thomann Stageworx BLS-315 Pro Lighting Stand B User manual

BLS-315 Pro Lighting
Stand B Kit
speaker / light stand
User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
28.01.2021, ID: 511221

Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 12
4 Operating.................................................................................................................................................... 13
5 Technical specications....................................................................................................................... 18
6 Protecting the environment.............................................................................................................. 20
Table of contents
BLS-315 Pro Lighting Stand B Kit 3
speaker / light stand

1 General information
This manual contains important instructions for the safe operation of the product. Read and
follow the safety instructions and all other instructions. Keep the manual for future reference.
Make sure that it is available to all those using the product. If you sell the unit, please make
sure that the buyer also receives this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
4BLS-315 Pro Lighting Stand B Kit
speaker / light stand

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
BLS-315 Pro Lighting Stand B Kit 5
speaker / light stand

1.2 Notational conventions
This manual uses the following notational conventions:
The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch o the device.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General information
6BLS-315 Pro Lighting Stand B Kit
speaker / light stand

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
BLS-315 Pro Lighting Stand B Kit 7
speaker / light stand

2 Safety instructions
This speaker / light stand is used for stable xing and height-adjustable installation of loud‐
speaker cabinets and lights. Use the product only as described in this user manual. Any other
use or use under other operating conditions is considered to be improper and may result in
personal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This product may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
product only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
8BLS-315 Pro Lighting Stand B Kit
speaker / light stand

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in
the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the product. They could swallow the pieces and choke!
Never let children play unattended with the product.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may
tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
Safety
Safety instructions
BLS-315 Pro Lighting Stand B Kit 9
speaker / light stand

CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip
over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specied for the stand.
Safety instructions
10 BLS-315 Pro Lighting Stand B Kit
speaker / light stand

NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Safety instructions
BLS-315 Pro Lighting Stand B Kit 11
speaker / light stand

3 Features
Professional speaker and light stand
nMaterial: Steel / magnesium compound
nIndividually reinforced legs for high stability
nHeight: 150 to 310 cm
nStand space diameter 120 cm
nPipe diameter: 28 mm
n35 mm adapter for suitable speaker box
n28 mm adapter with M8×15 thread for single mounting of a spotlight (item no. 293511)
nCentric load capacity up to 30 kg
nOptional accessories:
– Cross beam 100 cm (Item no. 293501)
– Cross beam 120 cm (Item no. 293504)
– Bag (item no. 293512)
nMade in Europe
Features
12 BLS-315 Pro Lighting Stand B Kit
speaker / light stand

4 Operating
Unpack and check carefully there is no transportation damage before using the product. Keep
the equipment packaging. To fully protect the product against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
CAUTION!
Danger of tipping when transported under load
If the stand is moved without having removed the installed device, the stand may
tip over and cause injuries and property damage.
Remove the installed device before transporting the stand.
Operating
BLS-315 Pro Lighting Stand B Kit 13
speaker / light stand

CAUTION!
Danger of tipping on unsuitable surfaces
When the speaker stand is installed on soft or uneven ground, the stand may tip
over and cause injuries and property damage.
Install the stand only on even and solid surfaces.
CAUTION!
Danger of tipping due to overload
In case of overload, the stand may tip over and cause injuries and property
damage.
Never exceed the maximum load capacity specied for the stand.
Operating
14 BLS-315 Pro Lighting Stand B Kit
speaker / light stand

NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Comply with regulations
When installing and operating, make sure to follow the standards and regulations
that apply in your country.
Operating
BLS-315 Pro Lighting Stand B Kit 15
speaker / light stand

1. Unfold the feet of the tripod until the cross braces are in a horizontal position.
2. Fix this position with the safety screw on the slider to which the three feet are attached.
3. Pull out the two safety pin and loosen the two safety screws on the extension tubes.
4. Pull out the upper extension tube to the desired height and slide the safety pin through
the corresponding grid hole.
5. Fix the position of the upper extension tube with the safety screw on the upper tube
clamp.
6. Pull out the lower extension tube to the desired height and slide the safety pin through
the corresponding grid hole.
7. Fix the position of the lower extension tube with the safety screw on the lower tube
clamp.
8. Mount a spotlight or a speaker box. If necessary, screw one of the supplied adapters
rmly to the upper extension tube. Observe the instructions of the respective manufac‐
turers. The maximum load capacity of 30 kg in total must not be exceeded.
Setup
Operating
16 BLS-315 Pro Lighting Stand B Kit
speaker / light stand

1. Remove spotlight or speaker box.
2. Pull out the safety pin on the lower extension tube.
3. Loosen the safety screw on the lower tube clamp and slide the lower extension tube all
the way down.
4. Tighten the safety screw on the lower tube clamp.
5. Pull out the safety pin on the upper extension tube.
6. Loosen the safety screw on the upper tube clamp and slide the lower extension tube all
the way down.
7. Tighten the safety screw on the upper tube clamp.
8. If necessary, take o the adapter.
9. Loosen the safety screw on the slider to which the three feet are attached.
10. Fold up the feet of the tripod.
11. Pack all parts of the system in their original package, as possible, and store the package
in a dry place protected against moisture.
Dismounting
Operating
BLS-315 Pro Lighting Stand B Kit 17
speaker / light stand

5 Technical specications
Height, max. 3.10 m
Adjustable tripod height 1.50 m … 3.10 m
Floor space Æ1.20 m
Tripod tube diameter Æ28 mm
Holder type Flange, Æ35 mm
Adapter, Æ35 mm/36 mm
Adapter, Æ28 mm, M8×15 thread
Load, max. (with centric load) 30 kg
Transport dimensions (W×H×D) 137 mm × 1290 mm × 131 mm
Weight 6.1 kg
Colour black
Technical specications
18 BLS-315 Pro Lighting Stand B Kit
speaker / light stand

Stand type Lighting stand
Incl. crossbar No
Crank No
Material Steel-magnesium compound
Further information
Technical specications
BLS-315 Pro Lighting Stand B Kit 19
speaker / light stand

6 Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that
they are collected for recycling. Please follow the notes and markings on the packaging.
Disposal of the packaging mate‐
rial
Protecting the environment
20 BLS-315 Pro Lighting Stand B Kit
speaker / light stand