental Guidance: adjust the rating rulesOption menuOSD LanguageAudio Language Subtitle Subtitle Language Hearing Impaired PVR File System Recorded List Software Update (USB) Restore DefaultEnvironment•OSD Language: select thelanguage of the on-screen display (OSD).• Audio Language: select the languageof audio (available for some DTV channels).•Hearing Impared: When HearingImpaired is on, the screen will give some information to people whose hearing is impaired. When Off, the information will be hidden.•PVR File System (in DTV mode):Select Disc: select the storage used for PVR.Time Shift Size: select the time for TimeShift.Format: format the USB.Speed Check: display the speed of the storage.•Recorded List: view the list ofrecorded programs.OPTION•Subtitle/Subtitle Language: togglesubtitles on or off and choose its language (DTV).•Software update (USB): update TV
software using a USB storage device.
• Restore Default: reset the
parameters to initial factory settings.
•Environment: select one of theenvironment modes: Store Mode: Demo mode - used by stores to showcase the TV's capabilities. ECO Mode: Low power consumption mode.
.

Operation
12OperationElectronic Programme Guide (in DTV mode)Press the EPG button to display the Programme Guide menu. This function gives you the detailed information of the channel, indicating the time of the program playing. From the Programme Guide it is possible to check the program information for the next eight days (If the information is available from the broadcaster). Press EXIT button to quit.•Record: Press Red button to set theparameters of recording, The unit is able to do schedule recording when TV is turning on or in standby mode. You can set up several schedule recording. Different schedules should not overlap. When recording starts in standby mode, the front indicators will change color and there will be no picture or sound from the unit.You can press the POWER button to light up the screen.•Info: Press the INFO button to seethe detailed information of the current channel.•Remind: If you find the desired programwhich will be shown in the future. Press the green button to book program.Digital program recording Insert a USB, the system will automatically create a folder to store the files recorded. Recording begins when REC button is pressed, and it records all the time until STOP button is pressed or the memory is full. Please note the following about PVR: •USB storage device must have thecapacity of at least 512 MB and support the USB 2.0 standard. Some non-standard storage devices may not be supported•Try formatting the inserted storage devicewhen you have trouble recording.•Do not disconnect the device while theformatting is in progress. When you format the device, all data on it is deleted. It may be advisable to back up your files before formatting.•If the USB storage device has severalpartitions, the PVR system can record the data on any one of them.TimeShift function TimeShift is a feature enabling you to record an on-air digital TV program. Press the T-Shift button to activate TimeShift. The program is being recorded. You can pause and rewind. Press T-Shift again to resume the program. Press STOP or EXIT to disable TimeShift.CI Information (only in DTV mode): This function enables you to watch some encrypted services (pay services). Please insert a CI card into the PCMCIA slot according to the arrow on the CI card.•The function can only be availablewhen CI card is present.•It is possible for you to change CI(Common Interface) menu screen and service by consulting your dealer.•Please do not insert or pull out the CI cardwhen power on. During initialization of the CI card, please don’t operate the TV.•Do not insert or pull out the CI cardfrequently so as to avoid any damages of the TV and the CI card.•If there is no picture and/or sound with theCI+ CAM module inserted, please contact the customer support of the service provider.
.

