Tellur TLL331481 User manual

TLL331481 / TLL331491
User manual
Manual de utilizare
Manual del usuario
Manuel d’utilisation
Manuale d'uso
Benutzerhandbuch
Wi-Fi Smart switch

Thank you for choosing Tellur!
To ensure an optimum performance and safety, please,
read this user manual carefully before using the product. Keep this
user manual safe for future references.
EN
1. Important notes and cautionary tips:
Warning: Make sure to switch off the power supply before installing or
maintaining the product!
To avoid the risk of fire or electric shock, please make sure you install
the product following its electrical rating (AC100-240V).
The installation of the Smart Switches requires electrical knowledge.
We recommend that the installation to be made by a qualified
electrician.
To avoid wiring damage or abrasion, do not expose the wire to edges of
metal or other sharp objects.
Don’t connect a device that exceeds the max. load current for this
product, otherwise may cause product damage or personal injury.
Don’t use the product if it is damaged in any way, shape, or form.
Don’t attempt to repair, disassemble, or modify this product.
Don’t use the product in a humid, moist, or wet environment. Always
keep the device dry and clean.
Don’t place the product near any heat source or in direct sunlight.
2.What's in the box
Wi-Fi Smart Switch with 1 port (TLL331481) or 2 ports (TLL331491)
Mounting screws
Metal adapters
Quick connectors
Capacitor

EN
3. Product overview
ON/OFF/Pairing touch button(s)
(N) Neutral wire terminal
(L) Live wire terminal
(L1 / L2) Lamp wire terminal

EN
4. Technical specifications:
Voltage: AC 100-240V
Max power: LED: Max 150W/port, Incandescent: Max 600W/port
Standby power consumption: ≤0.3W
Panel material: Tempered glass
Connection method: With or without Neutral wire
Wireless frequency: 2.4GHz
Wi-Fi standard: IEEE 802.11b/g/n
Security: WEP, WPA/WPA2, WPA/WPA2 PSK (AES), WPA3
Encryption type: WEP/TKIP/AES
APP Name: Tellur Smart
APP Compatibility: Devices with Android 4.2 / iOS 8 or more recently
Google Home: Compatible
Amazon Alexa: Compatible
Siri Shortcuts: Compatible
Suitable for: Indoor use
Working condition temperature: -20°C ~ 40°C
Working condition humidity: ≤80%
Product dimensions: 86mm*86mm*36mm EU standard
Product weight: 129g / 132g
5. Product installation
Warning: Make sure to switch off the power
supply before installing or maintaining the
product!
Make sure you have all accessories needed and
proper tools for installation.
Carefully remove the glass panel from the bottom
side using a flat screwdriver.

EN
The switch socket with Neutral (N) wire
terminal supports the following wiring method:
• Live wire (L) connects to L terminal.
• Lamp wires connects to L1, L2, L3 terminal.
• Neutral wire (N) connects to N terminal.
Wiring diagram – socket with Neutral wire (method 1)
The switch socket with Neutral (N) wire
terminal supports the following wiring
method:
• Live wire (L) connects to L terminal.
• Lamp wires connects to L1, L2, L3 terminal.
• The capacitor connects to L1 and N
terminal.
Wiring diagram – socket without Neutral wire (method 2)
After the wiring is complete, mount the switch to the wall socket and
secure it using the screws included.
Connect back the glass front panel and turn the power back on.

EN
6. Pairing the device with Tellur Smart APP
Note
Mare sure your phone is connected to the 2.4GHz wireless network
and you have access to Wi-Fi password before you start the pairing
procedure.
The app doesn’t support Wi-Fi 6 networks with 802.11ax standard.
Please set the 2.4GHz Wi-Fi network to 802.11b/g/n
We also recommend having the Bluetooth function activated for an
easier pairing.
Download and install the Tellur Smart app, available for either iOS or
Android devices
Once downloaded, the app will
ask you to create an account (if
you don’t have any already).
Enter your email, select the
country you live in and create a
password for your Tellur Smart
account.

EN
***Set up router
This device only supports 2.4GHz frequency band router, does not
support 5GHz frequency band router. Please set the relevant
parameters of the router before Wi-Fi configuration, Wi-Fi
passwords do not include special characters such as ~! @#$%^&*().
When the device is being connected to the Wi-Fi, keep the mobile
phone and device close to the router to speed up the configuration of
the device.
Open the Tellur Smart app and click “Add device” or “+” and then
select “Electrical Engineering” -> “Switch (Wi-Fi)”.

