TiGHT AV EXT-H101L-HDBT User manual

User Manual
EXT-H101L-HDBT
Ultra-thin HDMI2.0 Extender
131ft/40m 4K UHD
All Rights Reserved
Version: EXT-H101L-HDBT_2019V1.0

Ultra-thin HDMI2.0 Extender
1
Statement
Read this user manual carefully before using this product. Pictures shown in this manual is for reference
only, different model and specifications are subject to real product. This manual is only for operation
instruction only, not for any maintenance usage. The functions described in this version are updated by
December 2019. In the constant effort to improve our product, we reserve the right to make functions or
parameters changes without notice or obligation. Please refer to the dealers for the latest details.
Safety Precaution
To ensure the best performance, please read all instructions carefully before using the device. Save this
manual for further reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Do not dismantle the housing or modify the module to avoid electrical shock or burn.
Using supplies or parts not meeting the products specifications may cause damage, deterioration or
malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with good ventilation.
Do not twist or pull by force ends of the cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
Unplug the power cord when not used for a long period of time.
Refer all servicing to qualified service personnel.
Customer Service
We provide limited warranty for the product within three years counting from date of purchase (The
purchase invoice shall prevail).
Package List
1 x Transmitter
1 x Receiver
4 x Mounting Ears & 4 x Screws
8 x Plastic Cushions
1 x RS232 Cable
1 x 3-pin Phoenix Connector
1 x Power Adaptor (12VDC, 2A)
1 x User Manual

Ultra-thin HDMI2.0 Extender
2
Introduction
The EXT-H101L-HDBT is an ultra-thin HDMI2.0 Extender consist of a transmitter and a receiver. It
extends 1080p/4K HDMI signal over CAT5e/CAT6a cable up to 70m /40m (PoC) and enables IR and
RS232 pass-through to control source or display device remotely. It also adapts a visually lossless video
compression technology to ensure the HD lossless transmission of HDR and 4K@60Hz/4:4:4 over
CAT5e/CAT6a cable.
Features
Supports 4K/UHD/60Hz/4:4:4.
Supports HDMI2.0 & HDCP2.2 and is backward compatible with previous versions.
Maximum transmission distance is up to 40m for 4Kx2K, and 70m for 1080p.
Supports CEC, IR and RS232 pass-through for long-distance control.
Supports bi-directional PoC for simplified wiring.
Supports HDR.
Features DIP switch for choosing mode from: Control, Update A, Update B.

Ultra-thin HDMI2.0 Extender
3
Panel Description
Transmitter
Receiver
No.
Name
Description
①
MODE Switcher
CTRL: RS232 pass-through control mode.
UPDATE A: Update Valens IC program, connect a PC to the
RS232 port, and then double-click the update file (.bat).
UPDATE B: Update compression IC program, the upgrade
method is the same as the above UPDATE A.
②
Power LED RED: DC power present.
③
HDMI IN (Transmitter)
Connect to HDMI source.
HDMI OUT(Receiver)
Connect to HDMI sink.
④
3-pin Terminal Block
If one end is connected to a control device (e.g. PC), and the other
end should be connected to the third-party device that needs to be
controlled.
⑤
IR IN
Works with far-end IR OUT port, connect to IR Receiver (with
carrier) to receive IR signal to control far-end display device from
local.
⑥
IR OUT Works with far-end IR IN port, connect to IR Emitter to send IR
signal to control input source device from remote.
⑦
HDBT
OUT(Transmitter)
Connect to the HDBT IN socket on Receiver via CAT5e/6a cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter CAT5e/6a cable.
⑧
DC Power Port Support bi-directional PoC, either ports should be connected with
12V DC 2A power adaptor.

Ultra-thin HDMI2.0 Extender
4
Specification
Model
Spec
Transmitter Receiver
Input
HDMI IN
HDBT IN
Output
HDBT OUT
HDMI OUT
Control Ports
IR IN, IR OUT, RS232
IR IN, IR OUT, RS232
General
Transmission Mode & Distance
HDBaseT; 1080p ≤ 70m; 4K×2K ≤ 40m
Resolution
Up to 4K×2K@60Hz 4:4:4
Bandwidth
18Gbps
HDMI Standard HDMI2.0 & HDCP2.2
Power Consumption
14W (max)
Operation Temperature
0 ~ +40℃
Storage Temperature
-10 ~ +50
℃
Relative Humidity
0% ~ 90%
External Power Supply
Input: 100VAC~240VAC, 50/60Hz; Output:
12VDC 2A
Dimension (W*H*D)
115mm x 16 mm x 84mm
Net Weight (g)
Transmitter: 150g; Receiver: 153g
System Diagram