Topcom Skyr@cer WBR 7201 N User manual

SKYR@CER WBR 7201n
WIRELESS ROUTER
Quick Installation Guide / Snelstartgids / Guide d'installation
rapide / Kurzanleitung installation / Guía de instalación rápida /
Guia de instalação rápida / Skrócona instrukcja instalacji
v 1.0

This product is in compliance with the essential requirements and other
relevant provisions of the R&TTE directive 89/336/EEC.
The Declaration of conformity can be found on:
http://www.topcom.net/support/cedeclarations.php
UK The features described in this manual are published with reservation to
modifications.
NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder
voorbehoud van wijzigingen.
FR Les possibilités décrites dans ce manuel sont publiées sous réserve de
modifications.
DE Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden
vorbehaltlich Änderungen publiziert.
ES Las características descritas en este manual pueden ser objeto de futuras
modificaciones.
PT As características descritas neste manual são publicadas sob reserva de
modificação.
PL Waciwoci opisane w niniejszej instrukcji obsugi s publikowane z
zatrzeeniem prawa wprowadzenia zmian.
SK Vlastnosti popísané v tejto príruke sú publikované s vyhradeným právom na
zmenu
UK The CE symbol indicates that the unit complies with the essential requirements of
the R&TTE directive.
NL Het toestel voldoet aan de basiseisen van de R&TTE-richtlijn. Dit wordt bevestigd
door de CE-markering.
FR La conformité de l’appareil avec les exigences fondamentales de la directive
européenne R&TTE relative aux terminaux, est confirmée par le label CE.
DE Die Übereinstimmung des Gerätes mit den grundlegenden Anforderungen der
R&TTE-Richtlinie ist durch das CE-Kennzeichen bestätigt.
ES El sello CE corrobora la conformidad del equipo con los requerimientos básicos
de la directiva R&TTE.
PT O símbolo CE indica que esta unidade cumpre com os requisitos essenciais da
directiva R&TTE.
PL Symbol CE oznacza, e urzdzenie spenia istotne wymogi dyrektywy R&TTE.
SK Symbol CE oznauje, že jednotka súhlasí s hlavnými požiadavkami R&TTE
smernice.
For use in all EU countries, Switzerland, Norway, Turkey and Russia.
For France, the output power is restricted if used outdoor and in the range 2454-2483,5 Mhz.
For Italy, depending on the usage, a general authorization may be required.

I
English ......................................................... 1
1 Connect your router................................................................................................ 1
2 Setup the Broadband Router ................................................................................. 2
3 Check the Internet Connection Status.................................................................. 9
4 Setup the Wireless Network................................................................................. 10
4.1 WPS............................................................................................................................... 10
4.2 Setup the (E)SSID......................................................................................................... 10
4.3 Set the wireless Encryption ........................................................................................ 11
5 Warranty................................................................................................................. 13
5.1 Warranty period............................................................................................................ 13
5.2 Warranty handling........................................................................................................ 13
5.3 Warranty exclusions.................................................................................................... 13
6 Disposal of the device (environment) ................................................................. 13
7 Cleaning................................................................................................................. 14
Nederlands................................................. 15
1 Uw router aansluiten............................................................................................. 15
2 De breedbandrouter instellen .............................................................................. 16
3 Controleer de status van de internetverbinding. ............................................... 23
4 Het draadloos netwerk instellen.......................................................................... 24
4.1 WPS............................................................................................................................... 24
4.2 (E)SSID instellen .......................................................................................................... 25
4.3 De draadloze encryptie instellen ................................................................................ 25
5 Garantie.................................................................................................................. 27
5.1 Garantietermijn............................................................................................................. 27
5.2 Afwikkeling van garantieclaims.................................................................................. 27
5.3 Garantiebeperkingen ................................................................................................... 27
6 Afvoeren van het toestel (milieu)......................................................................... 28
7 Reinigen................................................................................................................. 28
Français...................................................... 29
1 Connexion de votre routeur................................................................................. 29
2 Configuration du routeur large bande ................................................................ 30
3 Contrôle de l'état de la connexion Internet ........................................................ 37
4 Configuration du réseau sans fil ......................................................................... 39
4.1 WPS............................................................................................................................... 39
4.2 Configurer le (E)SSID................................................................................................... 39
4.3 Définir le cryptage de la liaison sans fil..................................................................... 40
5 Garantie.................................................................................................................. 41
5.1 Période de garantie...................................................................................................... 41
5.2 Mise en uvre de la garantie ....................................................................................... 42
5.3 Exclusions de garantie ................................................................................................ 42
6 Mise au rebut de l'appareil (environnement)...................................................... 42
7 Nettoyage............................................................................................................... 42

