Timago TGR-R SK-4H User manual

1
INSTRUCTIONS FOR USE
IV stand with wheels , 4 hangers
Product code: TGR-R SK-4H
1. Characteristics
IV stand with wheels is made of aluminium, possesses four hangers,
and plastic base with five castors with locks. Owing to simple height
adjustment it is possible to adjust the stand to the user’s individual
needs.
2. Application
The IV stand with wheels is ancillary equipment
which facilitates administration of infusion liquid.
The stand is designed to be used at home or in
hospital.
3. Assembly
Step 1. Place the plastic connector (3) into the
mounting opening in the center of the base (4).
Step 2. Insert the pole (2) into the plastic connector
(3) which was previously placed in the base (4).
Step 3. Fix lock washers (5, 6) and screw hex-head
bolt (6) from the bottom of the base (4).
Step 4. Screw the hangers (1) on the top of the pole
(2).

2
4. Technical data
Height adjustment
104-211 cm
Weight
2.56 kg
Maximum capacity of one hanger
2.5 kg
Base diameter
56 cm
Base height
13 cm
Castors
5 castors 2’’ in
diameter
5. Notes
Timago International Group does not bear responsibility of improper
use of the IV stand, failure to comply safety regulations and misuse.
6. Maintenance
•Clean the IV stand with sponge using only water and mild
detergents e.g. soap. Dry thoroughly.
•Do not use for cleaning: strong polishing detergents, abrasive
agents, bleach, petrol or solvents (it may cause frame damage,
visible defects and in consequence - loss of warranty rights).
•At least once every three months check:
-Tightening of the bolt
-The condition of pole (if cracks)
-The condition of castors
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty, the
terms of which are described in the warranty card available on our
website. Please contact the retailer from whom you purchased the
product. Please, keep in mind that for warranty purposes, the proof of
purchase (receipt or invoice) should be retained.

3
9. Labels
Reference
number
Manufacturer
LOT number Manufacture date
Serial number Medical device
Note
Please read the
instruction
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com. Thank you for choosing Timago!
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [e-mail]
Rev. II, date 20.05.2021