Top R/C Hobby F4U Corsair User manual

750MM SERIES AIRPLANES
F4U CORSAIR
HURRICANE M KⅡ
P-51D MUSTANG
T-34

CONTENTS
Thank you for purchasing the remote control model airplanes from Top RC, and we hope this plane will bring endless
joy to you after you choose it.
flight and easy to control, it also can climb with wide-angel continuously;
★ EPO foam material with high crash-resistance advantage. Scale appearance and vivid flight gesture;
★ With the scale auxiliary oil tank, it makes the airplanes more scale.
★ With the detachable horizontal wing and vertical wing, which makes it easy to carry and maintain.
★ With the building block designed power system and detachable propeller, it makes the airplane easy to assemble and
convenient to maintain.
★ Optimized propeller design, it makes the propeller more beautiful and high efficiency.
★ It can finish the inverted flight, inside loops, outside loops, axial rolls and other aerobatic actions fluently. Stable
Fuselage, Main Wings, Horizontal Wing, Vertical Wing, Main Landing Gear, Propellor, Auxiliary Oil Tank,
Battery, Charger, Radio, Accessory Bag.
RTF version
Brief introduction
Product constitution
Kits without radio, charger and battery
PNP version
Without any electronic parts
KIT version
11
P-51D MUSTANG F4U CORSAIR
HURRICANE M KⅡT-34
B r i e f i n t r o d u c t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pr o d u c t s c o ns t i t u t i o n. . . .. . . .. . . . . . . . . . . . .. . . .. . . .. . . .. . . . . . . . . . . . .. . . .. . . .. . . . . . . . . . . . .. . . .. . . .. . . .. . . . . . . . .. . . .. . . .. . . .. . . . 1
M a i n s p e c i f i c a t i o n s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
M a i n c o n f i g u r a t i o n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Assemble processes(P-51D MUSTANG)...................................................................................2-3
Ass em bl e p ro c es se s( F 4 U C O R S AI R ). .. ... .. .. . .. .. ... .. .. ... .. .. . .. .. .. . .. .. ... .. .. . .. .. .. . .. .. ... .. .. ... .. .. . .. .. .. . .3 -5
Assemble processes(HURRICANEM KⅡ)...................................................................................5-6
A s s e m b l e p r o c e s s e s ( T - 3 4 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
Adjustment steps.............................................................................................................................7-8
S a f e t y p r e c a u t i o n s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
C h a r g i n g m e t h o d a n d c a u t i o n s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Caution and Notice for Li-po battery ........................................................................................................8
Caution and notice for ESC ...................................................................................................10
Spare parts(P-51D MUSTANG)..............................................................................................................10-11
Spare parts(F4U CORSAI)..............................................................................................................11-13
Spare parts(HURRICANEM KⅡ)..............................................................................................................13-14
Spare parts(T-34).................................................................................................................................14-15
Trouble Shooting..................................................................................................................................16

2
1.Assembly the landing gear.
Take of the wing &main landing gear and screws (PWA2 8mm) from the package. Assemble the landing gear into
the slot of the fuselage, please don't make it reverse. Then lock them by the screws ( ).
*
PWA2*8mm
2.Assembly of the main wings.
Take of the main wings&locking screws(KM4*45MM)from the box. Please connect the aileron servo wire, then
please assemble the main wings to the fuselage and lock it by screws(KM4*45mm).
3.Assembly of the horizontal wings.
Take of the horizontal wing&vertical wing&fixed screw(PA2*10MM) from the box. Please assemble the
horizontal wing and vertical wing as the following pictures. ,then assemble them to the right place of
the fuselage by screws(PA2*10MM) .At last, lock the main wings with fuselage.
Assemble processes(P-51D MUSTANG)
Main specifications
Main configuration
★Wingspan 750mm
★Length 648mm
★Weight 425g
★Thrust ≥450g
★Flying time ≥5min
P-51D MUSTANG T-34F4U CORSAIR HURRICANEMKⅡ
750mm
610mm
420g
≥450g
≥5min
750mm
622mm
422g
≥450g
≥5min
750mm
642mm
430g
≥450g
≥5min
★Radio system 4ch
★Motor DST-1200
★Battery 1000mAh 7.4V 15C
★ESC 12A brushless
★Servo 9gX4
4ch
DST-1300
1000mAh 7.4V 15C
12A brushless
9gX4
4ch
DST-1300
1000mAh 7.4V 15C
12A brushless
9gX4
4ch
DST-1300
1000mAh 7.4V 15C
12A brushless
9gX4
P-51D MUSTANG T-34F4U CORSAIR HURRICANEMKⅡ

