TMG TMG-LPC13 User manual

TOLL FREE: 1-877-761-2819www.tmgindustrial.com
• Please read and understand the product manual completely before assembly
• Check against the parts list to make sure all parts are received
• Wear proper safety goggles or other protective gears while in assembly
• Do not return the product to dealer. They are not equipped to handle your requests.
Missing parts or have questions on assembly?
Please call: 1-877-761-2819 or email: [email protected]
PRODUCT MANUAL
v.2023.3.24
TMG-LPC13
ALUMINUM PATIO COVER
3900mm
2950mm
10 x 13 SLIDING ROOF
'
'

!
SAFETY ADVICE
We strongly recommend the use of work gloves during assembly.
Do not attempt to assemble the Wall shed in windy or wet conditions,
Do not touch overhead power cables with the aluminum profiles.
Always wear shoes and safety goggles when working with extruded aluminum.
Dispose of all plastic bags safety-keep them out of reach of small children.
The Wall shed must be positioned and fixed on a flat level surface.
Do not lean against or push the Wall shed during construction.
Keep children away from the assemble area.
Do not position your Wall shed in an area exposed to excessive wind.
Do not attempt to assemble this Wall shed if you are tired ,have taken drugs or alcohol or
if you are prone to dizzy spells.
If using a step ladder or power tools ensure that you follow the manufactures safety advice.
Hot items such as recently used grills, blowtorches etc.must not be stores in the Wall shed.
Ensure there are no hidden pipes or cables in the ground before inserting the pegs.
GENERAL ADVICE
This is a multi-part assembly, Allow at least 90 minutes for assembly.
Selecting a site-choose a sunny level position away from overhanging trees.
If you are fixing your Wall shed directly to a solid concrete foundation use the
pre drilled holes in the metal base supplied.
The component parts should be checked and laid out close at hand.
Keep all small parts(screws etc)in a bowl so they do not get lost.
Note that the door is hinged on the right hand side and therefore opens tothe right.
Keep roof clear of snow and leaves.
CARE & MAINTENANCE
When your Wall shed needs cleaning, use a mild detergent solution and risen
with cols clean water.
Do NOT use acetone, abrasive cleaners or other special detergents to clean the
clear panels.
TOOLS & EQUIPMENT REQUIRED
Protective Equipment:
1.Helmet
2.Glove
3.Long Sleeve Cotton Overalls
4.Emergency Medicine Cabinet
5.Eye Shield
Measure (metric):
1.The Tape (5 m)
2.Angle Square
3.Level Meter
Installation Tool:
1.Triangle Stairs≈2m Height
2.Spanner 10mm (Ratchet Wrench is better)
3.Spanner 14mm (Install the expansion screw)
4.Hexagon wrench 5mm
5.Electric screwdriver+5mm Hexagon wrench
(suggest)
6.Wooden Mallet
7.Marking Pen
8.Percussion bit(8mm and 10mm)
9.Knife
10.Phillips screwdriver
Ø3
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
2/21

!
OTHER CAUTIONS
1. 3 people required, one is for measuring & taking marks to
ensure the installation dimension ,the second person is
responsible for the installation and the last one do as assistant
and assure the safety.
2. Firstly, make sure the wall is strong enough for installation. A
brick concrete structures is the best choice.
3. High-power electric tools are required, ensure the normal work
of them and highly pay attention to electric safety.
4. Be careful when using the kind of blunt tools, like hammer.
5. Wearing long sleeve cotton overalls,gloves and helmet during
installation and wear safety glasses when using power tools .
6.No up watching when working height, or the drop screws may
hurt your eyes and suffocation causing accidentally when fall into
your mouth.
7. No climbing, No standing on the tent to avoid falling down.
8. If injuries immediately, using the first-aid kit to stop bleeding,
bind up, In case of emergency， taken immediately to a nearby
medical institutions.
PRODUCT SIZE
Make sure a good installation location
390cm
295cm
218cm 233cm
272cm
299cm
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
3/21

F2 36
F5 6
F4 1
F3 44
S5 6
S3 5
S4 4
PARTS LIST
SKELETON
NO. Qty.
1 1 2870mm
2870mm
2 2
3 1
5 1
6 1
7 2
NO. Qty.
CONNECT
8 8
B1 2
B2 2
SCREW
WINDOWS
B3 2
B5 2 S2 2
B7 1 1000mm
3914mm
3914mm
3914mm
2200mm
NO. Qty.
Window A Window A
Window B
Window B
Window C Window C
WINDOW A x2
WINDOW B x2
WINDOW C x2
S1 2
Fixed screw should be purchased
according to different ground
B11 4 UP
F6 8
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
4/21

