Top Innovations SteamFast SF-434 User manual

ENGLISH
by Top Innovations, Inc.
Please read all instructions before use.
Mail in your warranty registration card.
KEEP YOUR RECEIPT FOR WARRANTY PURPOSES.
MODEL SF-434
2-in-1 Fabric Steamer & Iron

ENGLISH
2 Top Innovations, Inc.
Dear Valued Customer,
Congratulations on purchasing your new SF-434 2-in-1 Fabric Steamer & Iron. This
versatile product combines the unique benefits of a modern full-size fabric steamer with the
pressing power of a traditional iron for a total fabric care solution that enhances your fabrics
with a smooth, crisp, professionally pressed look.
Plug it in and turn it on, and in less than a minute the 2-in-1 Fabric Steamer & Iron is ready
to freshen fabrics and smooth light wrinkles. Ideal for both quick touch-ups and larger jobs,
hot steam rapidly penetrates deep into the fibers of materials, making it perfect for use on
garments, draperies, upholstery and much more. Additionally, using steam provides a variety
of other unique benefits. It’s natural and environmentally friendly, eliminating the need for
potentially harmful chemicals. It also helps to neutralize smoke and other unpleasant odors,
rather than simply covering them up with artificial scents.
In addition to the power of steam, the 2-in-1 Fabric Steamer & Iron uniquely incorporates a
heated Ironing Plate. This convenient feature lets you press fabrics directly, easily smoothing
the most stubborn deep-set wrinkles and creating crisp, professional creases in just minutes.
Top Innovations, Inc. would like to invite you to visit our Customer Support Web site at:
www.SteamFast.com
On this Web site you will find additional information about many other exciting products that
are available, helpful tips on ways in which you can utilize your 2-in-1 Fabric Steamer &
Iron, and other useful information to assist you in maximizing the power of steam!
Enjoy your new SF-434 2-in-1 Fabric Steamer & Iron!
Benny Lee
Chairman and CEO
Top Innovations, Inc.
LETTER FROM THE CEO

ENGLISH
3Top Innovations, Inc.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: This appliance has a grounded (three-prong) plug. This plug
will fit in a polarized wall outlet only one way. If the plug does not fit fully
in the outlet, contact a licensed electrician to install a proper outlet. DO
NOT attempt to modify the plug or defeat this safety feature.
To reduce the risk of fire, electrical shock, or injury, the following basic
safety precautions should always be followed when using an electrical
appliance.
READ ALL INSTRUCTIONS BEFORE USE
DANGER
Any appliance is electrically live even when switch is off. To reduce risk of death by electric shock:
1. Always unplug power cord immediately after using.
2. Do not place or store unit where it can fall or be pulled into a sink or tub.
3. Do not place in, or drop into water or other liquid.
4. If unit falls into water, immediately unplug power cord. Do not reach into the water.
WARNING
To reduce risk of burns, electrocution, fire, or injury to persons:
1. Use 2-in-1 Fabric Steamer & Iron only for its intended purpose as indicated in this manual.
2. Always place unit on a secure and level surface when in use.
3. Do not use an extension cord to operate this unit.
4. Before plugging power cord into electrical outlet, be sure that all electrical information on rating
label agrees with your power supply.
5. To reduce likelihood of circuit overload, DO NOT operate another high wattage appliance on the
same circuit as this unit.
6. To protect against risk of electric shock, do not immerse unit in water or other liquids. Do not use
power cord as handle, allow it to hang over edge of counters, or be crimped or closed in doors.
7. Always set On/Off Switch to “Off” position before plugging in or unplugging power cord. Never
yank power cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
8. Do not operate unit with a damaged power cord or if the unit has been dropped or damaged. To
avoid risk of electrical shock, do not disassemble unit; take it to a qualified service repair person
for examination and repair. Disassembly and incorrect reassembly can cause a risk of electrical
shock when unit is used, and will void manufacturer’s warranty.
9. Close supervision is required for any appliance being used near children, pets and plants. Do not
leave unit unattended while plugged in.
10. This unit is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the unit by a person responsible for their safety.

