Teton Grill Natural Reliability XFB User manual

Teton Dynamics
P.O. Box 3031
San Leandro, CA 94578-0031
XFB Fountain Basin
INSTRUCTION MANUAL
MODEL
DATE
June 2022 v1.0
XFB36S

XFB Fountain Basin
XFB36S
VERSION June 2022
www.tetonus.com
800.752.0399
[e-mail]
WELCOME TO THE WORLD OF TETON,
NATURAL RELIABILITY™!
You Made The Right Choice Investing In This Quality
Product. Thank You And Enjoy.
BEFORE USING THIS PRODUCT, PLEASE READ
THESE INSTRUCTIONS CAREFULLY AND
FAMILIARIZE YOURSELF WITH THE UNIT. PLEASE
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE.
Teton Page 2
Simple Installation Process:
1. Fountain Basin can be installed above ground or in ground:
· For In-ground Installation: (a) Dig a 9” deep hole 32” x 32” and compact the soil at the
base of the hole to support the weight of you fountain. (b) Use a 1-2” thick layer of sand
to level the base of the hole. (c) Add the Basin to the hole and backfill around it with sand
or soft soil to hold it securely in place.
· For above ground Installation: (a) Find a level, solid surface to place the Basin. (b) Use
bricks to support the outer rim. (c) Build a decorative shroud around the basin with
bricks or wall blocks.
2. Attach the tubing and fittings to the pump per the pump manufacturers instructions.
3. Extend the tubing and the pump power cord through the Basin lid and place the lid on top
of the Basin.
4. Attach the tubing to your pottery or rock feature and place it on the lid using wedges to
level it.
5. Fill the Basin with water and start your pump. Use the flow adjuster or valve to control the
water coming from your water feature to avoid over splash.
6. Install the pump access door into the lid and add decorative stones to conceal the lid.
7. Enjoy with your friends and family!
Note: Product does not include pottery, plumbing, lighting, or decorative stone.