Operation
1313OperationUSB operationGeneral information•This unit supports playback of video fileswith AVI, TS, MP4, MKV, MOV extension, with video codecs H264, MPEG2/4 and audio codecs AAC, DD(AC3). The above list of extensions and codecs is for information only and is not a guarantee that all files having the above extensions and codecs should be read by this unit. USB file systems supported: FAT32. 2.0 USB version is supported. Maximum capacity 1 TB. For correct and satisfactory operation, licensed USB devices of well-known brands should be used with this unit. Avoid using USB devices of unknown brands. Playback of photos and music of only JPEG and MP3 format is supported. The output capability of the USB port is 500 mA.•Some AVI files cannot be played due totheir parameters and recording conditions. Video files with AVI extension exceeding 2 GB in size may be played partially. According to the USB 1.1/2.0 Standard, usage of a USB device with power current consumption exceeding 500 mA is not recommended without supplementary power supply. Failure to use supplementary power for connected USB drives with power consumption exceeding this value as well as defective USB drives may cause mechanical or thermal changes of elements of this unit as well as failure of internal elements of the USB port. Such damages are not warrantee cases.Warning: usage of external USB drives containing BIN files in the root directory may cause malfunction of the unit or damage to the software.Operations of file playback•Insert a USB into the USB port. SelectUSB source and press OK button. The screen will show a USB playback window, in which you can select Movie, Music, Photo and File contents to play by pressing LEFT/RIGHT cursor buttons and OK button.•Press cursor buttons to select Returnoption and press OK button on the RC if you want to go back to the previous menu.•In the content menu, press cursor buttonsto select folder, press OK button on the RC to enter it, then press cursor buttons to select the file you want to watch or to listen to. When highlighting the file, the file information will appear and picture will be previewed (not available for music files). Press PLAY/PAUSE button on the RC to play the selected file.•While playback, press INFO button; thebottom of the screen will show playback menu in which you can select an operation by LEFT/RIGHT cursor buttons on the RC or perform this operation by pressing OK button on the RC. Some of the operations are as follows:Play or pause playbackAll filesSelect previous fileAll filesSelect next fileAll filesStop plabyack and return to previous menuAll filesSelect repat playback modeAll filesPlay music in background mode when photo or text file is being browsed (you should select music file first)Photo and TextShow playlistAll filesShow file informationAll filesRotate image clockwisePhotoRotate image anti-clockwisePhoto
.

General Information
14General InformationRewindMusic/MovieFast forward Music/MovieMute the soundMusic/MovieSelect time to start playback fromMusic/MovieFragment repeat playback. Press OK to select initial point, press OK to select final point of the fregmentMovieSlow playbackMovieStep playbackMovieZoom inMovie/PhotoZoom outMovie/Photo•While playback, press button to pause button to stop or resume playback. Press playback.•When you select a file to play, you candelete the selected file by pressing Red button, then OK on the RC.•When playing music files you can press/ buttons to fast reverse or forward. You can press / buttons to select the desired files manually in normal condition.•When playing text files, you can press LEFT/RIGHT buttons to page up or page down the file.
.

General Information
15General InformationTroubleshootingBelow is a table describing simple measures that can help you eliminate most problems likely to emerge when this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer.SymptomCauseSolutionNo picture, no sound, and no indicator lightThe power cord is not plugged in.Contrast, brightness, color and volume are all in the minimum value or TV is in mute mode.Plug the power cord in.Alter the value of contrast, brightness, color and volume.Picture and sound with abnormityContrast and color are set improperly.Color system is set improperly.Sound system is set improperly.Set the value of Contrast and color properly.Set the sound system properly.The picture in VGA mode is abnormalThe PC settings may be improper.Check and set the resolution parameters of your PC.Picture is spotted or with snowSignal source is low-grade or the signal is in a lower quality.Use the qualified signal cord.Blue backgroundNo video signal or the signal cord is improperly/not connected.Connect the signal cord properly.No soundNo audio signal or the signal cord is improperly/not connected.Connect the audio signal cord properly.Set the sound system properly.The RC does not workBatteries are improperly installed or exhausted.Make sure the positive and the negative polarities are correct.Reattach the battery lid.Replace the batteries.Causes of interferenceIncorporated in your TV receiver are the most up-to-date devices to eliminate interference. Local radiation however, can create disturbances, which visibly affect your picture. Proper installations, a good aerial are your best safeguards against these disturbances.•RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting orreceiving short-wave radio equipment.•DIATHERMY: Herringbone pattern and partial picture loss can result from the operation ofdiathermy equipment from a nearby doctor’s surgery or hospital.•SNOW: Weak TV signals from long distant stations result in an instead picture and give theeffect of falling snow. An antenna adjustment or antenna amplifier may be needed.•GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,hills, aircraft, etc. is minimized by correct aerial positioning.•CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the pictureor make the picture roll.
.