ENGLISH
4 Top Innovations, Inc.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY
IMPORTANT SAFETY INSTRUCTIONS
11. If Lighted On/Off Switch does not illuminate when set to “On” position, unit is not operating
normally. Immediately turn unit off and disconnect from power supply, then refer to
troubleshooting guide on Page 14 of this manual for assistance.
12. Always turn off unit and unplug power cord when not in use.
13. Do not use unit outdoors or operate where aerosol (spray) products are being used, or where
oxygen is being administered.
14. Unit is only meant to be used with recommended SF-434 accessories. Using other types of
attachments may cause damage to unit or injury.
15. When filling Water Tank, only distilled or de-mineralized water should be used in unit, in order
to minimize potential build-up of mineral deposits. Other cleaning agents could damage unit or
cause injury. Do not overfill unit.
16. Do not attempt to use steam without first properly filling Water Tank.
17. To reduce risk of contact with hot water emitting from steam vents, check appliance before each
use by holding Steam Nozzle away from body and pressing Steam Button. Do not operate unit
if steam vents are blocked.
18. Burns can occur from touching hot metal parts, hot water, or steam. Do not touch Ironing Plate
while unit is in use. Do not turn unit upside-down - it may contain hot water.
19. When pressing/steaming any item for the first time, it is recommended that you consult the
manufacturer’s guidelines for material being steamed. For items in question, test on an
inconspicuous area before proceeding.
20. Do not allow power cord to touch hot surfaces during use. Bundle cord inside Cord Clasp when
storing.
21. Always allow 2-in-1 Fabric Steamer & Iron to cool completely (at least 30 minutes) before
storing.
Use of this appliance for anything other than its intended purposes as specified in this
manual may result in voidance of the warranty.

ENGLISH
5Top Innovations, Inc.
PRODUCT INFORMATION
The following features and accessories are included with your 2-in-1 Fabric Steamer & Iron.
Carefully inspect Styrofoam packing material for all parts listed below. To obtain possible missing
parts, refer to the Customer Support section on Page 15 of this manual.
UNIT FEATURES &ACCESSORIES
Pole Top
Clothes Hanger Hook
Telescopic Pole
Extension Locks
Pole Base
Nozzle Station
Nozzle Holder
Cord Clasp
Water Tank
Water Tank Lid
Lighted On/Off Switch
Self-Clean Switch
Hose
Steam Nozzle
Handle
Heating Indicator Light
Steam Button
Steam-Lock Switch
Ironing Plate
Fabric/Lint Brush
Press Pad
1.
1A.
2.
2A.
2B.
3.
3A.
4.
5.
5A.
6.
7.
8.
9.
9A.
10.
11.
11A.
12.
13.
14.

ENGLISH
6 Top Innovations, Inc.
PRODUCT INFORMATION
•The Pole Top (1) connects to the top section of the Telescopic Pole. The Clothes Hanger Hook is a part of the
Pole Top.
•The Clothes Hanger Hook (1A), which is part of the Pole Top, is designed to support garments hung from a
clean rust-free hanger.
•The Telescopic Pole (2) connects to the unit at the Pole Base. The Telescopic Pole is divided into four
sections, three of which can be extended and retracted for user comfort and convenient storage. The Pole Top,
Nozzle Station and Cord Clasp all connect to the Telescopic Pole.
•The 3 Extension Locks (2A) are used to adjust the length of the Telescopic Pole.
•The Pole Base (2B), located on top of the main unit body, is the threaded receptor into which the Telescopic
Pole is inserted and secured.
•The Nozzle Station (3) connects to the Telescopic Pole. The Nozzle Holder is a part of the Nozzle Station.
•The Nozzle Holder (3A), which is part of the Nozzle Station, is designed to provide a safe, convenient place to
rest the Steam Nozzle when not in use.
•The Cord Clasp (4) connects to the Telescopic Pole and securely holds the power cord when not in use, making
the unit safer and easier to store.
•The Water Tank (5) holds water to be used by the unit for production of steam, up to a maximum capacity of
48 oz. (1,420 ml.). It can be refilled while the unit is still on for continuous-fill operation.
•The Water Tank Lid (5A) covers the Water Tank, and must be removed in order to add or empty water. The
Water Tank Lid only fits on the Water Tank correctly one way.
•The Lighted On/Off Switch (6) turns the unit on and off. When set to the “ON” position, it illuminates to
provide a clear visual indication that the unit is receiving power.
•The Self-Clean Switch (7) changes the units function from regular steaming mode to self-cleaning mode. The
Self-Clean Switch should remain set to “OFF” for normal operation.
•The Hose (8) directs water from the Water Tank to the Steam Nozzle, while remaining safe and flexible for a
variety of situations.
•The Steam Nozzle (9) is where water is heated and converted into a flow of hot steam.
•The Handle (9A) is designed to stay relatively cool while providing the optimum level of safety and user
comfort.
•The Heating Indicator Light (10) illuminates when the unit is turned on, indicating that the heater in the Steam
Nozzle is active. The Light will turn off once the Steam Nozzle and Ironing Plate are fully heated.
NOTE: During operation, the Heating Indicator Light may cycle on and off as the unit works to
maintain a steady temperature.
•The Steam Button (11) is pressed in order to start and stop the flow of steam from the Steam Nozzle. For a
continuous flow of steam, the Steam Button may either be held down manually or locked down using the
Steam-Lock Switch.
•The Steam-Lock Switch (11A) may be slid forward while the Steam Button is pressed down, in order to lock the
Steam Button in place for hands-free continuous steam.
•The Ironing Plate (12) is a heated aluminum-alloy surface, treated with a non-stick coating. The Ironing
Plate functions similarly to a conventional pressing iron, and is designed for eliminating stubborn, deep-set
wrinkles and making crisp, professional creases.
•The Fabric/Lint Brush (13) slides over the Ironing Plate. The Fabric/Lint Brush is designed to work with
steam in order to remove lint and other small particles from materials.
•The Press Pad (14) is designed to fit onto your hand, allowing you to support fabrics for a more thorough
steaming and to assist in creating creases. The Press Pad also protects your hand from being burned by hot
steam or the Ironing Plate.

