Teltonika TMP-102 User manual

TELTONIKA T-ModemPCI (TMP-102)
User Manual V1.0

2
Contents
Introduction..............................................................................................................................................3
1. Package contents .................................................................................................................................4
2. Technical specifications......................................................................................................................5
2.1. Data transferring..........................................................................................................................5
2.2. Mechanical specifications ...........................................................................................................5
2.3. Electrical and operating specifications .....................................................................................6
2.4. Indication ......................................................................................................................................7
3. Modem instalation and setup.............................................................................................................8
3.1. Connecting to PC ........................................................................................................................8
3.2. Installing of Modem driver ........................................................................................................8
3.3. Installation of “T-Modem Control Tool”..............................................................................10
3.4. Changing of security setting.....................................................................................................11
3.5. Controlling of Server.................................................................................................................11
3.6. Getting connected to the Internet...........................................................................................15
3.7. Internet connection settings.....................................................................................................16
4. TechniCAL SUPPORT ....................................................................................................................18

3
INTRODUCTION
In this document you will find a detailed description how to install and to use the “T-
ModemPCI” modem as well as software to operate it.
“T-ModemPCI” device is a modem for data transfer via GSM network. The Modem is designed
to be mounted into motherboard of a PC. Once the device is mounted to the motherboard you can
access the Internet using a GSM channel for data transferring. “T-ModemPCI” supports the following
data transfer channels: EDGE, GPRS, CSD, HSCSD, SMS. The device can function as a “watchdog”
timer, watching over the PC temperature and van velocity.

4
1. PACKAGE CONTENTS
‘T-ModemPCI” is supplied to clients in carton with all contents, which are needed for
connection to PC and normal work:
1) Carton,
2) “T-ModemPCI” modem,
3) A CD with User’s Guide and drivers,
4) An external GSM antenna (just upon special orders of customers),
Notice: the producer does not provide a SIM card among other items of a package, which is necessary
for connection to GSM Network! You can obtain a SIM card from your local GSM service provider!
If any of the components is missing please contact your local distributor.

5
2. TECHNICAL SPECIFICATIONS
2.1. Data transferring
“T-ModemPCI” supports all bearers of GSM Network. Which data channel is used
depends on GSM operator and data transfer capacity in the chosen GSM Network.
•EDGE 2 class (up to 118,4 kbps),
•GPRS 6 class (up to 56-114 kbps),
•HSCSD (up to 43.2 kbps),
•CSD (up to 14,4 kbps),
•SMS textual messages.
2.2. Mechanical specifications
“T-ModemPCI” modem is a board, which is mounted into motherboard of a PC. The modem
is connected to the motherboard using a PCI connector. External dimensions and measures of the unit
are shown in picture 1.
1 pict. An external look and measures of the modem

6
2.3. Electrical and operating specifications
The MODEM is supplied from Motherboard’s PCI connector of a PC. The supply voltage is
+5V. A PC to which the “T-ModemPCI” modem is going to be connected must have PCI interface.
Electrical parameters of the device are shown in Table 1.
Table 1. Device specifications
Parameter Min Typical Max Measr.
Units
Power supply Voltage +5 +5 V
Average Power consumption 2 W
Maximum Power consumption 1 10 W
1Does not last more than 1.2 ms
The operating conditions and other characteristics are shown in Table 2.
Table 2. Operating conditions and other data.
Parameter Min Nominal Max Measr.
Units
Weight 100±5 g
Recommended operating
temperature
+15 +35 ºC
Marginal operating
temperature
-25 +25 ºC
Storage temperature -40 +85 ºC
Notice: if the settings outreach the characteristics given above the device can be damaged!

