Titan Fitness T-3 Squat User manual

1
MPN: T3HALF
SKU: 400409
UPC: 719318366967
Half Rack for T-3 Squat
Stand
Owner’s Manual

2
ASSEMBLY INSTRUCTION
1. Attach the Left Gusset Plate (3) to the Upright Tube (1):
Attach the Left Gusset Plate (3) to the Upright Tube (1) using M16x80 Hex Bolt (9), M16
Flat Washer (6), M16 Spring Washer (7), and M16 Hex Nut (8). The order for assembly is
M16x80 Hex Bolt (9), M16 Flat Washer (6), then push the bolt through the Left Gusset Plate
(3) and Upright Tube (1), M16 Spring Washer (7), and then place the M16 Hex Nut (8) onto
the end of the bolt. Tighten the M16 Hex Nut (8) until the M16 Spring Washer (7) is
compressed. Repeat this process for the remaining Left Gusset Plate (3) to Upright Tube
(1) attachment point.
2. Attach the Right Gusset Plate (4) to the Upright Tube (1):
Attach the Right Gusset Plate (4) to the Upright Tube (1) using M16x80 Hex Bolt (9), M16
Flat Washer (6), M16 Spring Washer (7), and M16 Hex Nut (8). The order for assembly is
M16x80 Hex Bolt (9), M16 Flat Washer (6), then push the bolt through the Right Gusset
Plate (4) and Upright Tube (1), M16 Spring Washer (7), and then place the M16 Hex Nut (8)
onto the end of the bolt. Tighten the M16 Hex Nut (8) until the M16 Spring Washer (7) is
compressed. Repeat this process for the remaining Right Gusset Plate (4) to Upright Tube
(1) attachment point.

3
3. Attach the Top Braces (2) to the Upright Tubes (1):
Attach the Top Braces (2) to the Upright Tubes (1) using M16x100 Hex Bolt (5), M16 Flat
Washer (6), M16 Spring Washer (7), and M16 Hex Nut (8). The order for assembly is
M16x100 Hex Bolt (5), M16 Flat Washer (6), then push the bolt through the Upright Tube
(1) and Top Brace (2), M16 Spring Washer (7), and then place the M16 Hex Nut (8) onto
the end of the bolt. Tighten the M16 Hex Nut (8) until the M16 Spring Washer (7) is
compressed. Repeat this process for the remaining Top Brace (2) to Upright Tube (1)
connection point, and the remaining Top Brace (2).
4. Attach the Top Braces (2) to your HD Power Squat:
Attach the Top Braces (2) to your HD Power Squat using M16x100 Hex Bolt (5), M16 Flat
Washer (6), M16 Spring Washer (7), and M16 Hex Nut (8). The order for assembly is
M16x100 Hex Bolt (5), M16 Flat Washer (6), then push the bolt through the upright of your
HD Power Squat and Top Brace (2), M16 Spring Washer (7), and then place the M16 Hex
Nut (8) onto the end of the bolt. Tighten the M16 Hex Nut (8) until the M16 Spring Washer
(7) is compressed. Repeat this process for the remaining Top Brace (2) to upright of your
HD Power Squat connection point, and the remaining Top Brace (2).
Step 3 & 4

4
PARTS DIAGRAM
Part Number
Part Description
Quantity
1
Upright Tube
2
2
Top Brace
2
3
Let Gusset Plate
1
4
Right Gusset Plate
1
5
M16x100 Hex Bolt
8
6
M16 Flat Washer
12
7
M16 Spring Washer
12
8
M16 Hex Nut
12
9
M16x80 Hex Bolt
4

5
NEED HELP?
CONTACT US FIRST
1(800)-605-8241
[email protected] / www.titan.fitness
Business hours: Monday - Friday • 8am - 5pm Central