Towards the white film side to the sun as it is UV-protected.
SUMMARY STATEMENT FOR POLYCARBONATE PANEL
UV
P1x6
Install schematic diagram of Alu.frames
Window A
Window A
Window B
Window B
Window C
Window C
1
2
2
3
5
6
7
7
B1
B1
B2
B2
88
8
8
B3
B3
B5
B5
S2
S2
B7
S5
S5
S5
S5
S5
S5
B11
B11
B11
B11
S4
S4
S4
S4
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
5/21

7 x2 S1 x2
x2
Ⅱ
S1
7
7
S1
Silicon
Silicon
Silicon
x2
I
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
6/21

B2 x2 F2 x8
3
3
B2
B2
F2 F2
F2
F2
F2
F2
F2 F2
3
3
Ⅱ
Ⅰ
B2
B2
F2 F2
F2 F2
F2 F2
F2
F2
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
7/21

8 x8
2 x2
1
8
8
88
8
8
2
1
Ⅰ
x2
Ⅱ
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
8/21

Level Meter
6
F5 x6
272cm±10cm
Ⅰ
Ⅰ
Level Meter
Ⅱx6
Ⅲ
50mm
Ø8mm x6
Ⅳ
x6
F5
Ⅴ
Ø8mm
6
6
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
9/21

F2 x6
No.1 and No.2 Rely on the wall 2
1
2
2
6
6
6
6
F2
F2
F2
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
10/21

No.1 and No.2 Ping pave the ground
1
2
2
6
Window A
Window A
Window B
Window B
Window C
Window C
Ⅰ
x2
Ⅱ
x2
Window B Window B
Window A Window A
Window C Window C
21 2
Window A
Window B
Window C Ⅲx2
2
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
11/21

F3 x6
Window A
Window A
Window B
Window B
Window C
Window C
F3
F3
F3
F3
F3
F3
F3 F3
F3 F3
F3 F3
Window A
Ⅰx2
Ⅱ
Ⅰ
Ⅰ
Ⅱ
ⅡⅡ
6
6
6
6
6
2
2
1
1
2
2
Ⅱ
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
12/21

F2 x6
3
2
2
1
F2 F2
F2 F2
F2 F2
F2 3
233
3
1
2
2
F2
F2
F2 F2
F2 F2
S3
Ⅰ
ⅡⅡ
Ⅰ
Ⅰ
Ⅰ
Ⅱ
Ⅱ
Ⅱ
x5
S3x5
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
13/21

F3 x6
5
F3
F3 F3
F3 F3
5
3
1
2
2
F3
5
3
2
5
5
5
1
2
2
F3
F3 F3
F3 F3
F3 F3
Ⅰ
Ⅰ
Ⅱ
S3
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
14/21

Ⅰx6
1 People
WALL
F5
10mm
ⅡⅡ
Ⅱ
1 People
1 People
7
7
Ⅲx6
WALL
6
F5
F5
6
!
Ⅳx2
7
B2
3
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
15/21

F2 x8
Ⅰx6
WALL
Tighten the screws
!
F2x4
F2x4
7
7
3Ⅱx4
7
3
F2 F2
S4 x4
F4
F3 x2
S4
S4
S4 S4
Ⅲ
Ⅲ
Ⅳ
Ⅲx2
S4
2
C
B
F3
1
S4
B
C
F4
Ⅳ
1
F4
BB
CC
AA
S4 S4
F5
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
16/21

Ø3
F3 x12
B11 x4
UP
F3x3
F3x3
F3x3
F3x3
B11 B11
WINDOW C
WINDOW C
B11 B11 2
21
F3 B11 Window C
x2
130mm
130mm
130mm
130mm
Window C
Ø3 90
90
If the (window C) has 6 holes, you can ignore this step.
Window C
B11
B11
F3 F3 F3
F3 F3 F3
x2
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
17/21

F3 x18
B3 x2 B5 x2 S2 x2 B7
B3
B3
B5
B5
S2
S2
7
7
Ⅱx2
Ⅲx2
B3
7
B5
F3 F3
F3 F3
F3
F3
F3
7
S2
F3
F3
Ⅰx2
B7
S2
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
18/21

S5 x6
S5 S5 S5 S5 S5 S5
Ⅰ
S5
6
x6
3706
2850
7
Ⅱx2
Pls ensure and mark the distance of two
No.7 and the distance from wall.
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
19/21

B1 x2
F6 x8
F6
F6
Ⅰx2
Move No.7 and use B1 to mark the
required hole position in the middle of
the drawing
B1
Ⅱx2
B1
B1 B1
7
F2
F2 F2
F2
F6
F6
F6 F6
B1
F2 x8
Ⅲx2
Fixed screw should be purchased
according to different ground
!
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
20/21