7
2.4. Indication
“T-ModemPCI” has 2 LEDs for indication. They are located at the top part of the device. Due
to these indicating LEDs we can determine in which mode is the device operating, are there any
shortcuts in its functionality or not. The indication status of the modem is given in the Table 3.
Table 3. Modem status description.
“Power” is on Power supply is connected.
“Status” is green and blinking Modem is powering up
“Status” is green The device is ready to use
“Status” is yellow and blinking No SIM card inside, no PIN code entered
or any possibility to connect to the GSM
Network
“Status” is yellow The device has successfully connected to
the Network for data transfer

8
3. MODEM INSTALATION AND SETUP
3.1. Connecting to PC
1) Turn Off your PC;
2) Insert SIM card into the mode. Follow the instructions on the device sticker. Make sure, the
SIM card is pushed inside till it fixes;
3) Mount the “T-ModemPCI” modem into the Motherboard of a PC;
4) Connect an external GSM antenna to the “T-ModemPCI” board;
5) Turn on the PC.
3.2. Installing of Modem driver
1) Turn your PC on and wait until the OS boots;
2) Insert a CD supplied in the carton package
into CD ROM;
1. “Windows XP” OS will automatically detect a
new device “PCI Simple Communications
Controller”. “Found New Hardware Wizard”
dialog box will appear. In the opened dialog box,
select “No, not this time” and press “Next” button;
2. “Found New Hardware Wizard” dialog box will
appear. In the opened dialog box, select „Install
from a list or specific location (Advanced)“ and
press “Next” button;
3. “Found New Hardware Wizard” dialog box will
appear. In the opened dialog box, select “Include
this location in the search” and press “Next”
button;
4. “Hardware Installation” dialog box will appear.
Stating that there has been performed any “Windows
Logo” testing to the driver select “Continue
Anyway”;

9
5. “Found New Hardware Wizard” dialog box will
appear. A successful „NetMos 9835 PCI Multi-I/O
Controller” installation message will appear;
6. Further in the same way install a parallel port
(“NetMos PCI ECP Parallel Port”) and two serial ports
(“NetMos PCI Serial Port”);
7. Once the ports have been installed, a “Hardware Update Wizard” dialog box will appear. Select
“No, not this time” and click “Next”;
8. “Hardware Update Wizard” dialog box will appear. In the opened dialog box, select „Install from a
list or specific location (Advanced)“ and press „Next“ button. “T-ModemPCI modem installation will
begin;
9. After completing the “Found New Hardware Wizard” click “Finish”;

10
Windows 2000 OS: Make Windows XP installation steps (1 – 9)
3.3. Installation of “T-Modem Control Tool”
1.The installation program should start
automatically. If it is not the case, so find a catalogue
“Software” in the CD and start “setup.exe” file. The
first “T-Modem Setup” dialog box will be opened;
2.Press “Next” button in the opened box. A second
“T-Modem Setup” dialog box will appear;
3. You can select a preferable driver
installation way in the dialog box. When
“Typical” installation is chosen, a standard driver
will be installed. When “Custom” installation is
chosen, you can install separate driver
components and show the driver installation
folder. When “Complete” installation is selected,
a complete driver installation will take place. It is
recommended to select a “Custom” installation.
The third “T-Modem Setup” dialog box will be
opened;
4. “T-Modem Setup” dialog box will appear. Press
“Next” in the opened dialog box;
5. “T-Modem Setup” dialog box will appear.
Press “Install” in the opened dialog;
6.“T-Modem Setup” dialog box will appear. Enter
dial-up settings in the ialog box. The dial-up
settings are automatically read from a “*ini” file on
d
the CD. Should the parameter fields appear empty
the user has to fill in them by him self. He can
obtain the dial-up settings by his GSM operator.
The settings being filled in the “Next” button must
be clicked;

