
SmartHome1’s system
SmartAlert
SMARTHOME
XXXXXXXXXXXX
Customize Smart Video Alerts
16
NOTE
If you have issues connecting the camera to a TELUS account,
power cycle the camera (unplug the power cable from the
camera and plug it back in to restore power). If issues persist,
reset the camera to factory defaults.
IMPORTANT
If the camera was previously installed to a TELUS account,
it will need to be deleted before it can be installed again.
Our customer support agents are available 24/7 at
1-855-255-8828.
For additional installation instructions, videos and
troubleshooting, please visit telus.com/OutdoorCamera
or scan the QR code below.
Additional Support
Nice Work, You're All Done! LED Reference Guide
Flashing
Flashing
Off Power off
Factory reset
Power on, camera booting
Flashing
Flashing
WPS mode
Wi-Fi acess point mode
Flashing
Solid Connected to TELUS SmartHome
Solid No local or Internet connection
Local network connection
Troubleshooting (Factory Reset)
15 seconds
Flashing