Telycam 4K UHD All-in-One Video Camera User manual

4K UHD All-in-One Video Camera
(V2.0)
J.BC.0205.0150

4K UHD All-in One Video Camera
PACKING LIST
Check all bellow items when open the package:
Camera······················································································1
Power Adapter············································································· 1
Power Cable················································································1
Type-C Cable·············································································· 1
Remote Controller·········································································1
User Manual··············································································· 1
QC certification············································································1
QUICK START
1. Check all cable connections before power on.
2. Dial Switch Setting (on the back of the camera):
Back dial code
Mode
SW-1
SW-2
Instruction
1
OFF
*
Updating
mode
2
ON
*
Working
mode
SW-2 is reserved, no function defined

4K UHD All-in One Video Camera
PRODUCT ADVANTAGES:
Adopt advanced DSP, Sony 1/2.8 inch 8.42 megapixel sensor and high
quality 12 megapixel lens, to output Ultra high definition, crystal clear
image.
USB2.0 YUY2/NV12/MJPG/H.264/H.265 video format, works with
Windows, MAC OS, Android, Linux OS.
Type-C port output.
120degree field of viewing.
Lens distortion rate less than 4% (120°FOV).
Support WDR, 3DNR, Anti-flicker feature.
Standard UVC 1.1 protocol, compatible with your favorite video
conferencing software and platform.
The low noise CMOS effectively enables the ultra-high signal-to-noise
ratio of the camera video, and keeps clear and sharp image even under
the condition of ultra-low illumination.
Support Auto frame: Auto frame participants at meeting start or enter,
leave, or change positions; Auto frame can be closed via remote
controller.
Uses Microphone Array Algorithms
By sampling and processing the spatial characteristics of sound field, the
background sound can be removed to the maximum extent, leaving only
the needed sound waves, even in the noisy environment, it can make the
voice sound clear without noise.
High Definition Audio
16K pickup and 24K playback, to make voice crystal clear, sounding
like face-to-face meeting.
360° Omni-directional pickup, the pickup range is up to 5 meters and
voice quality is most ideal in 3 meters.
Outstanding Full Duplex Communication
Freely and fluent two-ways communication in 5 meters.

4K UHD All-in One Video Camera
Advanced Speech Algorithms
360° Omni-directional and long distance pick
Full duplex communication
384ms acoustic echo cancellation
Background noise suppression
Auto-level loud and soft voices
Peak-limiting algorithm eliminates even momentary speaker clipping to
prevent distortion
PRODUCT SPEC
Model
4K UHD All-in-One Video Camera
Sensor
1/2.8 inch high quality, 8.42 megapixel SONY CMOS
sensor
Video
Format
Type-C
(USB2.0)
YUY2, NV12:
1280*720@15;
1024*576@20;
640*480@30
MJPG:
3840*2160@30; 2560*1440@30;
1920*1080@30; 1280*720@30;
1024*576@30; 640*480@30
H.264, H.265:
3840*2160@20; 2560*1440@30;
1920*1080@30; 1280*720@30;
1024*576@30; 640*480@30
Digital Zoom
4X
Field of Viewing
120°
Sensor Resolution
8.42 megapixel
Control Port
USB2.0(UVC/UAC)

4K UHD All-in One Video Camera
Video Port
Type-C(USB2.0)
S/N Ratio
>50dB
Focal Length
f＝2.20mm
Minimum Lux.
0.1 lux
White Balance
Auto/Manual
Iris
F 2.2
Anti-Flicker
50HZ/60HZ/OFF
WDR
Supported
Edge Enhancement
Supported
Digital Noise Reduction
2D&3D
Image Flip
Supported
Electronic Pan/Tilt
Supported
Auto frame
Supported
Backlight Compensation
Supported
Voice Pick Distance
3~5meters
USB Audio
Supported
Microphone
Omnidirectional microphone(100~16KHz)
Sensitivity
-26±2dB RL=2.2KΩ Vs=2.0V
Input Voltage
DC+12V
Speaker
4Ω/8W 100-24KHz 2inch Anti-magnetic speaker
RJ45
POE(IEEE802.3af)
Dimension(L × W × H)
395mm×113mm×112mm
Net Weight
1kg (2.2LB)

4K UHD All-in One Video Camera
CAMERA INTERFACE:
1. Speaker
7. Type-C (USB2.0) interface
2. Camera lens
8. Dial switch
3. Status indicator light
9. Adjustable spindle
4. Multi array microphone
10. Rotatable bracket
5. DC12V power interface
11. Safety cord interface
6. RJ45 interface (POE)
CAMERA DIMENSION(mm):

