Titan Fitness HEAVY DUTY POWER RACK User manual

Owner’s
Manual
This Product is Distributed Exclusively by
Titan Distributors Inc
141 Eastley St. Ste. 113 Collierville, TN 38017
Customer Service
800 - 605 - 8241
www.tan.tness
HEAVY DUTY POWER RACK

BOX 2
Before beginning
assembly, please be
sure to match up all the
parts that you have
received with the
following parts
diagrams:
12
4
11
3
14
15 10
BOX 1
2
11
(8) Hex Bolt M16x80
(32) M16 Nut
(16) Hex Bolt M16x110
(8) Hex Bolt M16x120
1
(32) Flat Washer
(32) Spring Washer
5
9
13
8
6
7
HEAVY DUTY POWER RACK
PARTS LIST

HEAVY DUTY POWER RACK
ASSEMBLY
OVERALL NOTES: Build on a at and level surface.
Avoid ghtening bolts down completely unl the rack is fully
assembled.
STEP 1
 Lay the four UPRIGHT POLES (11) on a at surface.
 Aach the UPPER SIDE BRACINGS (1) using 16 of the HEX
BOLTS M16x110 (9), 16 FLAT WASHERS (6), 16 SPRING
WASHERS (7), and 16 HEX NUTS M16 (8).

HEAVY DUTY POWER RACK
ASSEMBLY
STEP 2
 Mount the 2” PULL-UP BAR (2) to the top of the two frames
using four HEX BOLTS M16x80 (5), four FLAT WASHERS (6),
four SPRING WASHERS (7), and four HEX NUTS M16 (8).
 Mount the 1.25” PULL-UP BAR (2) to the top of the two
frames using four HEX BOLTS M16x80 (5), four FLAT
WASHERS (6), four SPRING WASHERS (7), and four HEX
NUTS M16 (8).
NOTE: The 2” PULL-UP BAR (2) should be mounted at the back end
of the UPPER SIDE BRACINGS (1).
The 1.25” PULL-UP VAR (3) should be mounted at the front end
of the UPPER SIDE BRACINGS (1).

HEAVY DUTY POWER RACK
ASSEMBLY
STEP 3
 Mount the WEIGHT HOLDERS (12) in desired posion using
eight HEX BOLTS M16x120 (13), eight FLAT WASHERS (6),
eight SPRING WASHERS (7), and eight HEX NUTS M16 (8).
 Mount the SPOTTING BAR (10), and SPOTTING BAR SLEEVE
(15) at desired height.
 Mount the HD JHOOKS (4) in desired posion.
 Mount the BAND PEGS (14) through the boom hole of the
UPRIGHT POLES (11).
 TO MAXIMIZE STABILITY AND SAFETY, IT IS RECOMMEND-
ED THAT THIS TITAN HD POWER RACK BE BOLTED DOWN
TO A FLOOR OR PLATFORM.

HEAVY DUTY POWER RACK
SPECS
Features
 Capacity: 1,000 lbs
 HD J-Hooks w/ UHMW Liners
 2"x3" steel tubes
 (#1) pull up bar: 1 1/4"
 (#2) pull up bar: 2"
 Westside Hole Paern
Specicaons
 Weight: 230 lbs
 Height: 90"
 Inside Width: 42"
 Inside Depth: 30"
 Dimensions: (H)92" x (W)46" x (L)36"
 Material: Steel
WARNING
Exercise can present a health risk. Consult a physician before beginning any exercise
program with this equipment. If you feel faint or dizzy, immediately disconnue use
of this equipment. Serious bodily injury can occur if this equipment is not assembled
and used correctly. Serious bodily injury can occur if all instrucons are not
followed. Keep others and pets away from equipment when in use. Always make
sure all bolts and nuts are securely ghtened prior to each use. Follow all safety
instrucons in this manual.
CAUTION: Weight on this product should not exceed 1,000 lbs.