TKN-CONNECT S38 User manual
Smart Watch User Instructions
Please check the manual before using
Version 38.0
01
Appearance
introduction
1
◎The bracelet is made of healthy materials, please be assured to use.
◎Due to individual differences, if skin feels uncomfortable while wearing, please stop wearing
and consult the doctor
HD Screen
Button
Long press to start up
/shut down,
Short press return
Infrared light
Heart rate LED light
Magnetic charging
Heart rate sensor
02
Charging
and start up
2
◎Please use the special charging cable that comes with the package, Keep charging port clear and dry.
◎Note: Do not use a power adapter with an output of more than 5V 1A to charge, otherwise the circuit
may be burned, resulting in no charging.
Please charge the product for more than two hours before use. Align the charging
port with the metal contacts on the charging base until the charging indicator
appears on the bracelet screen.
03
APP
download
3
① Scan the QR code on the right with your
mobile phone Or Go to APP Store to
download and install GloryFit,Please give
this software the corresponding permis-
sions,to ensure that the Bluetooth
connection is normal.
①Open the APP and add the bracelet device you want to
connect in the APP. When binding, please confirm that the
Bluetooth addresses displayed on the APP and the bracelet
are the same. (You can check the Bluetooth address of the
bracelet in the bracelet settings)
②When pairing, make sure that the Bluetooth of the mobile
phone is turned on, and the bracelet needs to be close to
the mobile phone to connect. After the pairing is successful,
you can check the connection status in the pull-down
notification bar of the bracelet.
04
4
Binding
05
The bracelet supports full-screen touch, slide up, slide down,
slide left, slide right, long press and other operations, slide the
screen to switch to view various functions; you can also click and
long press the screen for related operations.
The bracelet supports functions such as exercise monitoring,
heart rate monitoring, and message reminder etc.
5
Functions
introduction
06
6
①1.App can't search the device
Answer: Please try to press the device button first, if the
screen is not lit, you can connect the device to the charger to
charge, to ensure that there is power.
②The device is repeatedly connected and disconnected
Answer: Mobile phones of different brands will automatically
clean up the mobile phone background program. You need to
add the APP to the mobile phone white list or self-start
management.
③The device cannot be charged
Answer: Is there any dirt, corrosion, etc. in the charging place?
Only the full contact between the USB interface and the
charging head can charge successfully.
Common
problem
07
7
The company reserves the right to modify the contents of this manual without any notice. Some
functions are different in specific software versions, which is normal.
①Do not wear bracelets for bathing, swimming or other water activities
② Do not expose the bracelet to a place with high moisture, high
temperature or low temperature for long time
③ Can prevent such as living room, office, laboratory, light industry studio,
storage room dust conditions, not suitable for special dust environment.
④ The bracelet has crashed and restarted. Please check the phone's memory
information to clear and try again, or quit the APP and open it again.
Maintenance
08
8
Warranty card
Description
Client information
Model
Client name
Supplier Tel
Client address
Supplier address
Date Problems Diagnosis Note
Vendor （stamp）
Warranty card