3
5.Assembly of the auxiliary oil tank package.
Take of the auxiliary oil tank package, tear off the stick surface, then stick
it to the mounting groove of auxiliary oil tank on the surface of the wing.
6.Finished the assembly of
"P-51D MUSTANG".
4.Assembly of the vertical wing and
horizontal wing.
Connect the elevator servo arm with
rudder servo arm, then locate the clevis
at the outermost hole on servo arm.
Assemble processes(F4U CORSAIR)
1.Take of the main wings& main landing gear& PWA2*8MM screws from the box. Please assemble the main
landing gear into the slot under the main wings,and please do not make it reverse,then lock the main landing
gear by PWA2*8MM screw.
65-72mm
7.Check the center of gravity and make sure that the CG of the
plane should be within the range as indicated by the arrows.
2.Take of the fuselage&KM4*35MM screw
from the box and assemble the fuselage to
the right place on the main wings, please
use the screw(KM4*35MM) to lock it.
3.Assembly of the motor
Please take of the motor& propellor from the box. Connect the motor wire to the
ESC plug( black wire of the motor should be connected to black wire of the ESC,
red wire of the motor should be connected to the red wire of ESC, yellow wire
of the motor should be connected to the yellow wire of the ESC).Please assemble
the motor to the motor bracket well, then use the screw to lock it well.

4.Add some glue to the slot of the fuselage and assemble the horizontal wing to the fuselage firmly.
5.Please make sure that the tail wheel should be in the neutral position, and add some glue to the rudder
surface .Make sure the U plug should be inserted into the U slot of the fuselage, then glue the vertical
wing&horizontal wing&fuselage together.
6. Glue the vertical wing and horizontal wing, and connect the elevator steel wire.
7.Take of the guided missile&bracket set from the box, and add some glue to the bottom of the bracket, please
glue it to the slot of the main wings.
4

3.Assembly of the horizontal wings.
Take of the horizontal wing&vertical wing&screwdriver &fixed screw(PA2*10MM) from the box. Please
assemble the horizontal wing and vertical wing as the following pictures. ,then assemble them to the
right place of the fuselage by screws(PA2*10MM) .At last, lock the main wings with fuselage.
9. Finish the assembly of the “ .F4U CORSAIR”
8.Take of the auxiliary oil tank and add some glue to its surface, please glue it to the slot of the back part of the main wings.
10.Check the center of gravity and make sure that the CG of the
plane should be within the range as indicated by the arrows.
40-45mm
Assemble processes( )HURRICANE MKⅡ
1.Assembly the landing gear.
Take of the wing &main landing gear and screws (PWA2 8mm) from the
package. Assemble the landing gear into the slot of the fuselage,
please don't make it reverse. Then lock them by the screws ( ).
*
PWA2*8mm
2.Assembly of the main wings.
Take of the main wings&locking
screws(KM4*45MM)from the box.
Please connect the aileron servo
wire, then please assemble the
main wings to the fuselage and
lock it by screws(KM4*45mm).
5

5.Assembly of the auxiliary oil tank package.
Take of the auxiliary oil tank package, tear off the stick surface, then
stick it to the mounting groove of auxiliary oil tank on the surface of
wing.
7.Finished the assembly of
“Hurricane MKII”.
4.Assembly of the vertical wing and
horizontal wing.
Connect the elevator servo arm with
rudder servo arm, then locate the clevis
at the outermost hole on servo arm.
6.Assembly the antenna
Take of the antenna,then set it to the
mounting groove at the back of fuselage.
Assemble processes( )T-34
1.Assembly the landing gear.
Take of the wing &main landing gear and screws (PWA2*8mm) from the
package. Assemble the landing gear into the slot of the fuselage, please
don't make it reverse. Then lock them by the screws ( ).PWA2*8mm
2.Assembly of the main wings.
Take of the main wings&locking
screws(KM4*45MM) from the box.
Please connect the aileron servo wire,
then please assemble the main wings to
the fuselage and lock it by
screws(KM4*45mm).
3.Install the power system.
Take of the cover from the head of fuselage,then take of the assembled power system and fix the motor on the
motor base , then install the cover back.
6
8.Check the center of gravity and
make sure that the CG of the plane
should be within the range as
indicated by the arrows.
45-50mm