ENGLISH
7Top Innovations, Inc.
ASSEMBLING THE
2-IN-1 FABRIC STEAMER & IRON
TELESCOPIC POLE
The Telescopic Pole is made up of four sections (FIGURE 1):
• TOP (SECTION 1)
• MIDDLE-TOP (SECTION 2)
• MIDDLE-BOTTOM (SECTION 3)
• BOTTOM (SECTION 4)
SECTIONS 1, 2 & 3 are adjustable in length. By using the Extension Locks, these sections may be
expanded or collapsed in order to achieve the desired length. Refer to Adjusting Telescopic Pole
section below for more details.
NOTE: SECTION 4 (BOTTOM) is the widest section of the Telescopic Pole. This section
includes the COUPLING, which secures the Telescopic Pole to the Pole Base.
CONNECTING TELESCOPIC POLE
1. Insert SECTION 4 of Telescopic Pole into Pole Base (FIGURE 2-A).
2. Tighten coupling on Telescopic Pole by turning it in a clockwise direction (FIGURE 2-B).
This will secure Telescopic Pole in place.
NOTE: To properly balance unit, align Telescopic Pole so that
clothes hanger hook on Pole Top faces towards front of steamer
(FIGURE 2-C). Nozzle Station will attach on opposite side of
Telescopic Pole (refer to Page 9 for details).
FIGURE 1
FIGURE 2
C
BA
FRONT

ENGLISH
8
ASSEMBLING THE
2-IN-1 FABRIC STEAMER & IRON
Top Innovations, Inc.
ADJUSTING TELESCOPIC POLE
In order to adjust the length of SECTIONS 1, 2 & 3 of the
Telescopic Pole:
1. Release Extension Lock directly below SECTION 1 by
swinging hinge outward as shown. The SECTION 1 above
it can then be extended / retracted (FIGURE 3).
2. Once SECTION 1 is at desired length, close hinge to
once again secure Extension Lock.
3. Repeat STEPS 1 & 2 for SECTIONS 2 & 3 of the
Telescopic Pole, using the Extension Lock directly below
each of those sections.
CONNECTING POLE TOP
NOTE: Make sure that SECTION 1 of Telescopic Pole is
extended at least 6 inches (refer to Page 7 for details).
1. Align Pole Top with end of SECTION 1. Make sure that guide
ribs inside Pole Top align with grooves on sides of SECTION 1
(FIGURE 4-A).
2. Slide Pole Top onto top of SECTION 1. Press firmly down on
Pole Top to seat it securely in place (FIGURE 4-B).
NOTE: When connecting or removing Pole Top, never
rotate it. Doing so may break guide ribs inside, preventing
Pole Top from seating firmly on Telescopic Pole. Always
slide Pole Top straight up and down.
FIGURE 4
A
B
FIGURE 3

ENGLISH
9Top Innovations, Inc.
ASSEMBLING THE
2-IN-1 FABRIC STEAMER & IRON
FIGURE 5
CONNECTING NOZZLE STATION & CORD CLASP
NOTE: These instructions assume Telescopic Pole is fully extended when attaching Nozzle
Station and Cord Clasp. Refer to Page 7 for details on adjusting the length of Telescopic Pole.
NOZZLE STATION
1. Attach Nozzle Holder to Nozzle Station:
• Align three pegs on back of Nozzle Holder with holes on Nozzle Station.
• Insert bottom peg of Nozzle Holder into lower hole on Nozzle Station.
• While squeezing in on sides of Nozzle Holder, swing top of Holder inward and insert top two
pegs into upper holes as shown (FIGURE 5-A).
2. Connect assembled Nozzle Station to Telescopic Pole, using Station’s two grips. Open clasp on
top grip, then press Nozzle Station onto SECTION 2 of Telescopic Pole (FIGURE 5-B).
NOTE: Nozzle Station will only fit correctly on SECTION 2 of Telescopic Pole. For proper
unit balance, make sure Nozzle Station faces towards rear of unit.
3. Once connected, close clasp on top grip to secure Nozzle Station to Telescopic Pole. Nozzle
Station will slide down and rest on top of SECTION 2 Extension Lock.
CORD CLASP
1. Connect Cord Clasp to SECTION 4 of Telescopic Pole, by pressing grip onto Pole (FIGURE 5-C).
NOTE: Cord Clasp will only fit correctly on SECTION 4 of Telescopic Pole. For
convenience, Cord Clasp should face towards rear of unit - this will make it easier to insert
power cord when storing.
2. To use Cord Clasp, open hinged clasp. Insert bundled power cord, then lock clasp back into
closed position.
C
BA

