Thermador KBUIT4250E User manual

USE & CARE GUIDE
For Built-in Refrigerators
MANUAL DE USO Y
CUIDADO
Para los refrigeradores
empotrados
GUIDE
D" UTILISATION ET
D'ENTRETIEN
Pour r6frig6rateurs encastr6s
Side by Side Model/
Modelo de dos puertas/
Modele c6te & c6te
KBUIT4250E
KBUIT4260E
KBUIT4270E
KBUIT4850E
KBUIT4860E
KBUIT4870E
KBUDT4250E
KBUDT4260E
KBUDT4270E
KBUDT4850E
KBUDT4860E
KBUDT4870E
For questions about features, operation/performance,
parts accessories or service, call: 1-800-735-4328
In Canada, call for assistance, installation, or service,
call: 1-800-735-4328 or visit our website at...
www.thermador.com
Para consultas respecto a caracteristicas, operaci6n/
desempeSo, partes, accesorios o servicio, Ilame al:
1-800-735-4328
En Canada, para obtener asistencia, instalaci6n o
servicio Ilame al: 1-800-735-4328 o visite nuestra
p&gina de Internet ... www,thermador, com
Au Canada, pour assistance, installation ou service,
composez le 1-800-735-4328 ou visitez notre site web
www.thermador.com
Thermador °
W10303990A

TABLEOF CONTENTS
REFRIGERATOR SAFETY ........................................................................... 3
Proper Disposal of Your Old Refrigerator ................................................. 3
BEFORE USE ............................................................................................... 4
REFRIGERATOR USE ................................................................................. 4
Power On/Off Switch ................................................................................ 4
Water Supply Requirements ..................................................................... 5
Normal Sounds ......................................................................................... 5
Ensuring Proper Air Circulation ................................................................ 5
Using the Controls .................................................................................... 6
Water and Ice Dispensers ......................................................................... 7
Water Filter Status .................................................................................... 8
Water Filtration System ........................................................................... 8
Ice Maker and Storage Bin ....................................................................... 9
REFRIGERATOR FEATURES ................................................................... 10
Refrigerator Shelves ............................................................................... 10
Dell Pan ................................................................................................... 10
Dell Pan Temperature Control ................................................................ 10
Crisper Drawers and Covers .................................................................. 11
Covered Utility Bin .................................................................................. 11
Wine Rack ............................................................................................... 11
FREEZER FEATURES ............................................................................... 11
Freezer Shelf ........................................................................................... 11
Freezer Basket ........................................................................................ 12
DOOR FEATURES ..................................................................................... 12
Utility Compartment ................................................................................ 12
Door Bins ................................................................................................ 12
REFRIGERATOR CARE ............................................................................ 12
Cleaning .................................................................................................. 12
Changing the Light Bulbs ....................................................................... 13
Power Interruptions ................................................................................ 13
Vacation and Moving Care ..................................................................... 14
TROUBLESHOOTING ............................................................................... 14
ASSISTANCE OR SERVICE ...................................................................... 18
In the U.S.A ............................................................................................. 18
In Canada ................................................................................................ 18
Accessories ............................................................................................. 18
WATER FILTER CERTIFICATIONS .......................................................... 18
PERFORMANCE DATA SHEETS ............................................................. 19
WARRANTY ............................................................................................... 20
[NDICE
SEGURIDAD DEL REFRIGERADOR ........................................................ 21
C6mo deshacerse adecuadamente de su refrigerador viejo ................. 21
ANTES DE USAR ....................................................................................... 22
USO DE SU REFRIGERADOR .................................................................. 22
Interruptor de Encendido/Apagado ........................................................ 22
Requisitos del suministro de agua ......................................................... 23
Sonidos normales ................................................................................... 23
C6mo asegurar la debida circulaci6n del aire ........................................ 24
Uso de los controles ............................................................................... 24
Despachadores de agua y hielo ............................................................. 25
Estado del filtro de agua ......................................................................... 26
Sistema de filtraci6n de agua ................................................................. 27
F&brica de hielo y dep6sito .................................................................... 27
CARACTERJSTICAS DEL REFRIGERADOR ........................................... 28
Estantes del refrigerador ........................................................................ 28
Compartimiento para carnes frias .......................................................... 29
Control de temperatura del compartimiento para carnes frias .............. 29
Cajones para verduras y tapas ............................................................... 30
Compartimiento de uso general con tapa .............................................. 30
Portabotellas ........................................................................................... 30
CARACTERJSTICAS DEL CONGELADOR .............................................. 30
Estante del congelador ........................................................................... 30
Canastilla del congelador ....................................................................... 31
CARACTERJSTICAS DE LA PUERTA ...................................................... 31
Compartimiento utilitario ........................................................................ 31
Recipientes de la puerta ......................................................................... 31
CUIDADO DE SU REFRIGERADOR ........................................................ 31
Limpieza .................................................................................................. 31
C6mo cambiar los focos ........................................................................ 32
Cortes de corriente ................................................................................. 33
Cuidado durante las vacaciones y mudanzas ....................................... 33
SOLUClON DE PROBLEMAS ................................................................... 34
AYUDA O SERVIClO TleCNICO ................................................................ 37
En los EE.UU ........................................................................................... 37
En Canad& .............................................................................................. 37
Accesorios .............................................................................................. 37
HOJA DE DATOS DEL RENDIMIENTO ................................................... 38
GARANTJA ................................................................................................. 39
TABLEDESMATIERES
SI_CURITI_ DU RI_FRIGI_RATEUR ........................................................... 40
Mise au rebut de votre vieux refrig_rateur ............................................. 40
AVANT L UTILISATION ............................................................................. 41
UTILISATION DU RleFRIGleRATEUR ....................................................... 41
Commutateur marche/arr6t .................................................................... 41
Specifications de I'alimentation en eau .................................................. 42
Sons normaux ......................................................................................... 42
Pour s'assurer d'une circulation d'air appropriee .................................. 43
Utilisation des commandes .................................................................... 43
Distributeurs d'eau et de glagons ........................................................... 44
Temoin lumineux d'_tat du filtre &eau ................................................... 45
Syst_me de filtration d'eau ..................................................................... 46
Machine &glagons et bac d'entreposage .............................................. 46
CARACTleRISTIQUES DU RleFRIGleRATEUR ........................................ 47
Tablettes du refrig6rateur ....................................................................... 47
Tiroir de specialites alimentaires ............................................................ 48
Commande de temp@ature du tiroir de specialit6s alimentaires .......... 48
Bacs &legumes et couvercles ................................................................ 49
Casier utilitaire couvert ........................................................................... 49
Casier & vin ............................................................................................. 49
CARACTleRISTIQUES DU CONGleLATEUR ........................................... 49
Tablette de cong61ateur .......................................................................... 49
Panier du congelateur ............................................................................ 50
CARACTleRISTIQUES DE LA PORTE ...................................................... 50
Compartiment utilitaire ........................................................................... 50
Compartiments dans la porte ................................................................. 50
ENTRETIEN DU RleFRIGleRATEUR ......................................................... 50
Nettoyage ............................................................................................... 50
Remplacement des ampoules d'eclairage ............................................. 51
Pannes de courant .................................................................................. 52
Entretien avant les vacances ou Iors d'un demenagement ................... 52
DlePANNAGE ............................................................................................. 53
ASSISTANCE OU SERVICE ...................................................................... 57
Accessoires ............................................................................................. 57
FEUlLLES DE DONNleES SUR LA PERFORMANCE ............................. 58
GARANTIE .................................................................................................. 59
2

REFRIGERATORSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Disconnect power before servicing.
• Replace all parts and panels before operating.
• Remove doors from your old refrigerator.
• Use nonflammable cleaner.
• Keep flammable materials and vapors, such as gasoline,
away from refrigerator.
• Use two or more people to move and install refrigerator.
• Disconnect power before installing ice maker (on ice maker
kit ready models only).
• Use a sturdy glass when dispensing ice (on some models).
• Do not hit the refrigerator glass doors (on some models).
SAVE THESE INSTRUCTIONS
Proper DisposalofYour Old Refrigerator
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
Before You Throw Away Your Old Refrigerator or Freezer:
• Takeoff the doors.
• Leave the shelves in place so that children may not easily
climb inside.
IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous
- even if they will sit for "just a few days." Ifyou are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.

BEFOREUSE
Remove the Packaging
Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see "Refrigerator Safety."
• Dispose of/recycle all packaging materials.
Clean Before Using
After you remove all of the packaging materials, clean the inside of
your refrigerator before using it. See the cleaning instructions in
"Refrigerator Care."
important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
REFRIGERATORUSE
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
If you need to turn the power to your refrigerator On or Off, you
must remove the top grille to gain access to the On/Off switch.
Turn the power to the refrigerator Off when cleaning your
refrigerator or changing light bulbs.
Remove and Replace Top Grille
Remove Top Grille:
1. Grasp both ends of the top grille.
2. Push the top grille straight up, then pull straight out. Lay the
top grille on a soft surface.
A B
A. Top grille
B. Cabinet side trims
Replace Top Grille:
1. Insert top grille hooks (located on the back of the top grille)
into the slots on the side trim.
2. Pull grille down slightly to lock into place.

Turn Power On or Off:
1. Remove top grille.
2. Press main power switch to the On or Off position.
3. Replace top grille.
IMPORTANT: Be sure the power switch is set to the On position
after cleaning refrigerator or changing light bulbs.
/
/[]I
A. Power On/Off switch
Read all directions before you begin.
IM PORTANT:
When your refrigerator was installed, the water connection
from the water source should have been connected to your
refrigerator. If your refrigerator is not connected to a water
source, see "Connect to Water Line" in the Installation
Instructions. Ifyou have any questions about your water
connection, see "Troubleshooting" or call a licensed, qualified
plumber.
If you turn the refrigerator on before the water line is
connected, turn the ice maker OFF. See "Ice Maker and
Storage Bin."
• All installations must meet local plumbing code requirements.
Water Pressure
A cold water supply with water pressure between 30 and 120 psi
(207 and 827 kPa) is required to operate the water dispenser and
ice maker. If you have questions about your water pressure, see
"Troubleshooting" or call a licensed, qualified plumber.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of a
reverse osmosis system going to the water inlet valve of the
refrigerator needs to be between 30 and 120 psi (207 and
827 kPa).
If a reverse osmosis water filtration system is connected to your
cold water supply, the water pressure to the reverse osmosis
system needs to be a minimum of 40 psi (276 kPa).
If the water pressure to the reverse osmosis system is less than
40 psi (276 kPa):
• Check to see whether the sediment filter in the reverse
osmosis system is blocked. Replace the filter if necessary.
• Allow the storage tank on the reverse osmosis system to refill
after heavy usage.
If your refrigerator has a water filter, it may further reduce the
water pressure when used in conjunction with a reverse
osmosis system. Remove the water filter. See "Water Filtration
System."
If you have questions about your water pressure, call a licensed,
qualified plumber.
Your new refrigerator may make sounds that your old one didn't
make. Because the sounds are new to you, you might be
concerned about them. Most of the new sounds are normal. Hard
surfaces, such as the floor, walls, and cabinets, can make the
sounds seem louder. The following describes the kinds of sounds
and what may be making them.
• If your refrigerator is equipped with an ice maker, you will hear
a buzzing sound when the water valve opens to fill the ice
maker for each cycle.
Your refrigerator is designed to run more efficiently to keep
your food items at the desired temperatures and to minimize
energy usage. The high efficiency compressor and fans may
cause your refrigerator to run longer than your old one. You
may also hear a pulsating or high-pitched sound from the
compressor or fans adjusting to optimize performance.
You may hear the evaporator fan motor circulating air through
the refrigerator and freezer compartments. The fan speed may
increase as you open the doors or add warm food.
Rattling noises may come from the flow of refrigerant, the
water line, or items stored on top of the refrigerator.
Water dripping on the defrost heater during a defrost cycle
may cause a sizzling sound.
As each cycle ends, you may hear a gurgling sound due to the
refrigerant flowing in your refrigerator.
Contraction and expansion of the inside walls may cause a
popping noise.
You may hear air being forced over the condenser by the
condenser fan.
You may hear water running into the drain pan during the
defrost cycle.
In order to ensure proper temperatures, you need to permit airflow
between the two sections. Cold air enters the bottom of the
freezer section and moves up. Itthen enters the refrigerator
section through the top vent. Air then returns to the freezer as
shown.
iiiiiii i iii
,£1}SSSHHHHHHHHHH) KS
b •
/
Do not block any of these vents with food such as soda, cereal,
bread, etc. Do not block any airflow vents. If the vents are
blocked, airflow will be obstructed and temperature and moisture
problems may occur.
IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly.

