Texsport 14262 User manual

PART LI T:
A......2 curved end poles
B......2 straight poles
C......2 angled poles
D......2 “ ” hooks
Assembly of the stand is generally
easier with two people or with
something to lean the stand against
for temporary support.
Remove all parts from the shipping carton and
examine carefully for any signs of
damage or missing parts. Read this
instruction sheet in its entirety prior to
assembly or use.
A
Fig. 1
D
B
C
TEP 1 - Place the parts on the ground in the manner indicated above. Be certain the stand is assem-
bled and used on solid, level ground.
MAKE CERTAIN THAT EACH CONNECTION I ECURELY AND COMPLETELY IN ERTED INTO THE ADJOINING PART
AFTER A EMBLY. IN PECT PRIOR TO EVERY U E OF YOUR HAMMOCK TAND, E PECIALLY AFTER REMOVING
OR IN TALLING YOUR HAMMOCK.
INSTRUCTIONS
Item 14262
Steel Hammock Stand
Thank you for purchasing this Texsport hammock stand. Please read and understand each step of the set-up instructions. We hope
you enjoy your new hammock stand and that it will give you many years of outdoor pleasure.
B
B
C
C
A
A
Fig. 2

TEP 5 - This is how your stand should look.
TEP 2 - First, connect part B to part C and set aside. Then connect part A to remaining part C.
Lastly, connect part A to part B.
TEP 3 - Connect remaining part B to Part C. Then connect remaining part A to parts B and C.
TEP 4 - Insert hooks (D) into holes located at the top of part A.
MAINTENANCE
1. For best results and longer life, store your stand out of the weather to reduce possible rust problems.
2. BEFORE EACH USE, INSPECT ALL MOUNTING HARDWARE, STAND PARTS, POINTS OF CONNECTION AND YOUR
HAMMOCK FOR INDICATIONS OF TEAR OR DEFECTS, REPLACE ALL WORN PARTS PRIOR TO USE OF YOUR
STAND OR HAMMOCK.
3. Should the painted surface become scratched or chipped, obtain a matching paint and touch up spots where the under-
lying metal is exposed to inhibit rust.
CAUTION AND WARNING
DO NOT allow the connections (where one part inserts into another part) to become loose or less than totally inserted. In-
spect prior to every use, to make certain that one part is fully inserted into the other part.
DO NOT EXCEED THE UGGE TED WEIGHT LIMIT FOR YOUR HAMMOCK TAND
QUE TION :
If you should have any questions, problems or comments, please call our Customer Service Department at
1-800-231-1 02 or e-mail [email protected]. This Department is open M–F from 8 a.m.–5 p.m. CST.
MODEL: TEEL HAMMOCK TAND
ITEM 14262
MADE IN CHINA
(BR42)10