Alpine WCT202 User manual

Owner’s Manual
Quesons?
Please See Contact Details on the Back!
Tiered Column Tabletop
Fountain with Tealight Candle
Holders
v17.0
USA Item No: WCT202
UK Item No.: WCT202-UK

1
CONTENTS
Contents ...................................................................... 1
What’s Included ........................................................... 2
Features ...................................................................... 3
Specications .............................................................. 3
Assembling & Using Your Product............................... 4
Replacement Parts...................................................... 8
Also Available From Alpine .......................................... 8
Troubleshooting........................................................... 9
Caution ...................................................................... 10
Limited Warranty Information .....................................11
Notes ......................................................................... 12

2
Submersible Pump
x1
WHAT’S INCLUDED
*Pump may be packaged separately in an outer box located in the
outer Styrofoam packaging.
Fountain
x1
Bag of Rocks
x1
Fountain Base
x1
Tealight Candles
(Includes 3
Replacements Candles)
x6

FEATURES
3
FEATURES
Soothing, Meditative,
and Relaxing Water
Sound
Tealight Candles
and Rocks
Durable
Polystone
Construction
SPECIFICATIONS
Country Power
Requirement
Water
Capacity
Tubing Inner
Diameter
USA 120 V, 60 Hz 0.3 gal 0.31"
UK 230V, 50 Hz 1 L 7.87 mm

4
ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully. Check the packaging to ensure all of
the parts have been removed.
*Some splashing may occur when the fountain is in use.
1. Place the Fountain Base on a smooth and level surface.
2. Remove the Submersible Pump from its packaging. Move the
switch on the pump to the right to adjust the water ow to lowest
setting to avoid splashing during assembly. You can adjust the
water ow at any time.
Alpine Quick Tip #1
Move switch to the Left
to turn up the water
ow or to the Right turn
down the water ow.

5
ASSEMBLING & USING YOUR PRODUCT
3. Locate the vinyl tubing under the Fountain and connect it to the
tube connector on the Pump.
4. Pour 32 oz. of water into the Fountain Base. Do not overow as
this may cause splashing. Make sure the pump is completely
submerged and the water runs clear during operation.
NOTE: We recommend using distilled water to prevent scale build-
up. It can take up to 5 minutes for the air to be completely expelled
and water begins to ow the rst time you operate the pump.
Alpine Quick Tip #2
The black tube connector
may be attached to the vinyl
tubing or the pump depending
on the product. It is shown
attached to the pump here.

6
ASSEMBLING & USING YOUR PRODUCT
5. Insert the Fountain onto the Fountain Base with the Pump
attached. Allow the attached cord of the Pump to t in the gap
exiting the Fountain Base.
NOTE: Do not put the plug end of the cord into the water!
6. Place three (3) tea-light candles in the candle holders. Place the
rocks along the base of the Fountain as desired.

7
ASSEMBLING & USING YOUR PRODUCT
7. Plug the Pump cord into your local power supply.
8. You can now adjust the Pump to your ow preference. (See
Quick Tip 1) Once set, replace the Fountain Top.
9. Congratulations, your fountain is now complete. Don’t forget to
add water regularly as water will evaporate over time.

8
REPLACEMENT PARTS
ALSO AVAILABLE FROM ALPINE
Country
Tabletop
Fountain Care
Formula
Americana®
UV Acrylic
Sealer
Touch-Up
Paint Kit
USA PPL102 RRR106 RTD102
UK N/A N/A N/A
For parts or additional help with your new product, please contact
Alpine customer service.