IMPORTANT: CONDITION/REASON:
• The refrigerator control adjusts the refrigerator compartment
temperature. The freezer control adjusts the freezer
compartment temperature.
• Wait 24 hours after you turn on the refrigerator before you put
food into it. If you add food before the refrigerator has cooled
completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer controls to a
lower (colder) setting will not cool the compartments any
faster.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
The actual temperature may differ from the display when a
door is open for an extended period of time.
NOTE: The factory recommended set points are 0°F (-18°C)
for the freezer and 37°F (3°C) for the refrigerator.
Turning Refrigerator On and Viewing Set Points
• Press and hold POWER (ON/OFF) for 2 seconds.
Warmer
Colder
FREEZER REFRIGERATOR Warmer
G
Q
Colder
Viewing the Celsius Temperatures
Press °C SELECT touch pad. The negative sign (-)will light up.
To redisplay degrees Fahrenheit, press °C SELECT again.
0
NOTE: If the freezer temperature is below zero, the negative sign
next to the freezer display will light up. This is normal.
Adjusting Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
To adjust set point temperatures:
• Press the refrigerator or freezer PLUS (+) or MINUS (-) keypad
until the desired temperature is reached.
Warmer
REFRIGERATOR Q
Q
Colder
NOTE: The set point range for the freezer is -5°F to 6°F (-21 °C to -
14°C). The set point range for the refrigerator is 34°F to 46°F (1°C
to 8°C).
CONDITION/REASON: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Control
Not set correctly for conditions 1° higher
REFRIGERATOR too warm REFRIGERATOR Control
High use or room very warm 1° lower
TEMPERATURE
ADJUSTMENT:
FREEZER too cold FREEZER Control
Not set correctly for conditions 1° higher
FREEZER too warm/too little ice FREEZER Control
High use or heavy ice use 1° lower
Water Filter Status and Reset
Do not use with water that is microbiologically unsafe or
dunknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected waters that may contain
filterable cysts.
The water filter display will help you know when it is time to
change your filter. To change the filter, see the "Water Filtration
System" section.
INDICATOR: STATUS:
99 percent New filter installed
10 percent Order replacement filter
0 percent or flow decreases Replace filter
• After replacing the water filter, press RESET and hold for
2 seconds to change the water filter display to 99 percent.
WATER FILTER
PERCENTLEFT
Holiday Feature
The Holiday feature is designed for the traveler or for those whose
religious observances require turning off the lights and ice maker.
By selecting this feature, the temperature set points remain
unchanged, the ice maker will be disabled and the interior lights
will turn off. For most efficient refrigerator operation, it is
recommended to exit the Holiday feature when it is no longer
required.
• Press HOLIDAY to turn on the Holiday feature. This feature will
remain on until the Holiday key is pressed again.
HOLIDAY
NOTE: If the Max Cool feature has been selected prior to
turning on the Holiday feature, then the set points will remain
at 34°F (1°C) and -5°F (-21 °C) for the refrigerator and freezer
compartments, respectively, until the Max Cool feature times
out. The refrigerator will then return to the previous
temperature set points chosen prior to the selection of the
Max Cool feature, but the lights and ice maker will remain off
until the Holiday key is pressed again.
6

'_®_O_YSG_C@ D S©@_:_ _S(on some modes}
You may have one or more of the following options: the ability to To Dispense Ice:
select either crushed or cubed ice, a light that turns on when you 1. Press button for the desired type of ice.
use the dispenser, or a lock option to avoid unintentional
dispensing. ICE
IM PORTANT:
After connecting the refrigerator to awater source or replacing
the water filter, flush the water system. Use a sturdy container
to depress and hold the water dispenser lever for 5 seconds,
then release it for 5 seconds. Repeat until water begins to
flow. Once water begins to flow, continue depressing and
releasing the dispenser lever (5 seconds on, 5 seconds off)
until a total of 3 gal. (12 L) has been dispensed. This will flush
air from the filter and water dispensing system, and prepare
the water filter for use. Additional flushing may be required in
some households. As air is cleared from the system, water
may spurt out of the dispenser.
The dispensing system will not operate when the freezer door
is open.
Allow 24 hours for the refrigerator to cool down and chill
water.
Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.
Water Dispenser
IMPORTANT: Depending on your model, the small removable tray
at the bottom of the dispenser is designed to catch small spills
and allow for easy cleaning. There is no drain in the tray. The tray
can be removed from the dispenser and carried to the sink to be
emptied or cleaned.
I I
CUBES CRUSHED
• For cubed ice, press the CUBES button.
• For crushed ice, press the CRUSHED button.
NOTE: For crushed ice, cubes are crushed before being
dispensed. This may cause a slight delay when dispensing
crushed ice. Noise from the ice crusher is normal, and pieces
of ice may vary in size. When changing from Crushed to
Cubes, a few ounces of crushed ice will be dispensed along
with the first cubes.
Cut Hazard
Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.
To Dispense Water:
1. Press a sturdy glass against the water dispenser lever.
2. Press a sturdy glass against the ice dispenser lever. Hold the
glass close to the dispenser opening so ice does not fall
outside of the glass.
2. Remove the glass to stop dispensing.
NOTE: Water may have an off-flavor if you do not use the
dispenser periodically. Dispense enough water every week to
maintain a fresh supply.
Ice Dispenser
Ice dispenses from the ice maker storage bin in the freezer. When
the dispenser lever is pressed:
• A trap door opens in a chute between the dispenser and the
ice bin. Ice moves from the bin and falls through the chute.
• When you release the dispenser lever, the trap door closes
and the ice dispensing stops.
3.
IMPORTANT: You do not need to apply a lot of pressure to the
lever in order to activate the ice dispenser. Pressing hard will
not make the ice dispense faster or in greater quantities.
Remove the glass to stop dispensing.
NOTE: The first few batches of ice may have an off-flavor from
new plumbing and parts. Throw the ice away. Also, take large
amounts of ice from the ice bin, not through the dispenser.
Dispenser Light (on some models)
The dispenser area has a light. When you use the dispenser, the
lever will automatically turn the light on. It can be turned on or off
manually by pressing the ON or OFF button.
LIGHT
ON OFF
NOTE: See the "Changing the Light Bulbs" section for information
on changing the dispenser light bulb.

2.
Dispenser Lock (on some models)
The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the product, to
the ice maker, or to the dispenser light. It simply deactivates the
ice and water dispensers. To turn off the ice maker, see "Ice
Maker and Storage Bin."
To Lock and Unlock the Dispenser:
1. Press the LOCK button. The ice and water dispensers will not
work.
2. Press the UNLOCK button. Then, continue to dispense ice or
water as usual.
LOCK OUT
Remove the cap by sliding it off the end of the used filter. The
cap will slide to the left or right.
IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
3. Take the new water filter out of its packaging and remove and
discard the cover from the O-rings.
UNLOCK LOCK
The water filter status display will help you know when to change
the water filter. The display is located at the top of the refrigerator
compartment.
A new water filter should display a reading of 99%. The reading in
the display will decrease as the filter life is used. When the display
reads 10%, it is time to order a replacement water filter. It is
recommended that you replace the disposable water filter when
the filter display changes to 0% OR when water flow to your water
dispenser or ice maker decreases noticeably. See "Changing the
Water Filter" later in this section.
WATER FILTER
PERCENTLEFT
After changing the water filter, press and hold RESET for
2 seconds until the status display changes to 99%.
_J_,..,,.,,,_,J_./1 301/syse[T_
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected waters that may contain
filterable cysts.
Replacing the Water Filter
1. Locate the water filter cap in the front base grille. Rotate the
cap counterclockwise to a vertical position and pull the cap
and filter cartridge out through the base grille.
NOTE: There will be water in the filter. Some spilling may
occur.
4. Slide the cap (removed in Step 2) onto the new filter. See
illustration in Step 2.
5. With cap in the vertical position, push the new water filter into
the base grille until it stops. Rotate the cap clockwise to a
horizontal position.
1111 1
6. Flush the water system. See "Water and Ice Dispensers."
Using the Dispenser Without the Water Filter
You can run the dispenser without a water filter. Your water will not
be filtered.
1. Remove the water filter.
2. Slide the cap off the end of the filter.
3. With the cap in the vertical position, insert the cap into the
base grille until it stops.
IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
4. Rotate the cap to a horizontal position. The cap might not be
even with the base grille.
8