11
7. A new „T-Modem Setup“ dialog box will state a
successful „T-Modem Control Tool“ installation
process. Press „Finish” button.
3.4. Changing of security setting
For SIM security a unique PIN (Personal Identification Number) is used. Before starting using
GSM network services, it is necessary to enter a PIN code. “T-ModemPCI” supports two main GSM
security modes: “PIN code enabled”, “PIN code disabled”. When “PIN code enabled” mode is chosen,
the PIN code will be required each time the modem is turned on. If the mode „Disabled“ is chosen,
PIN code has to be entered just once and this will not be required further on while turning the device
on.
“T-Modem Control Tool” program is used for changing security settings.
Activating PIN:
1) Start “T-Modem Control Tool”;
2) Select “Search For T-Modem”;
3) Select “Modem -> PIN query”;
4) Select “PIN code enabled” and click OK.
Deactivating PIN:
1) Start „T-Modem Control Tool“;
2) Select „Search For T-Modem“;
3) Select „Modem -> PIN query“;
4) Select „PIN code disabled“ and press OK;
5) A new dialog box will appear, where a PIN of a
SIM card should be entered
6) Enter PIN and press OK
7) If the PIN code is entered correctly, a message
will appear confirming the cancellation of PIN
code checking.
3.5. Controlling of Server
“T-ModemPCI” modem could be applied as a “watchdog” timer and restart a server should it not
respond within a predefined time. “T-ModemPCI” provides an additional Internet connection
channel for servers. System administrators could use this safe connection channel for server
configuration. You can control a COM port of a server directly from your PC. It also gives you the
possibility to send SMS messages from your PC.

12
T-ModemPCI
Internet
GSM
Serveris
Administratoriaus AK
Administratoriaus telefonas
The admin r. In order to make this following steps should be
performed:
1. Install a Nokia 12 Configurator driver:
r installation file on the CD;
2) Once the file has been started, the first
“Install r. Press
“Next” button in the opened dialog box. The second
“InstallShield Wizard” dialog box will appear;
3) Press “Yes” in the new dialog box. Third dialog box
of “InstallShield Wizard” will appear;
istrator himself can restart a serve
1) Click “Nokia12Configurator” drive
Shield Wizard” dialog box will appea

13
4) Press ‘Next”. The forth “InstallShield Wizard” dialog
box will show up;
5) Then press “Next” button. The fifth “InstallShield
Wizard” dialog box will be opened;
6) Press “Next” button. The sixth “InstallShield
Wizard” dialog box will appear, stating that the drivers
has been successfully installed;
arameters” button and select “General IO”
and then press “Write parameters”;
7) Press “Finish” button in the new dialog box.
2. Start “Nokia12Configurator”. Select ‘File/Module
Configuration” in the main configurator window. A
“Module Configuration” dialog box will appear. Press
“Read p

14
3. Select “User Control Module” in the main
window of “Nokia12Configurator”. “User
Control Module” window will show up;
4. Press “Re
(option) “Ini
ad parameters” button on the sheet
tialize” in the opened window. Once
cation name (f.e. “opa”)
tification name has been entered press
t
button;
6. In “User Control Mode” window, in
“Aliasing” section you can create a name of a
rebooting command (f.e. “Turn on 1” and
ite parameters” button;
7. In order to ensure the functionality of a
rebooting program it is necessary to connect a
Motherboard “Reset” cable to the “T-
ModemPCI” modem. For that purpose a special
cable is needed. Connecting of the cable is shown
in the picture bellow;
this has been done, in the “Message Identifier”
field “Identifier” identifi
will show up. You can change this identification
name while clicking on “Change” button. Once a
new iden
“Write parameters” button;
5. Select “Security” option (sheet) in the “User
Control Module” dialog box. Then press “Read
parameters” button. Enter a password in the
“Authentication” section in “Password” field (f.
e. “opa”). Repeat the password in the “Confirm
password” field. Press “Write parame ers”
“Turn off 1”). Program used for rebooting are:
“UOTPUT_SET 6 ON”, “UOTPUT_SET 6 OFF” or
7 OFF”. Once the names have been created, press “Wr
“UOTPUT_SET 7 ON”, “UOTPUT_SET