4.Assembly of the horizontal wings.
Take of the horizontal wing&vertical wing&fixed screw(PA2*10MM)
from the box. Please assemble the horizontal wing and vertical wing as the
following pictures. ,then assemble them to the right place of the fuselage by
screws(PA2*10MM) .At last, lock the main wings with fuselage.
5.Assembly of the vertical wing and
horizontal wing.
Connect the elevator servo arm with
rudder servo arm, then locate the clevis
at the outermost hole on servo arm.
6.Assembly of the bomb package.
Take of the bomb package, tear off the stick surface, then stick it to the
mounting groove of bomb on the surface of wing.
7.Finished the assembly of "T-34".
52-60mm
8.Check the center of gravity and make sure that the CG of the
plane should be within the range as indicated by the arrows.
1.Turn on the transmitter and please make sure that there is enough power for the transmitter. Push the joystick
of the throttle and throttle trim switch to the lowest position, and keep other trim switch be in the neutral position.
Adjustment steps
7

Adjustment steps
5.Finished the adjustment for
750MM series airplanes .“ ”
3.Please catch the back part of the fuselage
and push the throttle slowly, which can check
whether the motor can work or not.
4.Please check the collets to confirm
whether it become loose or not, and
make sure that the control surface is
in accordance with the movement of
joystick.
2.Please connect the battery to the ESC plug, and put the battery into the
battery case well, than close the battery cover.
1.If you have the simulator, we suggest that you can practise your skill by the simulator before you fly
this model, which will bring some help for you.
2.Please climb the plane above the 50 meters with half throttle to fly it when you fly it for your first time,
then you will be familiar with the performance of this plane.
3.You should learn how to control this model blandly, it will reduce the possibility of crash and prolong
the usage life of the plane.
4.The turn radius should not be too little, or it will stall and it will increase the possibility of crash.
5.When taking off or landing the plane, you should against the wind.
6.Do not fly the model over your head or behind you, you should fly the model in front of you.
Safety precautions
Specifications:
Input voltage: DC 10V~15V
Output voltage:2S-3S Li-Po battery
Charging current: 1.0A
Indicator state:
Green: Charge complete & no battery
Red: Charging
The batteries are inspected separately. When the voltage
reaches 4.20V, the charging process stops.
Charging method and cautions
Li-Po battery(balance changer) specifications
8

9
Operating
Then plug cigarette into its socket in car (Adapter should be
connected if charge at home: connect the adapter to home power
socket, then plug the adapter' DC end to charger). The LED will turn
green indicating it is ready for charging.
2.Connect the battery to charger per its interface mark. The LED becomes
red, which means charging is on the way.
3.When LED flashing, the charger will enter the stage of drip current
charging. The LED turns green when fully charged , and the battery
will be used at any time.
1.
Notice
1. While charging is in process, please do not make it near flammable materials.
2.Expect Li poly battery, this charger is not allowed for other kinds of battery.
3. While charging, please keep it out of the reach of Children.
4. When this charger is in use, please do not go away and leave it unwatched, if any abnormality occurs
(such as the power indicator is off, the temperature of the battery rise rapidly, etc. ) stop charging immediately.
5. Please do not use power with output voltage higher than 15V.
6. Please do not disassemble the charger or its accessories.
7. When the battery is not cool down, please do not urge to charge it.
Notice
1.Be fully charged under no more than 1 A voltage by using the specified charger.
2.Be discharged under 10C voltage but avoiding discharge time too long to harm the battery.
3.Repeat the first and second step one or two times.
4.When the Li-poly battery was stored more than 3 months, it needs to be recharged to maintain its voltage,
and ensure its life time.
Safety Instruction of Li-Po/Ni-MH battery
1. Do not disassemble or reconstruct the battery.
2. Do not short-circuit the battery.
3. Do not use or leave the battery nearby the fire, stove or heated place (more than 80℃).
4. Do not immerse the battery in water or sea water, do not get it wet.
5. Do not charge the battery under the blazing sunlight.
6. Do not drive a nail into the battery, strike it by hammer or tread it.
7. Do not impact or toss the battery.
8. Do not use the battery with conspicuous damage or deformation.
9. Do not charge a warm battery. Allow it to cool completely before attempting to charge.
10. Do not reverse charge or over discharge the battery.
11. Do not connect the battery to the ordinary charger socket or car cigarette jack.
12. Do not use the battery for unspecified equipment.
13. Do not touch the leaking battery directly, please wash your skin or clothes with
water if they are bedewed by liquid leaking from the battery.
14. Do not mix the Li-Poly battery with other un-chargeable battery in using.
15. Do not continue charging the battery over the prescribed time.
16. Do not put the battery into the microwave oven or high-pressure container.
17. Do not use the abnormal battery.
18. Do not use or keep the battery under the sunlight.
19. Do not use the battery nearby the place where generates static electricity (over 64V).
20. Do not charge the battery when the environmental temperature is under 0℃ or over 45℃.
21. If you find the battery leaking, smelling or abnormal, stop using it and return it to the seller.
22. When the battery is charging, please do not make it near the flammable materials!
23. Keep the battery away from the children.
24. Use the specified charger and observe charging requirement (under 1A).
25. When using by minors, parents should show them to the correct instruction.

