Thomas Regout BalanceBox 650 User guide

Mounting a BalanceBox®650 to a brick wall
Unpack the BalanceBox®650
Remove the application frame
cover (optional)

Mounting a BalanceBox®650 to a brick wall
Remove the wall frame covers:
Undo the screws front (1) and
side (2) and slide out to the top
(3).
1
2
3

Mounting a BalanceBox®650 to a brick wall
Remove the wall bracket (4):
Undo the screws left and right
and remove the bracket.
4

Mounting a BalanceBox®650 to a brick wall
Calculate the mounting
height of the
BalanceBox®650 wall
bracket at the bottom.
89 925 45
= 360 =
BalanceBox 650
= 700 =
= 260 =
= 700 =
= 600 =
740 mm

~1000 to 1500 mm
from the floor
Mounting a BalanceBox®650 to a brick wall
Measure the mounting height
from the floor.
And mark it

Mounting a BalanceBox®650 to a brick wall
Using a level, mark the
horizontal position of the other
holes level to the first hole.
(distance 750 mm)

Mark the position of the first
hole
Mounting a BalanceBox®650 to a brick wall

Mark the position the second
hole at 50 mm (2”)
Mounting a BalanceBox®650 to a brick wall
50 mm

Mark the position of the third
hole at 600 mm (23,6”)
Mounting a BalanceBox®650 to a brick wall
600 mm

Mark the position of the fourth
hole at 50 mm (2”)
Mounting a BalanceBox®650 to a brick wall
50 mm

700 mm
27.5”
600 mm
24”
Mark the position of the fourth
hole at 50 mm (2”)
Mounting a BalanceBox®650 to a brick wall
50 mm50 mm

Drill the holes in the brick wall,
use a 14 mm drill for plastic
plugs and 10 mm diameter
screws, or appropriate drill for
other type wall anchors.
Mounting a BalanceBox®650 to a brick wall

Drill the holes in the brick wall,
use a 14 mm drill for plastic
plugs and 10 mm diameter
screws, or appropriate drill for
other type wall anchors.
Mounting a BalanceBox®650 to a brick wall

Insert the plug or wall anchor.
Mounting hardware used
depends on the type of wall.
Hardware is not included.
Mounting a BalanceBox®650 to a brick wall

Mounting a BalanceBox®650 to a brick wall
Mount the wall bracket to the
wall.
Use 10mm wall anchors or
screws.

Lift the BalanceBox® in place
(warning: 46 kg, 2 people!)
Hold it there
Mounting a BalanceBox®650 to a brick wall

Mark the mounting holes at the
top of the BalanceBox®
Take the BalanceBox® down and
put it aside, drill the holes
Mounting a BalanceBox®650 to a brick wall

Lift the BalanceBox®650 in
place again (warning: 46 kg, 2
people!)
And tighten the screws at the
top.
Mounting a BalanceBox®650 to a brick wall

Mounting a BalanceBox®650 to a brick wall
Put the security screws back
securing the wall bracket to the
BalanceBox®.
Do not tighten the screws yet

Mounting a BalanceBox®650 to a brick wall
Always level the
BalanceBox® vertically!
Avoid it crashing into the
wall during use and noise
from misalignment.