TELUS ADC-V522IR User manual

NOTE
For wall mounting installation see Steps 8-10.
Check Your Wi-Fi Speed at LocationSelect a Location
1
No Wi-Fi?
If you are unable to nd a location with adequate Wi-Fi
coverage, please contact TELUS for assistance.
The Indoor Camera requires a minimum of 2.5 Mbps
upload speed to operate. In a browser on your
smartphone visit telus.com/speedtest to determine
the Internet speed at your chosen location.
2
Indoor Wi-Fi
Security Camera
Installation
Guide
ADC-V522IR
Before You Start
What’s in the box?
Indoor Camera
ADC-V522IR
Mounting
Plate
Power
Supply
Wall
Screws
Drywall
Anchors
You’ll need:
Screwdriver Pencil
Smartphone or Tablet 2.5 Mbps Upload Wi-Fi
Drill 6mm (1/4 inch) Drill Bit
Optional
Watch the installation video at
telus.com/IndoorCamera or scan
the QR code.

Forgot your SmartHome Security log in?
Learn how you can recover it.
Password
Email/Username
Log in
SmartHome Security
WPS
RESET
Flashing
Flashing
LED not ashing white?
Press and hold the WPS/RESET
button for 6 seconds until the light
starts ashing white.
15 seconds
WPS
RESET
Turn On Camera
3Get the TELUS SmartHome App
4
Download the TELUS SmartHome app,
then log in with your My TELUS credentials.
WPS
RESET
x
x
x
x
x
x
x
x
x
x
x
x
H
W
V
:
x
x
x
x
x
WPS
RESET
x
x
x
x
x
x
x
x
x
x
x
x
H
W
V
:
x
x
x
x
x
Add Indoor Camera to Your Account
5Connect to Temporary Wi-Fi Network 6
SmartHome1’s system

Optional: Route Cable Optional: Attach Camera
WPS
RESET
WPS
RESET
910
Select Network
My Wi-Fi
Scan for Networks
Setup Manually
Home
COPY NETWORK SETTINGS
OTHER NETWORKS
Select Network
My Wi-Fi
Scan for Networks
Setup Manually
Home
COPY NETWORK SETTINGS
OTHER NETWORKS
Installing...
Living Room
Install Another Video Device
Waiting for camera
to connect...
This process may take a few minutes
Installing...
Living Room
Install Another Video Device
Waiting for camera
to connect...
This process may take a few minutes
Connect to Temporary Wi-Fi Network
Follow Steps in App
7
TIP
You can also attach the mounting bracket by drilling
holes and using the drywall anchors provided.
Drywall Anchors6mm (1/4 inch) Drill Bit
Optional: Mount Wall Plate
8

Customize Smart Video Alerts
SmartHome1’s system
Living RoomLiving Room
11
Forgot your SmartHome Security log in?
Learn how you can recover it.
Password
Email/Username
Log in
SmartHome Security
Our customer support agents are available 24/7
at 1-855-255-8828.
For additional installation instructions, videos and
troubleshooting, please visit telus.com/IndoorCamera
or scan the QR code below.
Additional Support
Nice Work, You're All Done!

Flashing
Flashing
Off Power off
Factory reset
Power on, camera booting
Flashing
Flashing
WPS mode
Wi-Fi acess point mode
Flashing
Solid Connected to TELUS SmartHome
Solid No local or Internet connection
Local network connection
LED Reference Guide
NOTE
If you have issues connecting the camera to a TELUS
account, power cycle the camera (unplug the power cable
from the camera and plug it back in to restore power).
If issues persist, reset the camera to factory defaults.
IMPORTANT
If the camera was previously installed to a TELUS account,
it will need to be deleted before it can be installed again.
Troubleshooting (Factory Reset)
Flashing
Flashing
Flashing
WPS
RESET
15 seconds