10
No:top01602
Main wing(Blue)
No:top01603
Horizontal wing(Blue)
No:top01601
Fuselage(Blue)
No:top01604
Vertical Wing(Blue)
No:top01605
Landing Gear(Blue)
No:top01606
Cabin(Blue)
No:top01607
Spinner(Blue)
No:top01609
Main wing(Yellow)
No:top 01608
Fuselage(Yellow)
No:top01610
Horizontal wing(Yellow)
No:top01611
Vertical Wing(Yellow)
No:top01612
Landing Gear(Yellow)
Spare parts(P-51D MUSTANG)
1. The function of this ESC was in the best condition after factory setting; please do not change it by yourself.
2. Before connecting the battery, please make sure the throttle and trim were in the lowest position. If the
throttle and trim were not in the lowest position by mistake after connecting the battery, you can cut off the
battery; move the throttle and push to the lowest position, then connect the battery.
3. The ESC of the airplane was in a good cooling position after factory assembly; please do not move its position.
4. The ESC should be connected to the brushless motor correctly, otherwise the motor will be reversed turning,
and the model airplane can not fly correctly.
Notification for ESC

No:top01102
Main wings(Blue)
No:top01104
Horizontal wings(Blue)
No:top01101
Fuselage(Blue)
No:top01618
Controlling steel
No:top30204
9g Servo（Wire:150mm）
No:
7.4v,1000mah Lipo Battery
top503
No:top401
Motor(DST-1300)
No:top201
12A Brushless ESC
No:top30205
9g Servo（Wire:150mm）
No:top01617
Auxiliary Oil Tank
Spare parts(F4U CORSAIR)
No:top01613
Cabin(Yellow)
No:top01614
Spinner(Yellow)
No:top01615
Propellor
11
No: op404t
motor(DST-1200)

No:top01114
Spinner(Blue)
No:top01107
Landing Gear(Blue)
No:top01103
Vertical Wings(Blue)
No:top01106
Auxiliary Oil Tank (Blue)
No:top01105
Guided missile(Blue)
No:top01108
Fuselage(Yellow)
No:top01109
Main wings(Yellow)
No:top01111
Horizontal wings(Yellow)
No:top01110
Vertical Wings(Yellow)
No:top01115
Spinner(Yellow)
No:top01116
Auxiliary Oil Tank (Yellow)
No:top01113
Propellor(Blue)
No:top01118
Landing Gear(Yellow)
No:top01117
Guided Missile(Yellow)
No:top01119
Propellor(Yellow)
12

No:top01112
Controlling steel
Spare parts(HURRICANE M KⅡ)
No:top01302
Main wing(green)
No:top01303
Horizontal wing(green)
No:top 01301
Fuselage(green)
No:top01304
Vertical Wing(green)
No:top01305
Landing Gear(green)
No:top01307
Spinner(green)
No:top01309
Main wing(camo)
No:top 01308
Fuselage(camo)
No:top01310
Horizontal wing(camo)
No:top01311
Vertical Wing(camo)
No:top01312
Landing Gear(camo)
No:top01306
Auxiliary oil tank(green)
13

No:top01316
Controlling steel
No:top01314
Spinner(camo)
No:top01315
Propellor
No:top01313
Auxiliary oil tank (camo)
Spare parts (T-34)
No:top01502
Main wing(Blue)
No:top01503
Horizontal wing(Blue)
No:top 01501
Fuselage(Blue)
No:top01504
Vertical Wing(Blue)
No:top01507
Landing Gear(Blue)
No:top01508
Cabin(Blue)
No:top01510
Fuselage(Red)
No:top 01511
Main wing(Red)
No:top01512
Horizontal wing(Red)
14

No:top01513
Vertical Wing(Red)
No:top01505
Spinner
No:top01506
Bomb
No:top01509
Propellor
No:top01516
Landing Gear(Red)
No:top01517
Cabin(Red)
No:top01518
Controlling steel
15

16