Titan Fitness AYTHDSK40 User manual

Column Number
Maximum Load
Max Speed
Input Voltage
Lowest Position
Highest Position
Duty Cyde
Applicable Temperature
Function Description
Desktop Size
2
88LBS (including 22LBS for schoolbag hooks)
06"/s
110-240V
21.7"
35.0"
length 39.4"
width 19.7"
Continuous operation for 2 mins at most after
pause for 18 mins
0~40℃
Schoolbag hook can hang schoolbags or heavy
objects weighing less than 22lbs

Note Install the feet as shown in the figure,
the long side of the feet facing inward installed
in the lifting column with the motor. The right
and left feet are facing the same direction.

Note When installing the support plate, the long
side of the support plate and the long side of the
feet must be in the same direction

Install desktop, hand switch and adapter bracket
First buckle the adapter bracket (7) into the desk frame (2) and then screw
the desk frame (2) on the desktop (1) with screws (C), fix the hand-switch
(13) with screws (14) on the desk top (1) and tighten with a pistol drill.

Push Push
First snap in the four caps(8) into the beam of the desk
frame (2) and then into the protective cover (3)

Connect the adapter
cable to the DC Port
Connect the Motor
cable to the M1 Port

Adjust the desk upwards
Adjust the desk downwards
Height Adjustable Function
Reset Function
1.Built-in sensor, the detection is more sensitive, 1 gear, when the desk encounters another object during the
movement, the anti-collision function will be triggered, then the desk will instantly stops and reverses to avoid
damage.

88lbs;
88lbs;
88lbs;