IMPORTANT: After connecting the refrigerator to a water source
or replacing the water filter, flush the water system. See "Water
and Ice Dispensers."
Style I
To Turn the Ice Maker On/Off:
The On/Off switch for the ice maker is a wire shutoff arm located
on the side of the ice maker.
1. To turn the ice maker on, simply lower the wire shutoff arm.
NOTE: Your ice maker has an automatic shutoff. As ice is
made, the ice cubes will fill the ice storage bin and the ice
cubes will raise the wire shutoff arm to the OFF (arm up)
position.
2. To manually turn the ice maker off, lift the wire shutoff arm to
the OFF (arm up) position and listen for the click to make sure
the ice maker will not continue to operate.
t1"
To Remove and Replace the Ice Bin:
1. Flip up the covering panel.
A..................._ ............... _i
[ J
A. Ice maker cover
2. Lift the wire shutoff arm so it clicks into the OFF (up)
position. Ice can still be dispensed, but no more can be made.
3. Lift up the front of the storage bin and pull the ice bin forward.
4. Replace the bin by pushing it in all the way or the dispenser
will not work. Push the wire shutoff arm down to the ON
position to restart ice production. Make sure the door is
closed tightly.
Style 2
To Turn the Ice Maker On/Off:
The On/Off switch is located on the top right side of the freezer
compartment.
1. To turn the ice maker on, slide the control to the ON (left)
position.
NOTE: Your ice maker has an automatic shutoff. The ice
maker sensors will automatically stop ice production, but the
control will remain in the ON (left) position.
2. To manually turn the ice maker off, slide the control to the OFF
(right) position.
To Remove and Replace the Ice Storage Bin:
1. Hold the base of the storage bin with both hands and press
the release button to lift the storage bin up and out.
NOTE: It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The
sensor cover ("flipper door") on the left wall of the freezer
stops the ice maker from producing ice if the door is open or
the storage bin is removed.
2. Replace the storage bin on the door and push down to make
sure it is securely in place.
i,
/
Clean the Ice Storage Bin
1. Empty the ice container. Use warm water to melt the ice if
necessary.
NOTE: Do not use anything sharp to break up the ice in the
bin or bucket. This can cause damage to the ice container and
the dispenser mechanism.
2. Wash ice bin with a mild detergent, rinse well and dry
thoroughly. Do not use harsh or abrasive cleaners or solvents.
Remember
• Allow 24 hours to produce the first batch of ice. Allow 3 days
to completely fill ice container.
Discard the first three batches of ice produced to avoid
impurities that may be flushed out of the system.
The quality of your ice will be only as good as the quality of the
water supplied to your ice maker.
Avoid connecting the ice maker to a softened water supply.
Water softener chemicals (such as salt) can damage parts of
the ice maker and lead to poor quality ice. If a softened water
supply cannot be avoided, make sure the water softener is
operating properly and is well maintained.
It is normal for the ice cubes to be attached at the corners.
They will break apart easily.
For Style 1 ice maker, do not force the wire shutoff arm up or
down.
• Do not store anything on top of the ice maker or in the ice
storage bin.

REFRIGERATORFEATURES
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
The shelves in your refrigerator are adjustable to meet your
individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will make
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open, and save energy.
Shelves
1. Remove the shelf by tilting it up at the front and lifting it out of
the shelf supports. Pull shelf straight out.
2. Reposition the shelf supports in the desired location. Check
that they are level and securely in position.
3. Place the back of the shelf in the shelf supports.
4. Lower the front of the shelf and check to make sure that it is
securely in position.
De P@
The deli pan is temperature-controlled.
The temperature in the deli pan can be set to meet the National
Livestock and Meat Board recommended storage temperature
range of 28°F to 32°F (-2°C to 0°C) for fresh meats. See "Deli Pan
Temperature Control."
The rubber air connector (located in the back of the meat drawer)
directs air from the air supply hole into the meat drawer. If the air
connector comes off, replace it by pushing it into the square
opening on the back of the drawer.
Remove and Replace the Deli Pan Cover
1.
2. Remove the food from the deli pan cover.
Pull the pan out about 4" (10.16 cm). Reach under the glass
shelf with both hands and lift gently upward until back of shelf
is free.
3. Tilt the shelf at an angle and remove the shelf from the
refrigerator. Be sure not to bump the glass.
4. Replace the deli pan cover. Hold the deli pan cover firmly with
both hands. Tilt the cover at an angle and position it above the
shelf supports. Place the shelf gently on supports.
The deli pan control adjusts the storage temperature of the deli
pan. Cold air flows into the deli pan through the air duct between
the freezer and the refrigerator. Setting the controls allows more or
less cold air through the air duct. See "Deli Pan."
Adjust the Deli Pan Temperature
• If a colder temperature is needed, turn the control toward
COLDER.
IMPORTANT: If a food item freezes in the deli pan or crisper,
or the water dispenser stops working, turn the deli pan
temperature control to COLD. If the water dispenser stops
working, water in the line may have frozen.
If a less cold temperature is needed, turn the control toward
COLD.
• Turning the control all the way to COLD will shut off the air
duct completely.
hI
II
/
J
10

Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and
moisture-proof. Rewrap if necessary. See the following chart for
storage times. When storing meat longer than the times given,
freeze the meat.
Fresh fish or shellfish ........................ use same day as purchased
Chicken, ground beef, variety meat (liver, etc.) ................ 1-2 days
Cold cuts, steaks/roasts .................................................. 3-5 days
Cured meats .................................................................. 7-10 days
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or
plastic containers with tight lids.
Remove and Replace the Crisper Drawers
1= Slide the crisper drawer straight out to the stop. Lift the front
of the drawer with one hand while supporting the bottom of
the drawer with your other hand and slide the drawer out the
rest of the way.
NOTE: For long-term storage, store eggs in a covered container
or in their original carton on an interior shelf.
1=
2.
Wne <
Remove the rack by pulling it straight out from the shelf.
Replace the rack by sliding it in between the shelf and the wall
of the refrigerator.
FREEZERFEATURES
2. Toreplace the crisper drawer, place the drawer onto slides. Be
sure the small bracket on the side of the crisper drawer is
behind the pin on the slide.
%
A. Bracket
B. Pin
3. Push the drawer back and then pull it forward to be sure it is
securely in position.
Clean the Crisper Covers
1. To clean the top crisper cover, remove deli pan.
2. To clean the bottom crisper cover, first remove the top crisper
drawer.
1=
2.
F }eze Shef
Remove the shelf by lifting it up and pulling it straight out.
Replace the shelf by putting it over the supports and lowering
it into place.
Frozen Food Storage Guide
Storage times will vary according to the quality and type of food,
the type of packaging or wrap used (should be airtight and
moisture-proof), and the storage temperature. Ice crystals inside a
sealed package are normal. This simply means that moisture in
the food and air inside the package have condensed, creating ice
crystals.
Put no more unfrozen food into the freezer than will freeze within
24 hours (no more than 2 to 3 Ibs of food per cubic foot
[907-1,350 g per 28 L] of freezer space). Leave enough space in
the freezer for air to circulate around packages. Be sure to leave
enough room for the door to close tightly.
For more information on preparing food for freezing, check a
freezer guide or reliable cookbook.
11

