Timekettle WT2 Edge User manual

Translator Earbuds

Detailed Guide Book

Quick Start Guide

Earbuds：
Take earbuds out of charging case to start
Put back to shut down&charge
APP connected
Low battery (＜20%)
Charging case:
Remaining battery=1~25%
Remaining battery=75~100%
Charging to case
Charging adapter selection standard:
Standard: 5V—1A
Limit current ≥1A
Limit voltage ≤16V
Touch
area --Green flash
--White solid
--Green solid
--Red flash/solid
--1 White solid
--4 White solid
--White flash
EN-1EN-1 Hardware information

W 2 Edge works with the Timekettle APP.
Search on Google Play/APP Store or scan the QR code.timekettle
Configuration Requirements:
Bluetooth≥v5.0，IOS≥v12.0 / Android≥v7.0
Learn more at for more mobile phonewww.timekettle.co/products/wt2edge/
compatibility and earbuds connection limitation.
T
Timekettle APP Download
Download
Timekettle APP
EN-2EN-2

1.Open the APP and allow all the permissions.
2.Register and log in to the APP, fill in the basic information.
3.Select 【 】 in the device page.WT2 Edge
4.Take out the WT2 Edge of the charging case, and connect them in APP(Not
in the mobile bluetooth list).
5.Select mode (e.g. ).Simul Mode
6.Select language & accent for the left and the right earbuds.
7.Share one earbud to another person and put on one yourself.
8.Both of you can speak simultaneously and hear the translation concurrently.
Quick Start EN-3EN-3

Simul Mode : Hands-free translation mode for 1 to 1 conversation.
Touch Mode：Supporting conversation for up to 6 people.
Speaker Mode : 1 phone(APP) + 1 earbud, suitable for quick conversation.
Group Chat Mode：Remote translation for up to 40 people and 40 languages.
Learnywhere: Self language practice for spoken English & speech.
Scan the QR code for all the details.
Contact us by clicking the in-app button【 】Contact Us
for any questions.
About Modes:
Detailed Guide Book
Online update
EN-4 EN-4

EN-5
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15
EN-5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment
FCC ID: 2AQ2G-WT2EDGE