General information
1614General informationAccessories1. LED TV2. Remote controller3.Battery4.StandSpecificationsSize (diagonal)Response timeResolutionAspect ratioView angle (Horizontal/Vertical) Color systemSound systemNICAM StereoDigital audio output (Optical) AV in USB portHDMIDVB-T/DVB-T2/DVB-C signal reception PCMCIA slot (CI, CI+ support) Russian and English OSD Progressive scanDigital comb filterNumber of channelsElectric shock protection class Nominal voltage range:Unit dimensions: with standwithout standNet weight The LCD panel is a high technology product with many thin film transistors that can give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green, red, black or white, please note that this does not affect the performance of your LCD TV.Warning: For the sake of improvement, unit specifications may be subject to change without prior notice.1 pc1 pc2 pcs2 pcs2 pcs1 pc5.Screw6. Instruction manual++DTV 400, ATV 199 II~100–240 V; 50 Hz; 549 x 156 x 365 mm 549 x 67 x 327 mm 2.2 kg+23.6” (60 cm)8.5 ms1366 x 76816:9178°/178°PAL, SECAM B/G, DK, I2 x 4 W++++++
.

Содержание
1715СодержаниеУважаемый покупатель!Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте руководство для использования в будущем.Перед покупкой рекомендуется провести проверку оборудования:-на отсутствие механическихповреждений конструкции, внешнегооформления и упаковки, нафункционирование, на сохранностьпломб, на соответствие комплектапоставки данным раздела"Комплектность". Проведение проверкина функционирование являетсяобязанностью продавца;-на наличие гарантийного талона-на правильность простановки вгарантийном талоне даты продажи иштампа продавца.Рекомендуется сохранять товарный (кассовый) чек, руководство по эксплуатации с гарантийным талоном до конца гарантийного срока эксплуатации.
.

Перед началом эксплуатации
1816Перед началом эксплуатацииЕсли вы желаете утилизировать данное изделие, не выбрасывайте его вместе с обычным бытовым мусором. Существует отдельная система сбора использованных электронных изделий в соответствии с законодательством, которая предполагает соответствующее обращение, возврат и переработку.Обращайтесь в органы местного управления за инструкциями по правильной утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с соблюдением обязательных процедур по обработке, утилизации и вторичной пере-работке и, таким образом, предотвратите потенциальное негативное воздействие на окружающую среду и здоровье людей.Утилизация изделияМеры предосторожности•Пожалуйста, извлеките шнур пита-ния из розетки и свяжитесь с сервисной службой в следующих случаях: если в устройстве имеются явные неисправности, например, из него идет дым, чувствуется специфический запах или слышен неха-рактерный звук; если внутрь устройства попала жидкость или посторонние предме-ты; если нет изображения или звука; если поврежден корпус или панель; если Вы пользуетесь устройством согласно инструк-ции, но оно не работает должным образом.•Данное изделие может подключатьсяк розетке питания как без заземляющего третьего контакта, так и с заземляющим третьим контактом.•Во избежание поражения электриче-ским током защищайте шнур питания от возможного нажатия на него или защемле-ния, особенно рядом с разъемами.•Не закрепляйте шнур питания метизами.•Если Вы не пользуетесь устройствомдлительное время или в случае грозы обязательно отключайте шнур питания из розетки, а также отключайте все сигналь-ные кабели от входных разъемов.•При отключении вилки из розетки всег-да держитесь за утолщение на вилке, не касайтесь металлических частей, не тяните за шнур и не ломайте и не перегибайте его, не ремонтируйте, не перекручивайте и не нагревайте.•Немедленно свяжитесь с сервиснымцентром, в случае если имеются какие-либо неисправности шнура питания, в нем оголи-лись жилы или он поврежден.•Замените сетевую розетку, если внее невозможно вставить вилку или вилка плохо закрепляется в розетке. Иначе могут возникнуть неисправности или произойти несчастные случаи или возгорания.•Не прикасайтесь к проводам мокрымируками.•Запрещается использование розетки, вкоторую подключено несколько устройств. Перегрузка такой розетки может привести к пожару.•Место подключения вилки шнурапитания к сети 220 В должно оставаться легкодоступным.•Перед работой с устройством необ-ходимо полностью прочитать и понять все инструкции. Необходимо соблюдать все пред-упреждения и следовать всем инструкциям, приведенным в настоящем руководстве.•Пожалуйста, используйте только реко-мендованные производителем аксессуары.
.

