thomann Millenium BS-2400 User manual

BS-2400
stand
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
02.12.2021, ID: 168996 (V3)

Table of contents
1 General information................................................................................................................................. 4
2 Safety instructions..................................................................................................................................... 6
3 Features.......................................................................................................................................................... 8
4 Operating....................................................................................................................................................... 9
5 Technical specications....................................................................................................................... 14
6 EU Declaration of Conformity........................................................................................................... 16
7 Protecting the environment.............................................................................................................. 18
Table of contents
BS-2400
3

1 General information
This manual contains important instructions for the safe operation of the product. Read and
follow the safety instructions and all other instructions. Keep the manual for future reference.
Make sure that it is available to all those using the product. If you sell the product to another
user, be sure that they also receive this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change. Please refer to the latest version of the user manual which is ready for download
under www.thomann.de.
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Symbols and signal words
General information
stand
4

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
BS-2400
5

2 Safety instructions
This speaker stand is used for stable xing and height-adjustable installation of loudspeaker
cabinets. Use the product only as described in this user manual. Any other use or use under
other operating conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from improper use.
This product may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
product only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
stand
6

Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking
hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces
and choke! Never let children play unattended with the product.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip over and cause injuries and property damage. Install
the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property damage. Never exceed the maximum load capacity
specied for the stand.
Safety instructions
BS-2400
7

3 Features
Special features of the speaker stand:
nExtendible up to a height of about 2.08 m
nCentric load capacity up to 50 kg
nExtension tube made of hardened steel
nLegs and cross braces made of aluminium
nM10 female thread at the 35 mm ange
nTransport length when folded: 1.20 m
Features
stand
8

4 Operating
Unpack and check carefully there is no transportation damage before using the product. Keep
the equipment packaging. To fully protect the product against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may
tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
Operating
BS-2400
9

CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip
over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specied for the stand.
Operating
stand
10

NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your surface and after some time cause permanent dark
stains.
In case of doubt, do not put the rubber feet directly on the surface and use a suit‐
able underlay if necessary, i.e. felt-pad oor protectors or similar.
Comply with regulations
When installing and operating, make sure to follow the standards and regulations
that apply in your country.
Operating
BS-2400
11

1. Unfold the feet of the stand until the cross braces are in a horizontal position.
2. Fix this position with the safety screw on the slider to which the three feet are attached.
3. Lift the speaker box onto the extension tube. The weight of the speaker box to be
installed must not exceed the maximum centric load of 50 kg.
4. Fold out the hand crank.
5. To adjust the height, untighten the locking screw at the crank case.
6. Press and hold the yellow security button at the crank case while adjusting the desired
height with the hand crank.
7. Release the yellow security button at the crank case, x the position of the extension
tube with the locking screw at the crank case and fold the hand crank back in.
Setting up
Operating
stand
12

1. Fold out the hand crank.
2. Untighten the locking screw at the crank case.
3. Press and hold the yellow security button at the crank case while fully lowering the
extension tube.
4. Release the yellow security button at the crank case, x the position of the extension
tube with the locking screw at the crank case and fold the hand crank back in.
5. Lift o the speaker box from the extension tube.
6. Loosen the safety screw on the slider to which the three feet are attached.
7. Fold up the feet of the stand.
Dismounting
Operating
BS-2400
13

5 Technical specications
Height, max. 2.08 m
Total width 1.10 m
Adjustable stand height 1.24 m … 2.15 m
Stand footprint 0.62 m2
Truss length 370 mm
Stand tube diameter Æ36 mm
Holder type M10 female thread at the top end / 35 mm ange
Max. load capacity (for centric load) 50 kg
Transport dimensions (W × H × D) 140 mm × 1200 mm × 190 mm
Weight 8.2 kg
Colour Black
Technical specications
stand
14

Speaker ange 35 mm / M10 female thread
Set of 2 stands No
Material Steel
Crank stand Yes
Ringlock No
Pneumatics No
Foot type Tripod
Further information
Technical specications
BS-2400
15

6 EU Declaration of Conformity
Name and address of
manufacturer / EU-AR
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
THIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE SOLE RESPONSIBILITY OF:
Name and address of
manufacturer
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Product identication 168996 Millenium BLS-2400 Speaker Stand
THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN CONFORMITY WITH:
EU Community Legislation Machinery Directive 2006/42/EC
EU Declaration of Conformity
stand
16

Harmonised standards Safety of machinery
EN 1005-3:2002 + A1:2008
EN 13157:2004 + A1:2009
EN ISO 12100:2010
SIGNED FOR AND ON BEHALF OF:
Place and date of issue Burgebrach, 29 November 2021
EU Declaration of Conformity
BS-2400
17

7 Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that
they are collected for recycling. Please follow the notes and markings on the packaging.
Disposal of the packaging mate‐
rial
Protecting the environment
stand
18

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de