ENGLISH
10
USING THE
2-IN-1 FABRIC STEAMER & IRON
CONNECTING FABRIC/LINT BRUSH
The Fabric/Lint Brush is designed to work with steam to
remove lint and other loose particles from fabrics.
CAUTION: Ironing Plate becomes extremely hot during
use. In order to avoid burns or other injury, Fabric/Lint
Brush should only be connected before Ironing Plate has
heated. Do not attempt to connect Fabric Brush while unit
is emitting steam.
Do not attempt to remove Fabric/Lint Brush until Ironing
Plate has fully cooled (at least 30 minutes).
1. Slide Fabric/Lint Brush over Ironing Plate as shown
(FIGURE 6). Press it firmly on until hook on bottom
of Fabric/Lint Brush (FIGURE 6-A) catches onto tab below
Ironing Plate (FIGURE 6-B). Fabric/Lint Brush should
now be secured in place.
2. In order to remove Fabric/ Lint Brush, pull outward on hook
while simultaneously pushing upward on Fabric/Lint Brush
until hook slides over tab. Continue pulling upward on
Fabric/Lint Brush to slide it off of Ironing Plate.
NOTE: Fabric/Lint Brush must be removed in order to
use Ironing Plate to press fabrics.
FILLING UNIT WITH WATER
1. Remove Water Tank Lid from Water Tank by simply lifting it straight up; there is no lock or
release that holds it in place.
2. Using a convenient cup or water container, fill Water Tank with water. For maximum capacity
(48 oz. / 1,420 ml.), fill Water Tank completely to top. Use care so that water doesn’t overflow.
NOTE: To prolong the life of your 2-in-1 Fabric Steamer & Iron, it is highly recommended
that distilled or de-mineralized water be used - this will help to minimize mineral build-up.
3. Replace Water Tank Lid. Note that it will fit onto the Water Tank correctly only one way.
NOTE: If Water Tank runs low during operation, it can be safely refilled with water any
time - it is not necessary to turn the unit off.
NOTE: It is not necessary to empty water from Water Tank between uses - however, it is
highly recommended. Storing unit dry, then beginning each use with fresh water will help to
minimize potential mineral build-up.
Top Innovations, Inc.
FIGURE 6
B
A

ENGLISH
11Top Innovations, Inc.
USING THE
2-IN-1 FABRIC STEAMER & IRON
GENERAL STEAMING
NOTE: Be sure that Water Tank has been filled and, if desired, the Fabric Brush is connected
before following these steps.
1. For first-time use, remove protective plastic cover that is shipped on electrical plug. Plug power
cord into a convenient 3-prong electrical outlet.
CAUTION: This unit uses a grounded (3-prong) electrical plug. Use only in properly
installed 3-prong electrical outlets. Do not attempt to alter plug or circumvent this safety
feature in any way.
2. Set Lighted On/Off Switch to “ON” position, and verify that switch is illuminated. The Heating
Indicator Light will illuminate as well, indicating that heater is active.
3. After approximately 45 seconds of heating time, Heating Indicator Light will turn off. Ironing
Plate is now heated and Steam Nozzle is ready to begin producing steam.
NOTE: During use, Heating Indicator Light may cycle on and off. This is a normal effect of
the unit working to maintain a steady temperature.
4. Make sure that Self-Clean Switch is set to “OFF” position, then press and hold Steam Button.
Unit will begin pumping water from Water Tank into Steam Nozzle.
NOTE: For normal steaming, Self-Clean Switch should always be set to “OFF”. The “ON”
setting is only used when flushing mineral build-up out of Steam Nozzle. Refer to
“Self-Cleaning” section on Page 13 for details.
CAUTION: Always be sure that Steam Nozzle is pointed in a safe direction (away from
yourself, other people, pets and plants) before pressing Steam Button.
5. It will take 20-60 seconds for unit to begin producing steam, depending on length of time that unit
has been inactive. For first-time use, or if the unit has not been used for a long period of time, it
will take longer for water to be pumped through Hose. Eventually, Steam Nozzle will begin
producing a flow of steam.
NOTE: When first starting up, unit may make a loud pumping sound as air and water are
pushed through Hose. Sound will fade once air is expelled and Hose is filled with a steady
flow of water (approximately 20-30 seconds).
Pumping sound should remain inaudible during normal use, until Water Tank begins
running low. Refilling with water will eliminate the sound again.
6. If desired, Steam-Lock Switch may be used to lock Steam Button down for a hands-free flow of
continuous steam. While pressing down Steam Button, simply slide Steam-Lock Switch forward -
Steam Nozzle will continue producing steam. To unlock Steam-Lock Switch, slide it backward
while pressing down on Steam Button.
7. Proceed with your steaming / ironing tasks. For more information and tips on steaming and
ironing, refer to Page 12.
8. When you are finished using the 2-in-1 Fabric Steamer & Iron, immediately set Lighted On/Off
switch to “OFF” position and unplug power cord from electrical outlet. Refer to Care and
Storage Guidelines on Page 13 for proper cleaning and storage procedures.

