ACTi Q92 User manual

Indoor Mini Dome
Hardware Manual
Q92, Q93, Q94
Ver. 2016/11/24

www.acti.com
Hardware Manual
2
Table of Contents
Precautions 4
Safety Instructions....................................................................................................6
Introduction 7
List of Models............................................................................................................7
Package Contents.....................................................................................................8
Physical Description.................................................................................................9
Mounting Options...................................................................................................10
Installation Procedures 11
Step 1: Prepare for Installation..............................................................................11
General Installation .............................................................................................12
Door Installation ..................................................................................................12
Escalator Installation...........................................................................................13
Step 2: Open the Dome Cover...............................................................................14
Step 3: Route the Cables .......................................................................................15
Step 4: Install the Camera......................................................................................16
Step 5: Connect to Network...................................................................................17
Step 6: Close the Dome Cover ..............................................................................17
Step 7: Access the Camera Live View ..................................................................18
Other Adjustments and Accessories 19
How to Install / Remove the Memory Card...........................................................19
How to Insert the Memory Card..........................................................................19
How to Remove the Memory Card......................................................................19
How to Connect the Power Adapter (Optional)....................................................20
Accessing the Camera 21
Configure the IP Addresses...................................................................................21

www.acti.com
Hardware Manual
3
Using DHCP Server to Assign IP Addresses ......................................................21
Using the Default Camera IP Address ................................................................23
Access the Camera.................................................................................................25
Initial People Counting Configuration ..................................................................27
How to Configure People Counting?...................................................................30
Where to Save the Counting Data? ....................................................................34
How to Create the Camera Identity?...................................................................34
Other People Counting Firmware Setup Tips .....................................................35
Using the Live People Counting Viewer 36

www.acti.com
Hardware Manual
4
Precautions
Read these instructions
Read all the safety and operating instructions before using this product.
Heed all warnings
Adhere to all the warnings on the product and in the instruction manual. Failure to follow the
safety instructions given may directly endanger people, cause damage to the system or to other
equipment.
Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
ACTi andACTi logo are registered trademarks of ACTi Corporation. All other names and products
used in this manual are registered trademarks of their respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local
office if you find any inaccuracies or omissions. ACTi will not be held responsible for any
typographical or technical errors and reserves the right to make changes to the product and
manuals without prior notice.

www.acti.com
Hardware Manual
5
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.

www.acti.com
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this product from the power supply before cleaning.
Accessories and Repair Parts
Use only the accessories and repair parts recommended by the manufacturer. Using other
attachments not recommended by the manufacturer may cause hazards.
Installation
Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a dry
place protected from weather,
Servicing
Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Damage Requiring service
Disconnect this product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the product.
3) If the inner parts of product have been directly exposed to rain or water.
4) If the product does not operate normally even by following the operating instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as improper
adjustment of other controls may result in damage, and will often require extensive work by a
qualified technician to restore the product to its normal operation.
Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine if the product is in proper operating condition.

www.acti.com
Hardware Manual
7
Introduction
List of Models
This hardware manual contains the following models:
Q92
2MP People Counting Indoor Mini Dome with D/N, Adaptive IR,
Extreme WDR, SLLS, Fixed lens
Q93
1MP People Counting Indoor Mini Dome with D/N, Adaptive IR,
Extreme WDR, SLLS, Fixed lens
Q94
1MP People Counting Indoor Mini Dome with D/N, Adaptive IR,
Extreme WDR, SLLS, Fixed lens
From the installation perspective, the above models are very similar; therefore one manual is
used for all of them.

www.acti.com
Hardware Manual
8
Package Contents
Check if the camera package comes with the following items:
Camera
Drill Template
Screw Kit
Quick Installation Guide
Warranty Card
Converter Cable
IMPORTANT: When the camera is taken out from the box, the lens cover is covered by a thin film.
DO NOT remove this film. It is used to protect the lens cover from scratches or fingerprint marks
which may happen during installation. Remove this film only after the camera is securely installed
and all connections are complete.
Drill Template

www.acti.com
Hardware Manual
9
Physical Description
Item
Description
1
Memory Card Slot
Insert a memory card (not included) into the slot for local
recording purposes. See How to Install / Remove the Memory
Card on page 19 for more information.
NOTE: Supports microSDHC and microSDXC cards
2
IR LEDs
Provide IR illumination.
3
Reset Button
Restores the factory default settings of the camera. To reset the
camera, while the power is on, press and hold the Reset Button
for at least 5 seconds or until the Power LED lights up.
4
System LEDs
Indicates the camera status:
Activity (Amber) LED: Blinks when network activity is in
progress.
Power (Red) LED: Lights up when the camera is powered
up and goes off again after the boot up process is complete.
Link (Green) LED: Lights up when the camera is
connected to a network.
5
Ethernet Port
(RJ-45)
Connects to a network using an Ethernet cable with RJ-45
connector.
6
DC 12V Power
Input
Connects to a DC 12V power when a Power-over-Ethernet (PoE)
switch or injector is not available. See How to Connect the
Power Adapter (Optional) on page 20 for more information.

www.acti.com
Hardware Manual
10
Mounting Options
The camera is a People Counting Camera, wherein only mounting on ceiling or pendant mount
are the recommended installation methods. Select the most suitable solution for your installation
environment.
Mount Types
Accessories
Surface Mount
Suitable when mounting the camera directly on ceilings without
additional mounting accessories. See Installation Procedures on page
11 for more information.
Gangbox
Suitable when mounting the camera on a 4” Round or 4” Octagon
Gangbox inside the ceiling. The use of gangbox is lawfully required in
some areas in the United States. A Gangbox Converter (purchased
separately) is required for this type of installation.
Pendant Mount
Suitable when installing the camera on high ceilings where a straight
tube is used to lower the camera. The Pendant Mount with Mount Kit
(optional accessory set) is required for this type of installation.
NOTE:
For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).
The above mounting accessories are not included in the package. Contact your sales
agents to purchase.