Top CMS505 User manual

Thank you for choosing TOP VME .
CMS505
Card Reader
User Guide

Content1. Product Introduction ............................................................................................... 1
1-1. Overview............................................................................................................................ 1
1-2. Features.............................................................................................................................. 1
2. Product Specifications............................................................................................. 2
2-1. General Specifications.................................................................................................. 2
2-2. Electronic Specifications.............................................................................................. 2
2-3. Machine Specifications ................................................................................................ 2
3. Product content......................................................................................................... 2
4. Product Dimension................................................................................................... 3
5. Installation Instructions ..........................................................................................4
5-1. Board description........................................................................................................... 4
5-2. iron plate description.................................................................................................... 5
6. Application................................................................................................................... 6
7. Wiring ............................................................................................................................ 7
8. Function Description................................................................................................ 15
8-1. Setting and Display........................................................................................................ 15
8-2. Setting ................................................................................................................................ 15
8-2-1. GAME ........................................................................................................................ 16
8-2-2. Signal......................................................................................................................... 16
8-2-3. System....................................................................................................................... 16
8-3. Function Modes.............................................................................................................. 17
9. Troubleshooting ........................................................................................................ 18

1
CMS505
1. Product Introduction
1-1. Overview
The card management system can save labor costs, and reduce auditing
stress. All top-ups and cash settlements are completed at the cash
register to avoid unnecessary cash handling. This solves the problem of
miscalculation and difference between the cash and computer accounts of
other branches, and decrease the time cost of checking and reconciling.
Easy to install and use, no need for network cable connection between
devices. Information is using and transferring by the memory of the CPU.
Without the computer management, each host can work independently.
After using the system management, the accounts are clearer, the handover
is simple, it is easy to check and manage at any time, and improve the work
efficiency of the playground.
All game cards can be transferred between players, and the venue does not
need to be recovered, but can be stored, refunded and deposited.
Applicable to all: game machine, machines with the functions of opening
points, returning coins, and issuing lottery tickets.
1-2. Features
• Card Information High security
• Compatible with various game consoles
• Multiple devices can be connected in real time
★ Avaliable type for contact card(ISO 7816) & non-contact card(RFID)

2
Card Reader
2. Product Specifications
2-1. General Specifications
Communication
Interface RS232/PULSE
Card type Contact card(ISO 7816)、non-contact card
(Mifare1 S70)
Installation site Indoors
2-2. Electronic Specifications
Input power +12V DC
Power Consumption
Standby:1.5~1.6W
Working:2.3W
Max.:2.5W
Temperature Range (° C)
Ambient: 0~60
Storage:-10~80
Humidity:20~70%RH(no condensation)
2-3. Machine Specifications
Weight 229 ±12g
Dimension 133 x 92 x 75 mm
Screen Size 1.8 Inch Screen
3. Product content
Main CMS 505( non-contact card )
Accessories
Manual*1
Wires (Check page…)
Screw set
CMS100H Adapter board(Optional)
Metal Frame Sticker (Purchase)
Metal Frame (Purchase)

3
CMS505
4. Product Dimension
133.1 5.24
92.2 3.63
51 2.008
51 2.008
117.3 4.618 115.9 4.563
84.1 3.311
84.1 3.311
75.1 2.957
36.5 1.437
4 .157

4
Card Reader
5. Installation Instructions
5-1. Board description
1. Dig holes according to the recommended shape and size.
2. Put the CMS505 into the iron frame according to the direction shown in
the figure, and lock the nut.
Nuts
CMS505
Metal Frame
105.6 4.157
136 5.354
110 4.331
105.6 4.157
136.6 5.378 136.6 5.378
6 .236
孔*4
20 .787 20 .787
20 .787 20 .787
94 3.701
94 3.701

5
CMS505
3. Put the CMS505 into the board according to the direction shown in the
figure and lock the nut.
5-2. iron plate description
1. Put the CMS505 into the stud on the iron plate according to the direction
shown in the figure, and lock the nut to complete.
Nuts
CMS505
CMS505
Iron Plate
Nuts
board

6
Card Reader
6. Application

7
CMS505
7. Wiring
Connector Interface Voltage Use Wire Pag.
J2 Power +12V DC Power Cable WEL-R7U02 8
WEL-
R7U02 Power +12V DC Power Extension CU-R961-1 9
CN4 RS232/
UART Data Transfer WEL-R7U06 (Purchase) 10
CN4 USB/UART Data Transfer 2WIR-CP2102N-00
(Purchase) 11
J4 PULSE/
HOPPER Data Transfer 2WIR-CMS3000C-00 (Purchase) 12
CMS100H Power +12V DC CMS100H
Power cord
2WIR-CMS100G1-0B
(Purchase) 13
CMS100H UART/
UART
CMS100H
Data transfer
2WIR-CMS100H1-0A
(Purchase) 14
Setting Button
Dip Switch
( J2 )
WEL-R7U02 ( J4 )
2WIR-CMS300C-00
( CN4 )
WEL-R7U06
2WIR-CP2102N--00
For Software update