EN
1. When connecting, make sure the area where the switch is
installed have strong network signal.
2. Power on the switch and wait until the touch button LED is
flashing quickly.
3. If the LED doesn’t flash, long press one of the ON/OFF buttons for
about 10 seconds.
4. Confirm the LED is flashing quickly in the app interface.
5. Select the Wi-Fi network, input your Wi-Fi password and click
"Next".
6. Wait for the device to be added automatically. Tap “Done” when
finished and the device will appear in your list.

EN
7. Failed to add device?
- Make sure the device is powered on.
- Check the Wi-Fi connection of your phone.
- Check if the device is in pairing mode. Reset your smart device to
enter pairing mode.
- Check router or related: If you use a dual-band router, select the
2.4GHz network to add the device. You also need to enable the router's
broadcasting function. Set encryption method as WPA2-PSK and
authorization type as AES or set both on "auto".
- Check if the Wi-Fi signal is strong enough. To maintain the signal
strong, keep your router and the smart device as close as possible.
- Wireless mode should be 802.11.b/g/n (Wi-Fi 6 protocol 802.11ax is not
supported)
- Make sure you don't exceed the maximum number of registered
devices supported by the app (150).
- Check if the router's MAC filtering function is enabled. If so, remove
the device from the filter list and make sure the router is not prohibiting
the device connection.
- Make sure the Wi-Fi password entered in the app is correct.
Can I control the device with 2G/3G/4G network?
When adding the device for the first time, the device and the phone need
to be connected to the same Wi-Fi network. Once the device has been
successfully paired with the Tellur Smart app, you can remotely control
it via 2G/3G/4G networks.
How can I share my device with family?
Open Tellur Smart app, go to "Profile" -> "Device sharing" -> "Sharing
sent", tap "Add sharing" and share the device with the added family
members.
Notice - users must install the Tellur Smart app on their device in order
to see shared devices.
How can I manage the devices shared by others?
Open App, go to "Profile" > "Device Sharing" > "Sharing Received", then
you can find the devices shared by other users. To delete a shared
device, swipe left.

EN
- Make sure the device is powered on.
- Check the Wi-Fi connection of your phone.
- Check if the device is in pairing mode. Reset your smart device to
enter pairing mode.
- Check router or related: If you use a dual-band router, select the
2.4GHz network to add the device. You also need to enable the router's
broadcasting function. Set encryption method as WPA2-PSK and
authorization type as AES or set both on "auto".
- Check if the Wi-Fi signal is strong enough. To maintain the signal
strong, keep your router and the smart device as close as possible.
- Wireless mode should be 802.11.b/g/n (Wi-Fi 6 protocol 802.11ax is not
supported)
- Make sure you don't exceed the maximum number of registered
devices supported by the app (150).
- Check if the router's MAC filtering function is enabled. If so, remove
the device from the filter list and make sure the router is not prohibiting
the device connection.
- Make sure the Wi-Fi password entered in the app is correct.
Can I control the device with 2G/3G/4G network?
When adding the device for the first time, the device and the phone need
to be connected to the same Wi-Fi network. Once the device has been
successfully paired with the Tellur Smart app, you can remotely control
it via 2G/3G/4G networks.
How can I share my device with family?
Open Tellur Smart app, go to "Profile" -> "Device sharing" -> "Sharing
sent", tap "Add sharing" and share the device with the added family
members.
Notice - users must install the Tellur Smart app on their device in order
to see shared devices.
How can I manage the devices shared by others?
Open App, go to "Profile" > "Device Sharing" > "Sharing Received", then
you can find the devices shared by other users. To delete a shared
device, swipe left.
8.Alexa integration
1. Go to Home menu on Alexa app.
2. Select "Skills" / "Skills & Games".
3. Type Tellur Smart in the search bar.
4. Select Tellur Smart and click "Enable" to activate Tellur Smart.
5. Enter your Tellur Smart account and password. Now you have finished
the integration with Alexa.
Tellur Smart app is now skilled with Alexa, and you can vocally control
the devices added in Tellur Smart.
Remember - if you rename your smart devices, use a simple name that
Alexa can recognize.
1. 2. 3. 4. 5.