ENGLISH
12 Top Innovations, Inc.
USING THE
2-IN-1 FABRIC STEAMER & IRON
STEAMING
1. Place garment on a clean, rust-free clothes hanger. Hang from clothes hanger hook located on
Pole Top.
2. Point Steam Nozzle at bottom of garment, then press and hold Steam Button (Steam-Lock Switch
may also be used - refer to Page 11 for details). Steam will rise along inside and outside of
fabric, removing wrinkles. Slowly slide Nozzle vertically, from bottom to top of garment.
NOTE: For best results, hold Steam Nozzle within 1/2 inch or directly against fabric.
3. Release Steam Button to stop steam flow, then smooth fabric with your free hand.
4. Repeat STEPS 2 & 3 as necessary until fabric is smooth and wrinkle free.
NOTE: Steaming fabric is ideal for quick touch-ups; refreshing garments, smoothing minor
wrinkles, etc. For eliminating major wrinkles or creating creases, the Ironing Plate should
be used. Refer to section below for details.
IRONING
For removing especially stubborn wrinkles and creating crisp creases, the heated Ironing Plate is
recommended. A folded towel placed on a flat heat/moisture resistant surface may be used if an
ironing board is not readily available. For ironing smaller areas (such as a shirt cuff), the included
Press Pad may be used.
NOTE: It is NOT RECOMMENDED to press on any surface, such as wood, that may be
damaged by heat and moisture.
1. If connected, remove Fabric/Lint Brush before proceeding.
CAUTION: In order to prevent burns or other injury, the Fabric/Lint Brush should only be
removed when Ironing Plate has been allowed to fully cool (at least 30 minutes).
2. If necessary, allow Ironing Plate to heat up (Heating Indicator Light will turn off when ready).
3. Place fabric on ironing board or folded towel, and press down on it with Ironing Plate. Smoothly
move Plate over entire fabric while applying pressure, as you would with a regular iron. To make
a crease, fold fabric and apply Ironing Plate. Steam Button may be pressed any time steam is
desired.
CAUTION: As with any iron, do not let the hot Ironing Plate rest in one spot on any fabric
for an extended period of time. This may result in damage to the fabric.
4. To use Press Pad, slide your hand through the velcro strap on back. The Press Pad will protect
your hand from hot steam and the Ironing Plate. While supporting fabric with the Press Pad,
press it firmly between the Ironing Plate and Pad to smooth wrinkles and create creases.

ENGLISH
13Top Innovations, Inc.
PROPER STORAGE
Preparing your 2-in-1 Fabric Steamer & Iron for storage is quick and simple. When you have
finished with your unit, follow the steps listed below.
1. Set Lighted On/Off Switch to “OFF” position. Unplug power cord from electrical outlet.
2. Remove Water Tank Lid from Water Tank, then empty any remaining water into a sink or tub.
Replace Water Tank Lid.
NOTE: It is not necessary to empty Water Tank after each use if you do not wish. However,
it is recommended that it be drained for storage and filled with fresh distilled water for each
use.
3. For storage convenience, you may wish to collapse Telescopic Pole to its most compact height
(refer to Page 8 for details).
4. Bundle power cord and secure in Cord Clasp (refer to Page 9 for details).
5. Store 2-in-1 Fabric Steamer & Iron in a cool dry location.
SELF-CLEANING
A common maintenance need for steam appliances is the removal of build-up caused by high
mineral content in many municipal water supplies. This mineral build-up may limit the
effectiveness and reduce the life of your 2-in-1 Fabric Steamer & Iron.
The best way to minimize mineral build-up is to use distilled or de-mineralized water when
using your 2-in-1 Fabric Steamer & Iron. In addition, the unit incorporates a convenient self-
cleaning feature, which uses high-pressure water to flush mineral deposits out of the Steam Nozzle.
Using distilled water in conjunction with regular self-cleaning will extend the life of your 2-in-1
Fabric Steamer & Iron, and keep it functioning at its maximum potential.
NOTE: It is recommended that the following procedure be followed once every 3-4 uses.
1. Make sure Water Tank is filled with at least 16 oz. (473 ml.) of distilled or de-mineralized water.
2. If unit is already powered on and heated, proceed to Step 3. If not, plug power cord into a
convenient electrical outlet. Set Lighted On/Off Switch to “ON” position, then wait for Heating
Indicator Light to turn off.
3. Set Self-Clean Switch on back of unit to “ON” position (for normal unit operation, it should
always be set to “OFF”).
4. Hold Steam Nozzle over a sink or tub, and press Steam Button. The Steam Nozzle will begin
emitting a powerful burst of steam. After several seconds, it will begin spraying water as well.
CAUTION: To avoid burns or other injury, use care when operating unit in self-clean mode,
as water sprayed by Steam Nozzle is hot. Be sure Steam Nozzle is pointed in a safe
direction, away from yourself, other people, pets or plants.
5. Allow unit to continue cleaning for at least 2 minutes. More time may be necessary if unit has
not been cleaned for a long period.
6. Once cleaning is complete, release Steam Button, then set Self-Clean Switch back to “OFF”
position. Follow Proper Storage procedure above.
CARE &STORAGE GUIDELINES