8. Once the setting-up is finished, in order to rebo
The contents of the first SMS should provide:
(“Password”) and port activation command. (f.e. “opa opa Turn on 1”) or
2”)
ot a server, it is necessary to send two SMS.
an identification name (“Identifier”), password
(f.e. “opa opa Turn on
. “opa opa Turn off 1”) or (f.e.”opa opa Turn off
3.6. Getting connected to the Internet
Before connecting to the Internet we recommend you to consult your local GSM provider. It
sho ing the Internet settings of your device. In this
cha prepare and set up your PC for Internet
con
Bef
You have got a GSM SIM card with activated data transferring service;
•T-ModemPCI is ready to work – SIM card is pushed in, the device is
correctly connected to the PC, the drivers are properly installed;
•Dial-up networking is installed on your PC (OS);
•TCP/IP protocol support is installed on your PC (OS);
The contents of the first SMS should provide: an identification name („Identifier“), password
(“Password”) and port deactvation command. (f.e
2”)
9. After reception of these two SMS the server will reboot.
uld provide you with the detailed information regard
pter we well provide you with general information how to
nection.
ore you proceed make sure that:
•
15

16
T-ModemPCI supports two different types of data transferring:
•GPRS, EDGE packet data transfer. In this case you have to know APN,
user name and password;
•CSD, HSCSD data transfer. You have to know a phone number of a dial-up
server;
If GPRS/EDGE for data transfer is used, you have to set up an APN (Access Point Name).
1) Select “T-Modem Control Tool”;
2) Select ‘Search For T-Modem”;
3) Select ‘GPRS -> Settings”;
4) Select an appropriate modem and enter APN;
3.7. Internet connection settings
Getting connected to the Internet:
1. The dial-up connections being set, start “T-Modem
Control Tool” program. The program can be started
also from the PC desktop while clicking on the shortcut.
When the shortcut will be clicked, “T-Modem Control
Tool” dialog box will be opened;
2. The program should automatically detect a
nnect” in order to get access to the Internet;
ect” is clicked, the modem will start
connected modem. If this does not happen, select
“Autodetect” function in the field “COM port”. This
function being set, press “Search for T-Modem” button.
The program will find a connected modem. Click
“Co
3. When “Conn
establishing connection to the Internet;

17
3.8. Se
1. Using “T-ModemUSB” it is possible to send and
receive short text m s
that “T-ModemUS
d
w
2. In order to review SMS in the main “T-Modem
Control Tool” window click with the left mouse-button
on “SM O i-choice field
will be opened. With the left mouse-click on the
“Messa a
3. In this box you can
review the received and
unnecessary SMS. If you want to send SMS, click in the opened main “T-Modem Control Tool”
bS” dialog box will appear. Click with
th will appear;
4. In the opened dialog box in the
field “Text” is where a SMS text should
be written. “Symbol left:” shows how
much symbols rest. A recipient’s phone
number should be given in the field
“Phone number”. Once the SMS text
has been entered and the phone
number of a recipient given, press
“Send” button and your message will be
sent.
nding Short Text Messages (SMS)
es ages (SMS). Before starting using
B” function it is obligatory to
isconnect from the Internet. This will be performed
ile clicking on “Disconnect” button;h
S”. nce this has been done, a mult
ges” “Messages” dialog box will be opened;
sent SMS. In the field
“Messege Storage” you
can choose a SIM
memory. The memory is
read when clicking on
“Refresh” button. A
“Delete” button is used
for deleting marked
ox with the left mouse button on “SMS”. A new “Send SM
e left mouse button on “Send”. A “Send SMS” dialog box

18
4. TECHNICAL SUPPORT
This sign on the package means that it is ne
is on the CD before you start using the dev
cessary to read a User Manual, which
ice.
ectronic and electric equipment should
If you have faced some problems using the device, which you are not able to solve by yourself,
you are always welcome to address our technical support by the email: supp
be glad to help you.
This sign on the package means, that used el
be stored separately.
[email protected]. We would