The freezer basket can be used to store bags of frozen fruits and
vegetables that may slide off freezer shelves.
Remove and Replace the Freezer Basket
1. Pull the basket forward out to the stop.
2. Lift the front of the basket and slide it out the rest of the way.
Door Bins
1. Remove the bin by lifting it up and pulling it out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
REFRIGERATORCARE
3= Replace the basket by positioning it on the side wall guide
rails. Lift the basket front slightly while pushing it past the
guide rail stops and slide basket in the rest of the way.
DOOR FEATURES
,,o_,0[ Ip,,S[l[ el
The utility compartment can be placed in any position on the
refrigerator door.
Remove and Replace the Utility Bin
1. Remove utility compartment by grasping both ends and lifting
compartment up and out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
I% ! ,+
©oo[ l[is
Large door bins hold gallon containers and the smaller door bins
hold 2-liter bottles. The door bins are adjustable and removable
for easy cleaning and adjusting.
Gallon Door Bin
NOTE: The gallon door bin can only be placed on the lower
support.
1. Insert the attachment brackets into the adjustment slots on
the door.
2. Push down on the bin to secure tabs.
3. If necessary, adjust interior shelves to allow for milk jugs and
tall beverage containers stored in the gallon door bin.
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid
buildup of odors. Wipe up spills immediately.
To Clean Your Refrigerator:
1. Remove the top grille. See "Power On/Oft Switch."
2. Press power switch to OFE
3. Remove all removable parts from inside, such as shelves,
crispers, etc.
4. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
• Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning
waxes, concentrated detergents, bleaches or cleansers
containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning tools. These can
scratch or damage materials.
• To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs to 1 qt
[26 g to 0.95 L] of water).
12

5. Clean the exterior surfaces.
Broken Glass Hazard
Do not hit refrigerator glass doors.
Protect glass surface and edges during installation or
removal of doors.
Failure to do so can result in serious eye injury or
minor cuts.
Glass door panels: Wash glass door panels with a clean
sponge or soft cloth and a mild detergent in warm water.
NOTE: Do not hit the glass with pots, pans, furniture, toys, or
other objects. Scratching, hitting, jarring or stressing the glass
may weaken its structure, causing an increased likelihood of
breakage at a later date.
Stainless steel panels: Wash stainless steel with a clean
sponge or soft cloth and a mild detergent in warm water.
To keep your stainless steel refrigerator looking like new
and to remove minor scuffs or marks, it is suggested that
you use the manufacturer's approved Stainless Steel
Cleaner and Polish.
IMPORTANT: This cleaner isfor Stainless Steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come
into contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. If unintentional contact
does occur, clean plastic part with a sponge and mild
detergent in warm water. Dry thoroughly with a soft cloth. To
order the cleaner, see "Accessories."
6. Press the power switch to ON.
7. Replace the top grille. See "Power On/Off Switch."
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to
replace the bulb with one of the same size and shape. The
dispenser light requires a heavy duty 10-watt bulb. All other lights
require a 40-watt maximum appliance bulb. Replacement bulbs
are available from your dealer or appliance store.
1. Remove the top grille. See "Power On/Off Switch."
2. Press the power switch to OFR
3. Remove light shield when applicable as shown.
NOTE: To clean a light shield, wash it with warm water and a
liquid detergent. Rinse and dry the shield well.
4. Remove light bulb and replace with one of the same size,
shape and wattage.
5. Replace light shield when applicable as shown.
6. Press the power switch ON.
7. Replace the top grille. See "Power On/Off Switch."
Dispenser Light (on some models)
Reach through the dispenser area to remove and replace light
bulb.
............................................1
A.Dispenserlight
Refrigerator Control Panel Light
Style 1
Reach behind the refrigerator control panel to remove and replace
light bulb.
Style 2
Use a V4"hex-head screwdriver to remove and replace the light
shield.
Freezer and Crisper Lights
• Remove the light shield by grasping the sides and squeezing
in toward the center. Once the side hooks of the shield are free
from the freezer or crisper lining, pull down the shield.
Replace the light shield by squeezing the top and bottom
toward the center and inserting the hooks into the slotted
holes. Once the hooks are in place, snap the front tab into the
slotted hole.
If the power will be out for 24 hours or less, keep the door or
doors closed (depending on your model) to help food stay cold
and frozen.
If the power will be out for more than 24 hours, do one of the
following:
• Remove all frozen food and store it in a frozen food locker.
• Place 2 Ibs (907 g) of dry ice in the freezer for every cubic foot
(28 L) of freezer space. This will keep the food frozen for 2 to
4 days.
• If neither a food locker nor dry ice is available, consume or can
perishable food at once.
REMEMBER: A full freezer stays cold longer than a partially filled
one. A freezer full of meat stays cold longer than a freezer full of
baked goods. If you see that food contains ice crystals, it may be
refrozen, although the quality and flavor may be affected. If the
condition of the food is poor, dispose of it.
13

Your refrigerator is equipped with the Holiday feature, which is
designed for the traveler who wishes to turn off the lights and ice
maker. By selecting this feature, the temperature set points remain
unchanged, the ice maker will be disabled and the interior lights
will turn off. For most efficient refrigerator operation, it is
recommended to exit the Holiday feature when it is no longer
required.
If You Choose to Leave the Refrigerator On While You're
Away:
1. Use up any perishables and freeze other items.
2. Press the HOLIDAY pad.
3. If your refrigerator has an automatic ice maker, shut off water
supply to the ice maker.
4. Empty the ice bin.
5. When you return from vacation, press HOLIDAY to return to
normal operation.
If You Choose to Turn the Refrigerator Off Before You
Leave:
1. Remove all food from the refrigerator.
2. If your refrigerator has an automatic ice maker:
• Turn off the water supply to the ice maker at least one day
ahead of time.
• When the last load of ice drops, raise the wire shutoff arm
to the OFF (up) position.
3. Depending on your model, turn the Thermostat Control
(or Refrigerator Control) to OFE See "Using the Control(s)."
4. Clean refrigerator, wipe it, and dry well.
5. Tape rubber or wood blocks to the tops of both doors to prop
them open far enough for air to get in. This stops odor and
mold from building up.
Moving
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1. If your refrigerator has an automatic ice maker:
• Turn off the water supply to the ice maker at least one day
ahead of time.
• Disconnect the water line from the back of the refrigerator.
• When the last load of ice drops, raise the wire shutoff arm
to the OFF (up) position or move the switch to the OFF
(right) setting.
2. Remove all food from the refrigerator and pack all frozen food
in dry ice.
3. Empty the ice bin.
4. Depending on the model, turn the Thermostat Control or
Refrigerator Control to OFE See the "Using the Control(s)"
section.
5. Unplug refrigerator.
6. Empty water from the defrost pan.
7. Clean, wipe, and dry thoroughly.
8. Take out all removable parts, wrap them well, and tape them
together so they don't shift and rattle during the move.
9. Depending on the model, raise the front of the refrigerator so it
rolls more easily OR screw in the leveling legs so they don't
scrape the floor. See the "Level Refrigerator" section in the
Installation Instructions.
10. Tape the doors closed and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back and refer to
the Installation Instructions for preparation instructions. Also, if
your refrigerator has an automatic ice maker, remember to
reconnect the water supply to the refrigerator.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your refrigerator will not operate
Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Has a household fuse or circuit breaker tripped? Replace
the fuse or reset the circuit breaker.
Is the refrigerator or freezer control turned to the OFF
position? See "Using the Control(s)."
Is the refrigerator defrosting? Recheck to see if the
refrigerator is operating in 30 minutes. Your refrigerator will
regularly run an automatic defrost cycle.
Is the refrigerator not cooling? For models with digital
controls, turn the unit OFF then ON again to reset. See "Using
the Control(s)." If this does not correct the problem, call for
service.
The lights do not work
Is the refrigerator in "Holiday?" See "Holiday" feature.
Is alight bulb loose in the socket or burned out? See
"Changing the Light Bulb(s)."
Has the door been open more than 10 minutes? When the
door is held open for more than 10 minutes the interior lights
will shut off.
•Is the power supply cord unplugged? Plug into a grounded
3 prong outlet.
14