ENGLISH
14 Top Innovations, Inc.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE SOLUTION
Unit fails to heat up. Lighted
On/Off Switch does not
illuminate when set to “ON”
position.
Unit is not plugged in. Plug power cord into electrical
outlet.
Household circuit breaker / ground
fault interrupter has tripped or
blown a fuse.
Reset circuit breaker / ground fault
interrupter, or replace fuse. If you
need assistance, contact a licensed
electrician.
Unit fails to heat up. Lighted
On/Off Switch does illuminate
when set to “ON”.
Steam output is weak or
intermittent.
Mineral build-up in Steam Nozzle. Refer to Self-Cleaning section on
Page 13 for cleaning procedure.
Ironing Plate heats up, but unit
fails to steam.
NOTE: Always allow sufficient
time for unit to heat, and for
water to be pumped from Water
Tank to Steam Nozzle.
Unit is damaged or otherwise in
need of repair.
Immediately cease usage and
contact Customer Service for
assistance (see Page 15 for
details).
Mineral build-up in Steam Nozzle. Refer to Self-Cleaning section on
Page 13 for cleaning procedure.
Excessive amounts of water being
sprayed from Steam Nozzle.
Self-Clean Switch is set to “ON”
position.
When in self-clean mode, unit is
designed to spray water from
Steam Nozzle to flush out mineral
deposits. Make sure Self-Clean
Switch is set to “OFF” position for
normal use.
Sound is a result of pumping
system pushing air and water
through Hose.
When unit has not been used for a
long period of time, Hose will fill
with air. When Steam Button is
pushed, air must be forced out as
water is pumped in. After
approximately 20-30 seconds,
sound will begin to fade.
Pump should be inaudible by the
time unit begins producing steam.
If sound persists during use, there
may be a problem with the unit.
Immediately cease usage and
contact Customer Service.
Unit is damaged or otherwise in
need of repair.
Immediately cease usage and
contact Customer Service for
assistance (see Page 15 for
details).
Steam Button is not being pushed
and held.
Hold down Steam Button to
produce steam, or lock it down
using Steam-Lock Switch.
Unit produces loud pumping
sounds when Steam Button is
pushed.
Water Tank is low / empty. Refill Water Tank with water.
Refer to Page 10 for details.

ENGLISH
15Top Innovations, Inc.
CUSTOMER SUPPORT &
PRODUCT SPECIFICATIONS
CUSTOMER SUPPORT
For problems with your 2-in-1 Fabric Steamer & Iron, please refer to the troubleshooting
guide located on Page 14. Additional inquiries should be directed to our Customer Support
services through our Web site, www.SteamFast.com, on the Contact Us Web page.
If you do not have internet access, you may also contact our Customer Support Department by
telephone, at 1-800-711-6617 or 1-816-584-9700, ext. 130 or 131.
NOTE: In order for our customer service representatives to help you as quickly and
efficiently as possible, please have the following information ready before calling:
• Purchase information (where and when you purchased this product)
• Copy of purchase receipt / proof of purchase
• Product Serial Number
PRODUCT SERIAL NUMBER
For your convenience, space has been provided below for you to record the serial number of
your unit (located on the back or bottom of the unit) for easy reference when contacting our
Customer Service Department.
__________________ - _____________________________________
PRODUCT SPECIFICATIONS
VOLTAGE: 120V
WATTAGE: 800W
AMPERAGE: 6.5A
WATER CAPACITY: 48 OZ. (1,420 ML.)
HEATING TIME: 45 SEC. (APPROXIMATE)
CONTINUOUS STEAM TIME: 1.5 HRS. (APPROXIMATE)
UNIT WEIGHT: 12.7 LBS. (5.8 KG.)
UNIT DIMENSIONS (LxWxH): 14.0” (35.6 CM) x 9.8” (25.0 CM) x 63.0” (160.0 CM)