4K UHD All-in One Video Camera
INSTALLATION MODES:

4K UHD All-in One Video Camera
INSTRUCTIONS FOR WIRELESS REMOTE CONTROL:
LED function indication:
Press any button to show red color: it means that the present selection
is to control camera 1;
Press any button to show green color: it means that the present
selection is to control camera 2;
Press any button to show blue color: it means that the present
selection is to control camera 3.
CAM1/CAM 2/CAM3:
Press the key shortly to select the camera to be controlled, press the
key for 3s to set the camera address.
Zoom adjustment key: +/-
Adjust the electronic zoom, only available when Auto frame is closed.
Power key:
Standby / start camera.
BLC:
Set backlight compensation ON or OFF.
Navigation key: up, down, left and right
In normal working mode, it is used to adjust the position of electronic pan tilt or select menu items
after entering the menu.
Confirm / Home key:
In the normal working mode, shortly press to return the electronic pan tilt to home position. Or after
entering the menu, it is used to confirm the menu options.
Menu key:
In normal working mode, press to enter the menu, and then press to exit the menu.
Volume control key:
Control the volume or mute.
Video Mute/Micro Mute:
Video Mute and microphone mute.

4K UHD All-in One Video Camera
A/M:
Auto frame/Manual frame.
PUSH Frame:
In Auto frame off mode, you can manually trigger the Auto frame once.
Preset key:
Long press for 3 seconds to save the current position to the corresponding preset position, shortly
press to call the preset position, only available when Auto frame is closed.
Mirror /Flip:
Reset:
Press and hold for 3S to reset the camera parameters to the factory settings.
Digital key reuse:
As shown in the figure on the right, in non-menu mode, this part of the key is used for the function
identified on the key; in menu mode, this part of the key is used as a numeric key.
OSD menu
1. In normal working mode, press the menu button on the IR remote, to enter the
OSD menu; press the menu button again to exit and save modified parameters.
2. Use the navigate button to select the main menu. As above picture, once been
selected, the main menu will change to grey color background, and the right side will
show all parameters under this sub menu.
3. When enter into the main OSD menu, press the up/down navigate button to select
the sub menu, use left/right navigate button to set the parameter.
4. If you need to return back the last level menu, select the “return” and then press the
left or right navigate button to get back to previous menu.
5. Press OSD button again to exit the menu.

4K UHD All-in One Video Camera
6. OSD Menu Layout:
SYSTEM
LANGUA
GE
ENGLISH/CHINESE
PROTOCO
L
Optional item:VISCA
Default: VISCA
ADDRESS
VISCA:1~7
Default: 1
BAUDRAT
E
2400,4800,9600,115200 optional
Default: 9600
RETURN
Back to the main menu
EXPOSURE
EXP.MODE
MODE
AUTO/MANU
Default: AUTO
SHUTTER
Shutter speed:1/30~1/10000, only valid
under MANU mode
Default: 1/100
GAIN
Gain setting:0~15, only valid under MANU
mode
Default: 0
FLICK
OFF/50HZ/60HZ
Default: 50HZ
BACKLIGH
T
ON/OFF
Default: OFF
GAMMA
0~15
Default: 8
RETURN
Back to the main menu
IMAGE
WB MODE
AUTO/MANU
Default: AUTO
B_GAIN
Blue gain level:0~256, only valid under
manual white balance mode
Default: 100
R_GAIN
Red gain level:0~256, only valid under
manual white balance mode
Default: 100
DEFOG
Set the image permeability:OFF/1~15
Default: OFF
RETURN
Back to the main menu
QUALITY
2D NR
Set 2D noise reduction level:ON/OFF
Default: OFF
3D NR
Set 3D noise reduction level:OFF/AUTO/1~4
Default: AUTO
SHARPNES
S
Sharpness setting:0~15
the higher value, the clearer of image shape
Default: 8
CONTRAST
Contrast setting:0~15
Default: 8
SATURATI
ON
Saturation setting:0~15
Default: 8
BRIGHT
Bright setting:0~15
Default: 8
RETURN
Back to the main menu
CTRL
MIRROR
Turn the screen left and right ON/OFF
Default: OFF
FLIP
Picture up and down ON/OFF
Default: OFF
AUTO FRAME
AUTO/MANU
Default: AUTO
RETURN
Back to the main menu
RESET
CAM RESET
Reset camera parameter to default
RETURN
Back to the main menu
INFO
CTRL VER
Camera movement control program version
CTRL DATE
Release date of camera movement control program
RETURN
Back to the main menu