Перед началом эксплуатации
1917Перед началом эксплуатацииИспользование других аксессуаров может привести к неисправностям.•Пожалуйста, проводите все настройкии регулировки только с помощью кнопок на передней и боковой панелях или на пульте дистанционного управления. Ни в коем случае не снимайте заднюю панель и не пытайтесь самостоятельно проводить техническое обслуживание устройства, так как существует опасность поражения электрическим током, а также возможно возникновение неисправностей.•Не устанавливайте устройство нанепрочные или неровные поверхности, тележки, стойки, треноги, кронштейны или столы. Устройство может упасть, в результате чего могут возникнуть неисправ-ности или произойти несчастные случаи. Используйте только те приспособления, которые рекомендованы производителем или продавцом.•Пожалуйста, устанавливайте устрой-ство на горизонтальной поверхности в ме-стах с хорошей вентиляцией. Не допускайте воздействия на устройство вибрации, пря-мого солнечного света, высокой температу-ры, а также попадания пыли и влаги.•Не ставьте на устройство вазы, сосудыс жидкостью. Попадание жидкости внутрь аппарата может привести к пожару или по-ломке устройства.•Не устанавливайте устройство в зонемагнитных волн. Это может привести к по-ломке устройства. В зоне электромагнитно-го излучения может наблюдаться искаже-ние изображения.•Не устанавливайте вблизи устройстваисточники открытого огня, например, свечи. В случае их падения устройство может быть повреждено или может произойти возгора-ние.•Установка телевизора в замкнутоепространство при эксплуатации может со-кратить срок службы устройства; поэтому необходимо обеспечить минимальную дистанцию между LED-телевизором и внутренними границами приспособления под аппарат для нормальной вентиляции (минимум по 10 см свободного простран-ства со всех сторон).•Располагайте кабели позади устрой-ства. Не закрепляйте их метизами, не пере-гибайте, не ремонтируйте и не нагревайте.•При перемещении телевизора ненажимайте и не касайтесь панели. Не пере-носите телевизор в положении, при котором экран направлен вверх или вниз.•Не перемещайте устройство при под-ключенном проводе питания или других подключенных проводах. Повреждение про-вода питания, подключенный провод или подключенные устройства могут стать при-чиной пожара, электрошока или поломки.•Если устройство тяжелее 18 кг, его должны перемещать не менее 2 человек. При падении устройство может повредиться.•Слишком сильное нажатие на панельможет повредить устройство.•При длительном использовании можетнемного повысится температура корпуса устройства. Это явление свидетельствует о теплоотдаче в нормальном рабочем режи-ме. Однако не позволяйте детям и людям с повышенной температурной чувствительно-стью касаться устройства.После транспортировки в холодную погоду (ниже 5° С) рекомендуется не включать телевизор в течение как минимум трех часов: за это время он нагреется до комнатной температуры, а весь конденсат испарится.Все иллюстрации, приведенные в на-стоящем руководстве, являются схе-матическими изображениями, которые могут отличаться от реальных объектов.
.

Перед началом эксплуатации
2018Установка/ПодключениеУстановка
Крепление на стену
Установка на подставку
Выберите ровную плоскую горизонталь-
ную поверхность, накройте ее мягкой тка-
нью и разместите на ней корпус телевизора
экраном вниз. Присоедините ножки-под-
ставки таким образом, чтобы отверстия в
подставках и в корпусе телевизора совпа-
дали. Зафиксируйте с помощью входящих в комплект винтов.
Для крепления на стену на задней панели телевизора имеются отверстия стандарта VESA (расстояние между отверстиями: 75 х 75 мм). Используйте эти отверстия, что-бы прикрепить панель телевизора к настен-ному кронштейну (кронштейн в комплект поставки не входит приобретается отдель-но). Производитель не несет ответственно- сти за неправильно выполненный монтаж, повлекший повреждение телевизора.ПРЕДУПРЕЖДЕНИЕВо избежание повреждений надежно закрепите аппарат на стене в соответствии с требованиями инструкции по установке.ВНИМАНИЕ - До включения аппаратуры в электрическую сеть необходимо ознакомиться с мерами электрической и противопожарной безопасности, приведенными в разделе "Меры предосторожности" настоящего Руководства по эксплуатации.
.