8
Card Reader
( J4 )
2WIR-CMS300C-00
PIN NO COLOR PIN DEFINE
PIN1 RED +12V DC
PIN2 ORANGE GND
PIN3 YELLOW NC
NC
NC
NCPIN4 GREEN
PIN5 BLUE
PIN6 PURPLE
PIN NO COLOR PIN DEFINE
PIN1 YELLOW NC
PIN2 GREEN NC
PIN5 RED +12V DC
PIN7 BLUE NC
PIN8 PURPLE NC
PIN9 ORANGE GND
WEL-R7U02

9
CMS505
CU-R961-1
PIN NO COLOR PIN DEFINE
PIN1 YELLOW NC
PIN2 GREEN NC
PIN5 RED +12V DC
PIN7 BLUE NC
PIN8 PURPLE NC
PIN9 ORANGE GND

10
Card Reader
WEL-R7U06
PIN NO PIN DEFINE
PIN2 TXD
PIN3 RXD
PIN5 GND
PIN NO COLOR PIN DEFINE
PIN1 BLUE GND
PIN6 WHITE VCC
PIN7 BLACK RXD
PIN8 PURPLE TXD

11
CMS505
4
3
2
117282WIR-CP2102N--00
PIN NO COLOR PIN DEFINE
PIN1 BLUE GND
PIN6 WHITE NC
PIN7 BLACK RXD
PIN8 PURPLE TXD
PIN NO PIN DEFINE
PIN1 GND
PIN2 USB DP
PIN3 USB DM
PIN4 USB +5V

12
Card Reader
2WIR-CMS3000C-00
1
2
3
4
6
5
7
8
9
10
11
12
PIN NO COLOR PIN DEFINE
PIN1 BLACK GND
PIN2 BROWN NOTE
PIN3 GREEN PAY+
PIN4 ORANGE TICKET_OUT
PIN5 YELLOW HOP_N
PIN6 RED +12V DC
PIN NO COLOR PIN DEFINE
PIN7 BLUE PAY-
PIN8 WHITE TICKET_IN
PIN9 PURPLE HOP_OUT
PIN10 GRAY METER_OUT
PIN11 PINK INHIBIT_IN
PIN12 WHITE/GREEN CREDIT_OUT

13
CMS505
2WIR-CMS100G1-0B
PIN NO COLOR PIN DEFINE
PIN1 BLACK GND
PIN2 RED +12 DC

2WIR-CMS100H1-0A
PIN NO COLOR PIN DEFINE
PIN1 YELLOW GND
PIN7 BLACK TXD
PIN8 RED RXD
PIN NO COLOR PIN DEFINE
PIN1 YELLOW GND
PIN7 RED RXD
PIN8 BLACK TXD

15
CMS505
8. Function Description
8-1. Setting and Display
1. ok Button : Open points, Set value confirmation, service request(press
and hold 3 second )
2. ↓ Button: Scroll down/sub
3. ↑ Button: Scroll up/add
4. Setting Button : Setting mode
8-2. Setting
Press the setting button for 1 seconds to enter the setting menu, then use
the buttons，【↑】、【↓】to select and the，【OK】button to confirm
Setting Button
↓
ok
↑

16
Card Reader
8-2-1. GAME
1. Mode : Hopper or Pulse mode
2. Play : Key in
3. Level : Signal level
8-2-2. Signal
Signal time width setting, units in ms
8-2-3. System
1. Card key : Card Key Setting
2. Version : Version Check
3. Channel : RF Channel、dBm Setting

17
CMS505
8-3. Function Modes
Mode Function Dip Switch
1 2 3 4
Mode 1
System: No Connection
Mode: RS232 (Without converter
board)
Card Reader:non-contact card
ON ON ON ON
Mode 2
System: Connected
Mode: RS232 (Without converter
board)
Card Reader:non-contact card、
contact card
ON ON ON OFF
Mode 3
System: No Connection
Mode: Hopper or Pulse (With
converter board)
Card Reader:non-contact card
ON ON OFF OFF
Mode 4
System: Connected
Mode: Hopper or Pulse (With
converter board)
Card Reader:non-contact card、
contact card
ON OFF OFF OFF
Mode 5
System: Connected
Mode: RS232 (Without converter
board)
Card Reader:non-contact card
ON OFF OFF ON
Mode 6
System: Connected
Mode: Hopper or Pulse (With
converter board)
Card Reader:non-contact card
ON OFF ON OFF
PC Setting
Mode PC Tool Tool Setting OFF OFF OFF OFF