WARRANTY INFORMATION
Before returning any product for any reason, you MUST call or e-mail Top Innovations
Warranty Service at [phone] or [email protected] to obtain a
Return Authorization Number.
30-DAY MONEY BACK POLICY
If any item purchased directly from Top Innovations, Inc. does not meet your expectations, it may be returned
within 30 days of the date of purchase for either a replacement or full refund of the purchase price less any
shipping charges. In some circumstances, an additional restocking fee will apply.
ONE YEAR LIMITED WARRANTY
(If outside USA, additional shipping charges may apply)
Top Innovations, Inc., warrants this product to be free from defects in material and workmanship for a period of
(1) one year from the date of purchase. This warranty does not cover damage caused by misuse, negligence, use
by improper current or voltage, commercial use, use contrary to operating instructions or disassembly, repair or
alteration by any person other than Top Innovations, Inc. Warranty Service Department.
Top Innovations, Inc., will repair or replace at its option. This warranty gives you specific legal rights and may
have other rights, which may vary from state to state.
Should there be any missing or defective parts or accessories, please contact Customer Support. In most cases, it
is not necessary to return the entire unit. We can ship most replacement parts directly to your home.
Upon expiration of your One Year Limited Warranty, you will be advised of the cost of repair before any servicing
is done. You must have a Return Authorization Number before returning your product for any reason. For
non-warranty service, please enclose a check for the amount required. Or, you may pay by money order, Visa,
MasterCard, AmEx or Discover credit card.
If you need to request warranty service, or have any questions about coverage under this warranty, please visit the
Warranty Service Request page on our Web site, www.SteamFast.com. You may also email
customerser[email protected], or phone [phone] or [phone], ext 130 or 131.
Please have your product serial number ready before contacting Warranty Service Department. The serial number
is located on the back or bottom of your unit.
Performance of any obligation of this Warranty, or 30-Day Money Back Policy, may be obtained by:
1. Call [phone] for a Return Authorization Number before returning your unit. Failure to obtain a Return
Authorization Number will cause a delay in service.
2. Include a copy of purchase receipt.
3. Box the item securely, in its original packaging if available. Include original packing materials and accessories
unless advised otherwise by a Customer Service agent.
4. Include your name, address, telephone number, and Return Authorization Number on returned package.
Send unit postage/freight-prepaid (Top Innovations does not accept “collect” or COD returns) to:
Top Innovations, Inc.
Warranty Service Department
6655 Troost Ave.
Kansas City, MO 64131
Call Top Innovations, Inc., Customer Service at [phone], or [phone] if you have any questions
about the procedures described above.
ENGLISH
16 Top Innovations, Inc.

ESPAÑOL
por Top Innovations, Inc.
MODELO SF-434
Fabrica de Vapor y Plancha 2 en 1
Por favor lea todas las instrucciones antes de usarse.
Envíe por correo su tarjeta de registración de garantía.
GUARDE SU RECIBO PARA OBJECTIVOS DE GARANTÍA.