The motor seems to run too much
Is the room temperature hotter than normal? The motor will
run longer under warm conditions. At normal room
temperatures, expect your motor to run about 80% of the
time. Under warmer conditions, it will run even more.
Has alarge amount of food just been added to the
refrigerator? Adding a large amount of food warms the
refrigerator. The motor normally will run longer to cool the
refrigerator back down.
Are the doors opened often? The motor will run longer when
this occurs. Conserve energy by getting all items out at one
time, keeping food organized, and closing the door as soon as
possible.
Are the controls not set correctly for the surrounding
conditions? See "Using the Control(s)."
Are the doors not closed completely? Close the doors
firmly. If they do not close completely, see "The doors will not
close completely" later in this section.
Are the door gaskets not sealed all the way around?
Contact a technician or other qualified person.
NOTE: Your new refrigerator will run longer than your old one
due to its high-efficiency motor.
The refrigerator seems to make too much noise
The sounds may be normal for your refrigerator. See "Normal
Sounds."
The ice maker is not producing ice or not enough ice
Has the ice maker just been installed? The ice bin holds
14 to 17 Ibs (6.4 to 7.7 kg) of ice. The ice bin can take three to
four days to completely fill, if no ice is used during this time.
Is the freezer temperature cold enough to produce ice?
Wait 24 hours after ice maker hookup for ice production. See
"Using the Control(s)."
Is the ice maker wire shutoff arm in the OFF (arm up)
position (on some models)? Lower the wire shutoff arm to
the ON (arm down) position. See "Ice Maker and Storage Bin."
Is the ice maker switch in the OFF (right) position (on
some models)? Move ice maker switch to the ON (left)
position. See "Ice Maker and Storage Bin."
Is the water line shutoff valve to the refrigerator turned
on? Turn on the water valve. See "Connect Water Line to
Refrigerator" in the Installation Instructions.
Does the ice maker mold have water in it or has no ice
been produced? Make sure your refrigerator has been
connected to a water supply and the supply shutoff valve is
turned on. See "Connect Water Line to Refrigerator" in the
Installation Instructions.
Is an ice cube jammed in the ice maker ejector arm?
For models with an interior ice bin, remove the ice from the
ejector arm with a plastic utensil. For models with an ice bin
located on the freezer door, access the ice maker by
depressing the ice sensor door on the upper left side of the
freezer interior. While depressing the sensor door, lift the ice
maker service door and remove the ice from the ejector with a
plastic utensil. See "Ice Maker and Storage Bin."
Has a large amount of ice just been removed? Allow three
to four days for an empty ice bin to completely fill, if no ice is
used during this time.
Are the controls set correctly? See "Using the Control(s)."
Is there awater filter installed on the refrigerator? The filter
may be clogged or installed incorrectly. Check the filter
installation instructions to ensure that the filter was installed
correctly and is not clogged. If installation or clogging is not a
problem, call a technician or other qualified person.
NOTE: If not due to any of the above, there may be a problem
with the water line. Call for service.
Off-taste, odor or gray color in the ice
Are the plumbing connections new, causing discolored or
off-flavored ice? Discard the first few batches of ice.
Have the ice cubes been stored too long? Throw old ice
away and make a new supply.
Does the freezer and ice bin need to be cleaned? See
"Cleaning" or "Ice Maker and Storage Bin."
Has food in the freezer or refrigerator been wrapped
properly? Use airtight, moisture-proof packaging to avoid
odor transfer from stored food.
Does the water contain minerals (such as sulfur)? A filter
may need to be installed to remove the minerals.
Is there awater filter installed on the refrigerator? Gray or
dark discoloration in ice indicates that the water filtration
system needs additional flushing. Run additional water
through the water dispenser to flush the water filtration system
more thoroughly (at least 6 qt [5.7 L] or 3 to 4 minutes initially).
Discard discolored ice.
The ice dispenser will not operate properly
•Is the freezer door closed completely? Push the door firmly
shut. If it will not shut all the way, see "The doors will not close
completely" later in this section.
Is the ice bin installed correctly? For models with an interior
ice bin, push the ice bin in all the way. If the ice bin does not
go in all the way, it may not be put in straight. Pull it out and try
again. For models with an ice bin located on the freezer door,
the bin should sit level. To remove the bin, press the release
button on the right side of the bin and lift straight up. Replace
the bin in the door making sure it is properly aligned and
snapped securely into place. See "Ice Maker and Storage
Bin."
Has the wrong ice been added to the bin? Use only cubes
produced by the current ice maker. If other cubes have been
added, remove all cubes and check to see that none have
become stuck in the delivery chute.
Has the ice frozen in the ice bin? Shake the ice bin to
separate cubes. If cubes do not separate, empty bin and wait
24 hours for ice to restock.
Has the ice melted around the auger (metal spiral) in the
ice bin? Dump the ice cubes and clean the ice bin completely.
Allow 24 hours for the ice maker to restock. Do not try to
remove the melted ice with a sharp object. You could damage
the ice bin.
15

•Is ice stuck in the delivery chute? Clear the ice from the
delivery chute with a plastic utensil. Do not use anything sharp
to remove the ice. You could cause damage.
Cut Hazard
Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.
Is the ice dispenser stalling while dispensing "crushed"
ice? Stop dispensing ice. Change the ice button from
"crushed" to "cubed." Depress the ice dispenser arm using a
sturdy glass. If cubed ice dispenses correctly, depress the
button for "crushed" ice and begin dispensing again. See
"Water and Ice Dispensers."
Is there ice in the bin? See "The ice maker is not producing
ice" earlier in this section.
Has the dispenser arm been held in too long? Release
dispenser arm. Ice will stop dispensing when the arm is held in
too long. Wait three minutes for dispenser motor to reset
before using again. It is best to take large amounts of ice
directly from the ice bin, not through the dispenser.
The ice storage bin is difficult to remove
Cut Hazard
Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.
The water dispenser will not operate properly
Has the water system not filled? The water system needs to
be filled the first time it is used. Use a sturdy container to
depress the water dispenser bar until the water begins to flow.
Flush the water system by dispensing and discarding
6 qt (5.7 L) of water. Cleaning the system will take
approximately 3 to 4 minutes and will help clear air from the
line. Additional flushing may be required in some households.
See "Water and Ice Dispensers."
Is the water shutoff valve not turned on or the water line
connected at the source? Make sure the water shutoff valve
is turned on and the water source is connected to the
refrigerator. See "Connect Water Line to Refrigerator" in the
Installation Instructions.
Is the water shutoff valve clogged or incorrectly installed?
See "Connect Water Line to Refrigerator" in the Installation
Instructions. If clogging or installation is not a problem, call for
service or contact a plumber.
Is there akink in the home water source line? If you find or
suspect a kink in the water line, call for service.
Is there awater filter installed on the refrigerator? The filter
may be clogged or incorrectly installed. First, check the filter
installation instructions to ensure that the filter was installed
correctly and is not clogged. If installation or clogging is not a
problem, call for service.
Water is leaking from the dispenser
Glass not being held under the dispenser long enough?
Hold the glass under the dispenser 2 to 3 seconds after
releasing the dispenser lever.
Is there awater filter installed on the refrigerator? The
water filtration system may have air in the lines, causing water
to drip. Additional flushing may help clear air from the lines.
Normal dispenser use should flush air from the lines within 24
to 72 hours.
Water flow from the dispenser decreases noticeably
Is there awater filter installed on the refrigerator?
The filter may be full or incorrectly installed. Remove the water
filter cartridge. See "Water Filtration System." Operate the
dispenser. If the water flow increases noticeably, replace the filter.
Is the ice storage bin difficult to remove (on some models)?
For models with an ice storage bin located on the freezer door,
select "cubed" ice. Using a sturdy glass, quickly depress and
release the ice dispenser lever. Open the freezer door, depress the
release button on the ice storage bin and lift upward. See "Ice
Maker and Storage Bin."
16

