TOGRAN TM231 User manual

PC324A User Manual
VER: 0.1
Page 1 of 7
Model NAME : Wireless Mouse
MODEL NO. : TM231
VERSION : 0.1
DATE : 2020.9.16
USER MANUAL

PC324A User Manual
VER: 0.1
Page 2 of 7
Version.
#
Revised
Date
PIC
Remark
0.1
16/9/2020
Bob
Preliminary

PC324A User Manual
VER: 0.1
Page 3 of 7
Electrical Specification
1. Operating Voltage
Mouse supply voltage: 3.7V (Lithium-ion Battery)
2. Current Consumption
Current use :< 20mA
3. Sleep Mode
3.1 Electrical Current: ＜1mA;
3.2 Wake Up: Press any button
5. Mouse Pointer Performance
5.1 Resolution：800/1200(default)/1600/2000/2400 DPI
5.2 Speed：30 inches/sec （Max）
5.3 Acceleration：10G
6. LED Indicating Functions
When the battery power is low (battery voltage reduce to <3.4V) the LED will
glisten at the frequency of 1Hz

PC324A User Manual
VER: 0.1
Page 4 of 7
7. Wireless specifications
2.403-2.480 GHz frequency coverage.
GFSK RF transceiver
High Speed RF link data rate Max. 1M bit/s
Button Functions
1. Left Button: Mouse left button standard function
2. Right Button: Mouse right button standard function
3. Middle Button: Mouse middle button standard function
4. Wheel: Mouse scroll wheel standard function
5. 4 Button: IE Forward function
6. 5 Button: IE Back function
7. DPI Button: DPI regulate function
8. Mode switch Button:change to different chanel
9. Light switch Button: change the light mode

PC324A User Manual
VER: 0.1
Page 5 of 7
Operation Process
Step 1
Open the battery cover which in the back of the Mouse.
Step 2
Place the mouse on a desk or other plane surface. The surface material isn’t metal
is better
for wireless distance.
Step 3
Insert a Transceiver in a USB port of PC. The Transceiver is pairing with the
mouse.
Step 4
Use the mouse freely.

PC324A User Manual
VER: 0.1
Page 6 of 7
Caution
Please use the Mouse in human house only and keep away water.
Don’t to fixate the light at the mouse bottom.
Children use the mouse with guardian together is necessary.
Keep dry. Humidity, liquids, contain minerals that will corrode
electronic circuits.
Don’t use or store in dusty, dirty areas.
Don’t store in hot areas. High temperature can shorten the life of electronic
devices and warp or melt certain plastics.
Don’t store in very cold areas. Moisture can form inside the case, which may
damage electronic circuit boards.
Don’t attempt to open the case. Non-expert handling of the device may
damage the system.
Avoid dropping and strong impact.

PC324A User Manual
VER: 0.1
Page 7 of 7
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.