Thomas Regout BalanceBox 400 User guide

Mounting a BalanceBox®400 to a brick wall
Unpack the BalanceBox®400
and remove the Wall frame
cover and its bag of screws.
Slide the cover out at the top.
NOTE: the cover is NOT included
with the BalanceBox®400H

Mounting a BalanceBox®400 to a brick wall
Unpack the BalanceBox®400
Take the wall bracket out of the box
Note the slotted/slanted holes for level wall mounting.
Round holes for locking and mobile stand / floor
support mounting.
406
16"
300
11.8"
MOBILE STAND MOUNTING
LOCK SCREW HOLE
19
3/4"

Mounting a BalanceBox®400 to a brick wall
Use the indicated hole for mounting on the Mobile
stand
Hole for mobile stand

~1700 to 1800 mm
from the floor
Mounting a BalanceBox®400 to a brick wall
Measure the mounting height
from the floor.
And mark it

Mounting a BalanceBox®400 to a brick wall
Using a level, mark the
horizontal position of the other
hole level to the first hole.
(distance 406mm / 16”)

Mark the position of both holes
at a distance of 406mm /16”
Mounting a BalanceBox®400 to a brick wall

406mm/ 16”
Mark the position of both holes
at a distance of 406mm /16”
Mounting a BalanceBox®400 to a brick wall

Drill the holes in the brick wall,
use a 10 mm drill for plastic
plugs and 8mm diameter
screws, or appropriate drill for
other type wall anchors.
Mounting a BalanceBox®400 to a brick wall

Drill the holes in the brick wall,
use a 10 mm drill for plastic
plugs and 8mm diameter
screws, or appropriate drill for
other type wall anchors.
Mounting a BalanceBox®400 to a brick wall

Insert the plug or wall anchor.
Mounting hardware used
depends on the type of wall.
Hardware is not included.
Mounting a BalanceBox®400 to a brick wall