thomann Stairville Pixel Panel 440 RGB MKII User manual

Pixel Panel 440 RGB MKII
eect panel
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
01.04.2019, ID: 461500

Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions.................................................................................................................................. 10
3 Features....................................................................................................................................................... 16
4 Installation and starting up................................................................................................................ 17
5 Connections and controls................................................................................................................... 21
6 Operating.................................................................................................................................................... 25
6.1 Menu overview................................................................................................................................. 30
6.2 Functions in 8-channel mode...................................................................................................... 31
6.3 Functions in 480-channel mode................................................................................................. 34
6.4 Network connection....................................................................................................................... 35
7 Maintenance.............................................................................................................................................. 37
7.1 Changing the front panel.............................................................................................................. 37
Table of contents
Pixel Panel 440 RGB MKII
3

8 Technical specications....................................................................................................................... 40
9 Plug and connection assignment.................................................................................................... 43
10 Troubleshooting...................................................................................................................................... 45
11 Cleaning....................................................................................................................................................... 47
12 Protecting the environment.............................................................................................................. 48
Table of contents
eect panel
4

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
Pixel Panel 440 RGB MKII
5

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
eect panel
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General information
Pixel Panel 440 RGB MKII
7

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – dangerous optical radiation.
General information
eect panel
8

Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General information
Pixel Panel 440 RGB MKII
9

2 Safety instructions
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the life of the device by regular breaks in operation and avoid switching it on and o
frequently. This device is not suitable for continuous use.
Intended use
Safety instructions
eect panel
10

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present.
Completely disconnect the device from the power supply before you open or
remove covers. Mount all covers and attach them rmly before connecting the
device again.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
Pixel Panel 440 RGB MKII
11

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or re. If in doubt, seek advice from a regis‐
tered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
eect panel
12

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
Pixel Panel 440 RGB MKII
13

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
eect panel
14

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire
hazard!
Only fuses of the same type may be used.
Safety instructions
Pixel Panel 440 RGB MKII
15

3 Features
nEect panel with 160 × SMD RGB LEDs
nControl protocols: DMX-512, ArtNet
nOperating modes: Stand alone (30 programmes), Master / Slave, DMX (eight or 480 chan‐
nels)
nIn and outputs: DMX (3 and 5-pin), RJ45
nOperating via buttons and display on the unit
nPower Twist connectors for self-supply and for supplying further devices
nRobust aluminium die-cast housing
nvariably positionable bracket with various mounting options
nthe supplied fastening strap allows to connect devices stably to each other
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
eect panel
16

4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Installation and starting up
Pixel Panel 440 RGB MKII
17

WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
NOTICE!
Risk of overheating
The distance between light output and the illuminated surface must be more
than 1.5 m (19.7in).
Provide sucient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
The horizontally movable and swivelling mounting bracket on the rear of the device is used for
secure mounting and alignment of the device on a tripod or the like using an Omega bracket.
Secure the device additionally with a safety cable, which is routed through the bracket, as
shown in the following gure.
Mounting options
Installation and starting up
eect panel
18

The mounting rails and fastening lugs are used for secure serial mounting of several Eect
panels, see gure below.
Connect the units to be controlled via suitable DMX or RJ45 data cable to the device. A max‐
imum of 30 devices may be serially connected to each serial port of the controller. The cable
length in a series connection for DMX operation should not exceed 100 metres.
Installation and starting up
Pixel Panel 440 RGB MKII
19

Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Please note that this device must not be connected to a dimmer.
Installation and starting up
eect panel
20