Connection described below is also
applicable for any component having
digital output (TV, Cable & Satellite
boxes, MD, CD recorder/player)
NOTE:
• By default, SAT is set to use analog
input.
• After the connections are done,
check the receiver and make sure it
is set to the appropriate
digital/analog input by pressing the
DIGITAL button on the remote
control. The input will be displayed
after the source name . (SAT/OPTI
means SAT uses Optical Input)
• To change input connection, follow
step 3 in “Digital Connection”
described below.
• If a COAXIAL cable is used to
connect SAT to the receiver, follow
steps 3 in “Digital Connection” to
select COAXIAL.
• S-Video connection provides
better quality than composite
connection.
If S-Video is used on your DVD
receiver (SAT IN), MON OUT S-Video
should also be used, otherwise, no
picture will be displayed on TV.
Satellite & Digital Connections
Speakers
• Match the speaker cable color
to the speaker / receiver terminals
as shown on the illustration.
• Match the speaker to the
correct terminal on the receiver
(example: left speaker to left
speaker terminal on receiver)
NOTE:
• The color of the cable should
be the same as that on the
terminals.
• Connect the striped color cable
to the “-” terminal (both speaker
and receiver)
For details, please refer to
Instruction manual chapter
“Connecting the Speakers”
(Pg. 6)
Follow the illustration and
instructions provided to
hook up your speakers.
Speakers and Tuner Antenna
RCA Audio cable
(Analog)
Not Included
Composite Video
Cable (Usually
yellow)
1Piece
S-Video cable
Not Included
Optical Cable
(Digital)
Not Included
Coaxial Cable
(75Ω/ Digital)
Not Included
SCART Cable
1Piece
Audio/Video components
Follow the diagram to connect
audio or video components.
Follow the diagram to connect
your Satellite box to receiver.
ANTENNA HOOKUP
SPEAKER HOOKUP
Cables
To help you identify the cables used in audio-video, illustrations are provided below for your easy reference.
To OPTICAL IN of
MD / DVD / CD recorder.
A Connecting your Satellite
1Connect the RCA Audio cable.
2Connect the video cable
(composite or s-video)
B Digital Connections
To receive Dolby Digital format or
any digital signal, either a coaxial
or optical cable must be connected.
Follow the steps below for digital
connection.
1 Connect either the
COAXIAL or OPTICAL
cable (not included)
2Select SAT
3Press DIGITAL
button several times
on the remote
control to select the
input being used
(analog, coaxial,
or optical)
Connection
described below is
also
applicable for any
component having
analog output (TV,
Cable & Satellite
boxes, CD
recorder/player,)
BLUE / BLACK
BROWN / BLACK
RED / BLACK RED / BLACK
GREY / BLACK GREY / BLACK
CENTER SPEAKER
CENTER SUB
FRONT
REAR
LR
LR
SPEAKERS
REAR SPEAKER
SUBWOOFER
REAR SPEAKER
11
1
22
CENTER SUB
FRONT
REAR
LR
LR
AMLOOP
FM75‰
Manufacturedunder licence from Dolby Laboratories.
"Dolby","Pro Logic 2" and the double-D symbol are
trademarksof Dolby Laboratories. Confidential
UnpublishedWorks. ' 1992-1997 Dolby Laboratories,
Inc.All rights reserved.
SPEAKERS
AUDIO
DIGITAL AUDIO
VIDEO
VCR IN
VCR OUT
L
IN OUT
R
VCR
COAXIAL
IN OPTICAL
IN
SAT
OPTICAL
OUT
SAT
IN
SAT
IN
ME67
TV
POWERSOURCE: 230V 50Hz
RATEDINPUT POWER: 300W
SECTEUR230V 50Hz
CONSOMMATIONNOMINALE: 300VA
Shockhazard - do not open! Keep dry!
Beforeopening disconnect power plug!
Risquede choc lectrique ne pas ouvrir!
Vorffnen Netzstecker ziehen!
VorFeuchtigkeit schtzen!
Przedotwarciem obudowy wyjàç wtyczk´ z
gniazdasieciowego
Attention:
Attention:
Achtung:
UWAGA:
230V 50Hz
MON
OUT
TV
SAT/
CAB
VIDEO/
VCR ok
3
2
AM LOOP
FM 75Ω
White
GND
FRONT SPEAKER FRONT SPEAKER
SAT
OUT
AUDIO
VIDEO
OPTICAL
OUT S-VIDEO OUT
(If available)
COAXIAL
OUT