The dispenser water is not cool enough
•Has the refrigerator been newly installed? Allow 24 hours
for the refrigerator to cool completely.
• Has a large amount of water been recently dispensed?
Allow 24 hours for the water to cool completely.
• Has water not been recently dispensed? The first glass of
water may not be cool. Discard the first glass of water.
The divider between the two compartments is warm
The warmth is probably due to normal operation of the automatic
exterior moisture control. If still concerned, call for service.
Temperature is too warm
Are the air vents blocked in either compartment? This
obstructs cold air movement between the compartments.
Remove any objects from in front of the air vents. See
"Ensuring Proper Air Circulation" for the location of air vents.
Are the door(s) opened often? The refrigerator will warm
when this occurs. Keep the refrigerator cool by getting all
items out at one time, keeping food organized, and closing the
door as soon as possible.
Has a large amount of food just been added to the
refrigerator or freezer? Adding a large amount of food
warms the refrigerator. It can take several hours for the
refrigerator to return to the normal temperature.
•Are the controls set correctly for the surrounding
conditions? See "Using the Control(s)."
Is the refrigerator not cooling? For models with digital
controls, turn the unit OFF then ON again to reset. See "Using
the Control(s)." If this does not correct the problem, call for
service.
There is interior moisture buildup
•Are the air vents blocked in the refrigerator? Remove any
objects from in front of the air vents. See "Ensuring Proper Air
Circulation" for the location of air vents.
Are the door(s) opened often? Avoid humidity buildup by
getting all items out at one time, keeping food organized, and
closing the door as soon as possible.
Is the room humid? It is normal for moisture to build up
inside the refrigerator when the room air is humid.
Is the food packaged correctly? Check that all food is
securely wrapped. Wipe off damp food containers before
placing in the refrigerator.
Are the controls set correctly for the surrounding
conditions? See "Using the Control(s)."
Was aself-defrost cycle completed? It isnormal for
droplets to form after the refrigerator self-defrosts.
The doors will not close completely
•Are food packages blocking the door open? Rearrange
containers so that they fit more tightly and take up less space.
Is the ice bin out of position? For models with an interior ice
bin, push the ice bin in all the way. Ifthe ice bin does not go in
all the way, it may not be put in straight. Pull it out and try
again. For models with an ice bin located on the freezer door,
the bin should sit level. To remove the bin, press the release
button on the right side of the bin and lift straight up. Replace
the bin in the door making sure it is properly aligned and
snapped securely into place. See "Ice Maker and Storage
Bin."
Are the pans, shelves, bins, or baskets out of position?
Put the crisper cover and all pans, shelves, bins, and baskets
back into their correct positions. See "Crisper Drawers and
Covers" for more information.
Does the refrigerator wobble or seem unstable? Level the
refrigerator. See "Adjust Doors" and "Level Refrigerator" in the
Installation Instructions.
The doors are difficult to open
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Are the gaskets dirty or sticky? Clean gaskets according to the
directions in "Cleaning."
17

ASSISTANCEOR SERVICE
Before calling for assistance or service, please check
"Troubleshooting." It may save you the cost of a service call. If you
still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If You Need Replacement Parts
If you need to order replacement parts, we recommend that you
only use factory specified replacement parts. Factory specified
replacement parts will fit right and work right because they are
made with the same precision used to build every new
THERMADOR ® appliance.
To locate factory specified replacement parts in your area, call
1-800-944-2904.
Call the Thermador Customer Interaction Center toll free:
1-800-944-2904.
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
• Referrals to local dealers.
For Further Assistance
If you need further assistance, you can write to Thermador with
any questions or concerns at:
BSH Home Appliances
5551 McFadden Ave.
Huntington Beach, CA 92694
Please include a daytime phone number in your correspondence.
n n{ sdc
Call the Thermador Customer Interaction Center toll free:
1-800-944-2904 Monday to Friday 5:00 a.m. - 6:00 p.m. (PST).
Saturday 8:30 a.m. - 4:30 p.m. (PST).
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
• Referrals to local dealers.
For Service in Canada
Call 1-800-944-2904. Thermador Canada designated service
technicians are trained to fulfill the product warranty and provide
after-warranty service, anywhere in Canada.
For Further Assistance
If you need further assistance, you can write to Thermador
Canada with any questions or concerns at:
BSH Home Appliances
5551 McFadden Ave.
Huntington Beach, CA 92694
Please include a daytime phone number in your correspondence.
WATERFILTER
CERTIFICATIONS
State of California
Deparhnem of Health Services
WaterTreatment Device
CertificateNumber
03- 1551
Date Issued: Jlmuary 21,2003
"[rademark/Model Designation Replacement Elements
Whirlpool Wt -NLC240V NI,C240V
Whirlpool WF-LC4OOV LC40(/_
Manufacturer: WhirlpooiCorp '
Rated Ca_
240 gaI
400 gal
Do not use where water is microbiologically unsafe or with water of unknown quality, except that systems
certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
To order replacement parts, in the U.S. or Canada, call
1-800-944-2904 for the authorized parts distributor in your area.
Stainless Steel Cleaner and Polish:
Order Part #4396920.
Replacement Filter:
Order Part #2255709 (LC4OOV).
18

