Titan Fitness TITAN Series User manual

TITAN SERIES POWER RACK
90TITAN, 100TITAN, TITAN36, TITAN42, PUB114TITAN, PUB2TITAN,
TITANFDWN36, TITANFDWN42, TRLJHOOKS, TITANSNDJHOOK,
TITANLOGOSTB, TITANSTRAP36, TITANSTRAP42
Operator’s Manual
Read the Operator’s Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!

2
SAFETY TIPS
WHEN ASSEMBLING YOUR TITAN SERIES, WE HIGHLY
RECOMMEND THAT YOU…
−ENLIST THE HELP OF A FRIEND
−WATCH EACH OTHER AND BE MINDFUL OF YOUR
SURROUNDINGS AS YOU PERFORM EACH ASSEMBLY STEP
−EXERCISE EXTREME CAUTION, ESPECIALLY WHEN STANDING
UP THE UPRIGHTS AND LIFTING PARTS OVERHEAD
−DO NOT OVEREXERT YOURSELF; TAKE BREAKS

3
PARTS DIAGRAM / EXPLODED VIEW

4
PARTS DIAGRAM / EXPLODED VIEW
KEY (BOX 1 = TITAN1)
(BOX 2 = TITAN2)
DESCRIPTION QTY
(1) 1 UPRIGHT x4
(2) 2 BASE FRAME x2
(3) 2 UPPER FRAME x2
(4) 2 LOGO PLATE x1
(5) 21.25 OR 2” PULL-UP BAR x1
(8) 2 BAND PEG x4
(16) 2 FLAT WASHER Φ26*Φ44*4 x44
(17) 2 SPRING WASHER Φ24 x20
(18) 2 NUT M24 x20
(19) 2 BOLT M24*120 x24

5
90TITAN OR 100TITAN UPRIGHTS
KEY BOX DESCRIPTION QTY
(1) 1 (X2) (2) 90” TITAN UPRIGHTS 4
(2) 1 (X2) (2) 100” TITAN UPRIGHTS 4

6
TITAN36 OR TITAN 42
KEY
BOX
DESCRIPTION
QTY
(1) 1
LOWER SIDE BRACING
2
(2) 1
UPPER SIDE BRACING
2
(3) 1
BAND PEGS
4
(4) 1
FLAT WASHER Φ26*Φ44*4
32
(5) 1
SPRING WASHER Φ24
16
(6) 1
NUT M24
16
(7) 1
HEX BOLT M24*120
16

7
ASSEMBLY INSTRUCTION – TITAN SERIES POWER RACK
1. Secure each UPPER FRAME (3) and BASE FRAME (2) between two UPRIGHTS (1)
using FLAT WASHERS Φ26*Φ44*4 (16), SPRING WASHERS Φ24 (17), NUTS M24
(18), and BOLTS M24*120 (19) as shown in the image below.

8
ASSEMBLY INSTRUCTION – TITAN SERIES POWER RACK
2. Install the LOGO PLATE (4) and PULL-UP BAR (5) between the UPRIGHTS (1)
using FLAT WASHERS Φ26*Φ44*4 (16), SPRING WASHERS Φ24 (17), NUTS M24
(18), and BOLTS M24*120 (19) as seen in the figure below.

9
PUB114TITAN OR PUB2TITAN
KEY BOX DESCRIPTION QTY
(1) 1 1.25” OR 2” PULL UP BAR 1
(2) 1 FLAT WASHER 26*44*4 8
(3) 1 SPRING WASHER 24 4
(4) 1 NUT M24 4
(5) 1 HEX BOLT M24*120 4

10
TITANLOGOSTB
KEY BOX DESCRIPTION QTY
(1) 1 LOGO FRAME 1
(2) 1 FLAT WASHER 26*44*4 8
(3) 1 SPRING WASHER 24 4
(4) 1 NUT M24 4
(5) 1 HEX BOLT M24*120 4

11
TITANSTRAP36 OR TITANSTRAP42
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 1 BRACKET SAFETY
STRAP 4 (6) 1 FLAT WASHER 17*30*3 8
(2) 1 REINFORCED SIDE
PLATE 8 (7) 1 NUT M16 4
(3) 1 REINFORCED REAR
PLATE 4 (8) 1 SCREW M16*125 4
(4) 1 SAFETY STRAP 2 (9) 1 SCREW M6*10 24

12
TITANFDWN36 OR TITANFDWN42
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 1 LEFT SAFETY ARM 1 (6) 1 PLASTIC PLATE 2
(2) 1 RIGHT SAFETY ARM 1 (7) 1 SMALL PIN Φ6*45 2
(3) 1 PIN 2 (8) 1 PULL RING Φ1.5*31 4
(4) 1 PLASTIC PLATE 2 (9) 1 CABLE Φ5.5*Φ1.6*330 2
(5) 1 PLASTIC PLATE 2 (10) 1 SCREW M6*10 18

13
TRLJHOOK
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 1 LEFT J-HOOK 1 (7) 1 FRONT PLASTIC PLATE
2
(2) 1 RIGHT J-HOOK 1 (8) 1 FLAT WASHER
2
(3) 1 LOCK PIN 2 (9) 1 NUT M12 2
(4) 1 ROLLER 2 (10) 1 HEX BOLT M12*110 2
(5) 1 SHORT PLASTIC PLATE 4 (11) 1 HEX BOLT M6*10 18
(6) 1 LONG PLASTIC PLATE 2

14
TITANSNDJHOOK
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 1 LEFT J-HOOK 1 (6) 1 REINFORCE PLATE 4
(2) 1 RIGHT J-HOOK 1 (7) 1 FLAT WASHER
Φ6.6*Φ12*1.6
12
(3) 1 SLEEVE 6 (8) 1 HEX BOLT M6*15 12
(4) 1 PLASTIC SAFETY HOOK 2 (9) 1 HEX BOLT M6*10 14
(5) 1 BACK REINFORCE
PLATE 2

15
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY
The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty
claim that might be presented for a claimed defect in material or workmanship of the product, you accept
and assume full responsibility for any and all injuries, damages (both economic and non-economic), and
losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers,
employees, officers, directors, associates, and agents from any and all claims, demands, damages,
rights of action, or causes of action, present or future, whether the same be known or unknown,
anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
This equipment must be used with care by capable and competent individuals under supervision,
WARNING
Heavy object. Use lifting aids and
proper lifting techniques when moving.
Choking hazard. Small parts –
Please exercise caution if small
children or pets are present.
Sharp objects may be involved.
Use precaution and protection.
TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES
This product comes with a one (1) year limited warranty that can be found at
www.titan.fitness/warranty.html Please review the same for all details regarding the
Titan Limited Warranty.
THE TITAN LIMITED WARRANTY FOUND AT WWW.TITAN.FITNESS/WARRANTY IS EXCLUSIVE AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, EACH OF WHICH IS HEREBY
DISCLAIMED.

16
NEED HELP? CONTACT US FIRST.
1-888-410-1503
info@titan.fitness
www.titan.fitness
© 2021 Titan Brands