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
ADVERTENCIA: Este equipo tiene una clavija con tierra (trifásica). Esta clavija
encajará en un contacto polarizado solo de una manera. Si la clavija no encaja
totalmente en el contacto, contacte un electricista profesional para que le instale
un contacto apropiado. No intente modificar o cambiar la clavija.
Para reducir el riesgo de incendio, descarga eléctrica, o heridas, deberá seguir
siempre las siguientes medidas de precaución, cuando utilice un aparato eléctrico.
LEA TODAS LAS INSTRUCCIONES ANTES DE USAR SU
FABRICA DE VAPOR Y PLANCHA 2 EN 1.
PELIGRO
Cualquier aparato tiene corriente eléctrica aún cuando el switch este en “APAGADO”. Para reducir los riesgos
de muerte por descarga eléctrica:
1. Siempre desconecte la clavija del contacto eléctrico inmediatamente después de usar el equipo.
2. No coloque o almacene el equipo donde pueda caerse.
3. No coloque el equipo cerca del agua o cualquier otro líquido.
4. Si el equipo cae dentro del agua, desconecte inmediatamente la clavija del contacto eléctrico,
“NO INTENTE SACARLO ANTES DE DESCONECTARLO”
PRECAUCION
Para reducir los riesgos de quemaduras, incendios, descargas eléctricas o daños a personas:
1. Use su Fábrica de Vapor y Plancha 2 en 1, solo para los propósitos planteados e indicados en este instructivo.
2. Siempre coloque el equipo en una superficie segura y nivelada cuando la use.
3. No use una extensión o salida eléctrica que tengan una capacidad de electricidad inadecuada.
4. Antes de conectar la clavija en el contacto eléctrico, asegúrese que la energía suministrada sea la requerida por
el equipo.
5. Para evitar las probabilidades de una sobrecarga, No opere otro equipo de alta voltaje en el mismo contacto
que su equipo SF-434.
6. No debe sumergirlo en agua. No debe utilizar la manguera de vapor o cable eléctrico como manija. No
permitir que el cable o la manguera de vapor sean prensados por puertas o se enrosquen.
7. Siempre posicione el switch en “APAGADO” antes de conectar la clavija en el contacto eléctrico. NO
INTENTE desconectar la unidad jalando o arrastrando el cable.
8. NO UTILIZAR el equipo si el cable eléctrico o salida de corriente están dañados. NO utilizar el equipo si no
está trabajando apropiadamente o ha sido tirada, dañada, o dejada al aire libre. Si sufre daños NO trate de
desarmarla o repararla, favor de contactar a nuestro Departamento de Servicio al Cliente para servicio y
asistencia en reparación. La incorrecta reparación o rearmado puede ocasionar riesgos de incendio, descargas
eléctricas o heridas a las personas cuando usen el equipo.
9. Se requiere supervisión cercana cuando se utilice la unidad cerca de niños, mascotas y plantas. No deje su
equipo desentendido cuando este conectado, o no éste en uso.
ESPAÑOL
2 Top Innovations, Inc.

3
ESPAÑOL
Top Innovations, Inc.
¡GUARDE ESTAS INSTRUCCIONES!
PARA USO DOMÉSTICO SOLAMENTE
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
10. Si la luz del switch de Encendido/Apagado no se ilumina cuando esta en posición de Encendido y el equipo
no esta operando normalmente. Desconéctelo inmediatamente de la energía eléctrica y revise el guía de la
página 14 de este instructivo.
11. NO opere ni use el equipo cuando este usando productos de aerosol o donde se haya administrado oxigeno.
12. Este equipo solo puede ser usado con los accesorios recomendados para el SF-434. Usar otro tipo de
accesorios puede dañar su equipo.
13. Cuando llene el depósito de agua, utilice solo agua destilada o desmineralizada. Otros agentes de limpieza
dañan el equipo y pueden causarle heridas. No sobrellene el depósito de agua.
14. No intente usar el equipo sin llenar primero el tanque de agua.
15. Para reducir los riesgos de contacto con el agua caliente que emite la Fábrica de Vapor y Plancha 2 en 1,
sostenga el equipo fuertemente y verifique señales de condensación o goteo.
16. Puede ocurrir quemaduras si toca las partes metálicas, el agua caliente o el vapor. NO TOQUE la base de la
plancha cuando este usándola. No voltee el equipo al revés cuando contenga agua caliente.
17. Cuando planche o vaporice cualquier tela por primera vez, es recomendable realizarle una prueba antes de
seguir con el proceso de planchado.
18. No permita que la superficie caliente toque el cable o maguera de vapor. Permita que el equipo se enfríe
completamente (30 minutos) y siempre drene el depósito de agua antes de guardar el equipo.
El uso de esta aplicación para algo además de sus objectivos intencionados como
especificado en este manual puede causar la anulación de la garantía.

INFORMACION DEL EQUIPO
Las siguientes funciones y accesorios están incluidos en su Fábrica de Vapor y Plancha 2 en 1.
Inspeccione cuidadosamente el material empacado, así como algunas partes que son transportadas
dentro del empaque para obtener posibles partes faltantes, y en caso de faltar algún accesorio
refiérase a la sección de Apoyo al Cliente.
ARTICULOS Y ACCESORIOS DE LA UNIDAD
Tapón Superior del Tubo Telescópico
Organizador para Ganchos de Ropa
Tubo Telescópico
Seguros de Extensión del Tubo
Base de Tubo Telescopio
Base para Despachador de vapor y/o
Plancha
Sujetador del Despachador de Vapor
y/o Plancha
Sujetador de Cable Eléctrico
Depósito de Agua
Tapón de Depósito de Agua
Switch de Encendido / Apagado
Switch para Limpieza
Manguera de Vapor
Generador de Vapor y/o Pancha
Mango
Luz Indicadora de Temperatura
Botón de Vapor
Botón de Seguridad de Vapor
Superficie de Planta
Cepillo
Almohadilla
1.
1A.
2.
2A.
2B.
3.
3A.
4.
5.
5A.
6.
7.
8.
9.
9A.
10.
11.
11A.
12.
13.
14.
4 Top Innovations, Inc.
ESPAÑOL