PERFORMANCEDATA SHEETS
Base Grille Water Filtration System
Model WF-LC400V/LC400V Capacity 400 Gallons (1514 Liters)
System tested and certified by NSF International against NSF/ANSI Standard 42
for the reduction of Chlorine Taste and Odor, Particulate Class I*; and against
NSF/ANSI Standard 53 for the reduction of Lead, Mercury, Atrazine, Benzene,
Toxaphene, p-dichlorobenzene, 2, 4-D, Cysts, Turbidity and Asbestos.
This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The
concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the
permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42 and 53.
Substance Reduction NSF Reduction Average Influent Challenge Maximum Average Minimum %Average %
Aesthetic Effects Requirements Influent Concentration Effluent Effluent Reduction Reduction
Chlorine Taste/Odor _>50% 2.0 mg/L + 10% 0.05 mg/L 97.1% 97.6%
Particulate Class I* At least 10,000 2,300/mL 99.9%
4,100/mL** 99.3%
5,366,667/mL 0.06 mg/L_>85% 2.1 mg/L particles/mL
Contaminant NSF Reduction Average Influent Challenge Maximum Average Minimum %Average %
Reduction Requirements Influent Concentration Effluent Effluent Reduction Reduction
Lead: @ pH 6.5 0.01 mg/L 0.152 mg/L1- 0.15 mg/L + 10% 0.001 mg/L 0.001 mg/L 99.34% 99.34%
Lead: @ pH 8.5 0.01 mg/L 0.143 mg/L1- 0.15 mg/L _+10% 0.001 mg/L 0.001 mg/L 99.30% 99.30%
Mercury: @ pH 6.5 0.002 mg/L 0.0061 mg/L 0.006 mg/L _+10% 0.0004 mg/L 0.0003 mg/L 93.5% 96.7%
Mercury: @ pH 8.5 0.002 mg/L 0.0057 mg/L 0.0058 mg/L _+10% 0.0008 mg/L 0.00051 mg/L 85.8% 91.2%
Benzene 0.005 mg/L 0.0162 mg/L 0.015 _+10% 0.0005 mg/L 0.001 mg/L 96.3% 96.3%
p-dichlorobenzene 0.075 mg/L 0.220 mg/L 0.225 _+10% 0.0005 mg/L 0.0005 mg/L 99.7% 99.7%
Toxaphene 0.003 mg/L 0.014 mg/L 0.015 _+10% 0.0014 mg/L 0.001 mg/L 90% 92.96%
Atrazine 0.003 mg/L 0.0086 mg/L 0.009 mg/L _+10% 0.0005 mg/L 0.0005 mg/L 94.25% 94.25%
2, 4-D 0.07 mg/L 0.197 mg/L 0.210 _+10% 0.058 mg/L 0.0137 mg/L 70.6% 93.06%
Asbestos 99% 26 x 107 107to 108fibers/L1-1- 0.18 x 107mg/L 0.18 x 107mg/L 99.93 99.93%
Cysts:): 99.95% 111,000/mL 50,000/L min. 1 mg/L 1 mg/L 99.99% 99.99%
Turbidity 0.5 NTU 11.00 NTU 11 _+1 NTU 0.40 NTU 0.35 NTU 96.4% 96.8%
Test Parameters: pH = 7.5 _+0.5 unless otherwise noted.
Temp. = 63°F (17.2°C).
• It is essential that operational, maintenance, and filter
replacement requirements be carried out for the product to
perform as advertised.
•Model WF-LC400V: The filter monitor system measures the
amount of water that passes through the filter and alerts you
to replace the filter. When 90% of the filter's rated life is used,
the filter indicator light changes from green to yellow. When
100% of the filter's rated life is used, the filter indicator light
changes from yellow to red, and it is recommended that you
replace the filter. Use replacement cartridge LC400V, part
#2255709. 2007 suggested retail price of $39.99 U.S.A./
$49.95 Canada. Prices are subject to change without notice.
• The product is for cold water use only.
• Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used
on disinfected waters that may contain filterable cysts.
• Refer to the front cover or "Accessories" section for the
Manufacturer's name, address and telephone number.
Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa).
• Refer to the "Warranty" section for the Manufacturer's limited
warranty.
Application Guidelines/Water Supply Parameters
Water Supply City or Well
Water Pressure 30 - 120 psi (207 - 827 kPa)
Water Temperature 33 ° - 100°F (0.6 ° - 37.8°C)
Service Flow Rate 0.5 GPM (1.89 L/min.) @ 60 psi.
*Class I particle size: >0.5 to <1 um
**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.
1-These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.
1-1-Fibersgreater than 10 um in length
SBased on the use of Cryptosporidium parvum oocysts
® NSF is a registered trademark of NSF International.
19

THERMADOI BUILT-INREFRIGERATORWARRANTY
TWO-YEAR FULL WAR RANTY
For two years from the date of purchase, when this refrigerator (excluding the water filter cartridges) is operated and maintained
according to instructions attached to or furnished with the product, Thermador will pay for factory specified replacement parts and
repair labor costs to correct defects in materials or workmanship. Service must be provided by aThermador designated service
company.
Water filter cartridge: 30 day limited warranty on water filter. For 30 days from the date of purchase, when this filter is operated and
maintained according to instructions attached to or furnished with the product, Thermador will pay for replacement parts to correct
defects in materials and workmanship.
THIRD THROUGH SIXTH YEAR FULL WARRANTY ON SEALED REFRIGERATION SYSTEM PARTS AS LISTED
In the third through sixth years from the date of purchase, when this refrigerator is operated and maintained according to instructions
attached to or furnished with the product, Thermador will pay for factory specified replacement parts and repair labor costs to correct
defects in materials or workmanship in the sealed refrigeration system. These parts are: compressor, evaporator, condenser, dryer, and
connecting tubing. Service must be performed by aThermador designated service company.
SEVENTH THROUGH TWELFTH YEAR LIMITED WARRANTY ON SEALED REFRIGERATION SYSTEM
In the seventh through twelfth years from date of purchase, when this refrigerator is operated and maintained according to instructions
attached to or furnished with the product, Thermador will pay for factory specified replacement parts to correct defects in materials or
workmanship in the sealed refrigeration system. These parts are: compressor, evaporator, condenser, dryer, and connecting tubing.
Thermador will not pay for:
1. Service calls to correct the installation of your refrigerator, to instruct you how to use your refrigerator, to replace house fuses or
correct house wiring or plumbing, to replace light bulbs, or to replace water filters other than as noted above.
2. Repairs when your refrigerator is used in other than normal, single-family household use.
3. Pickup and delivery. Your refrigerator is designed to be repaired in the home.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God, or use of products not
approved by Thermador or Thermador Canada.
5. Any food or medicine loss due to product failure.
6. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
7. Removal and replacement of trim or decorative panels that interfere with servicing the product.
8. Labor or parts installed by any non-designated service company during the full warranty period, unless approved by Thermador
before service is performed.
9. In Canada, travel or transportation expenses for customers who reside in remote areas.
10. Any labor costs during the limited warranty periods.
THERMADOR AND THERMADOR CANADA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or
province to province.
Outside the 50 United States and Canada, a different warranty may apply. Contact your authorized Thermador dealer to
determine if another warranty applies.
If you need service, first see the "Troubleshooting" section of this book. After checking "Troubleshooting," additional help can be found
by checking the "Assistance or Service" section or by calling the Thermador Customer Interaction Center, 1-800-735-4328 (toll-free),
from anywhere in the U.S.A. In Canada, contact your designated Thermador Canada service company or
call 1-800-735-4328. 5/o3
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your refrigerator to
better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label located on the inside wall of the refrigerator
compartment.
Dealer name
Address
Phone number
Model number
Serial number
Purchase date
20