II
Deutsch ...................................................... 43
1 Anschluss Ihres Routers...................................................................................... 43
2 Konfiguration des Breitband-Routers................................................................. 44
3 Prüfen des Internetverbindungsstatus ............................................................... 51
4 Konfiguration des drahtlosen Netzwerks ........................................................... 52
4.1 WPS............................................................................................................................... 52
4.2 Konfigurieren der (E)SSID........................................................................................... 53
4.3 Einstellen der drahtlosen Verschlüsselung .............................................................. 54
5 Garantie.................................................................................................................. 55
5.1 Garantiezeit................................................................................................................... 55
5.2 Abwicklung des Garantiefalls..................................................................................... 55
5.3 Garantieausschlüsse................................................................................................... 56
6 Entsorgung des Geräts (Umweltschutz)............................................................. 56
7 Reinigung............................................................................................................... 56
Espaol ...................................................... 57
1 Conexión del router .............................................................................................. 57
2 Configuración del router de banda ancha.......................................................... 58
3 Comprobación del estado de la conexión a Internet......................................... 65
4 Configuración de la red inalámbrica................................................................... 66
4.1 WPS............................................................................................................................... 66
4.2 Configuración del (E)SSID .......................................................................................... 67
4.3 Configuración del cifrado inalámbrico ...................................................................... 67
5 Garantía.................................................................................................................. 69
5.1 Período de garantía...................................................................................................... 69
5.2 Tratamiento de la garantía .......................................................................................... 69
5.3 Limitaciones de la garantía......................................................................................... 69
6 Eliminación del dispositivo (medio ambiente)................................................... 70
7 Limpieza................................................................................................................. 70
Portugus................................................... 71
1 Ligue o router........................................................................................................ 71
2 Configure o Router de Banda Larga ................................................................... 72
3 Verifique o estado da ligaço  Internet.............................................................. 79
4 Configure o Router Wireless................................................................................ 80
4.1 WPS............................................................................................................................... 80
4.2 Configure o (E)SSID..................................................................................................... 81
4.3 Configure a Encriptaço da rede wireless................................................................. 81
5 Garantia.................................................................................................................. 83
5.1 Período de garantia...................................................................................................... 83
5.2 Accionamento da garantia .......................................................................................... 83
5.3 Excluses de garantia ................................................................................................. 83
6 Eliminaço do dispositivo (ambiente)................................................................. 84
7 Limpeza.................................................................................................................. 84

III
Polski.......................................................... 85
1 Podczenie routera.............................................................................................. 85
2 Konfiguracja szerokopasmowego routera ......................................................... 86
3 Sprawd status poczenia z internetem ............................................................ 93
4 Konfiguracja sieci bezprzewodowej.................................................................... 94
4.1 WPS............................................................................................................................... 94
4.2 Konfiguracja (E)SSID ................................................................................................... 94
4.3 Wczanie szyfrowania komunikacji bezprzewodowej............................................. 95
5 Gwarancja.............................................................................................................. 96
5.1 Okres gwarancji ........................................................................................................... 96
5.2 Obsuga gwarancji ....................................................................................................... 97
5.3 Wyjtki od gwarancji.................................................................................................... 97
6 Usuwanie urzdzenia (rodowisko) .................................................................... 97
7 Czyszczenie........................................................................................................... 97
Slovensky................................................... 98
1 Pripojte svoj router ............................................................................................... 98
2 Nastavenie pre širokopásmový Broadband Router........................................... 99
3 Skontrolujte Štatút internetového pripojenia................................................... 106
4 Nastavenie Bezdrôtovej siete ............................................................................ 107
4.1 WPS............................................................................................................................. 107
4.2 Nastavenie (E)SSID.................................................................................................... 107
4.3 Nastavte bezdrôtové Kódovanie............................................................................... 108
5 Záruka .................................................................................................................. 109
5.1 Záruná doba.............................................................................................................. 109
5.2 Manipulácia so zárukou............................................................................................. 110
5.3 Odopretie záruky........................................................................................................ 110
6 Likvidácia zariadenia (životné prostredie)........................................................ 110
7 istenie ................................................................................................................ 110

ENGLISH
1
Connect your router
English
1 Connect your router
Please connect your router according to the diagram below.
•POWER: The power port is to connect the 12V DC power adapter.
JThe power LED on the front panel will go ON when the power adapter is connected.
•WAN: The WAN port is to connect your Cable/DSL modem. The link LED in the front
panel will indicate that the ADSL line is connected.
JThe WAN LED will go ON if the network Ethernet cable is properly connected.
•Ports 1- 4: This is to connect up to 4 pc's or other network devices.
JThe LAN LED's will indicate the connection status.
•Reset/WPS Button:
JTo load default settings, press the reset button and hold it for at least 20 seconds. It
will load the factory default settings for the device. Do not press the reset button
unless you want to clear the current settings.
JTo start the WPS (Wi-Fi Protected Setup), press the key for about 4 seconds.

2
Setup the Broadband Router
2 Setup the Broadband Router
It is strongly recommended to configure your router by use of a wired connection. So,
please connect your computer to one of the Ethernet ports of the router by use of an
Ethernet cable.
JOpen the Internet Explorer and type 192.168.1.1 in the URL Address bar.
- Internet Explorer URL Address bar -
Now the login screen will appear.
JEnter the username and password.
- Login screen -
By default the username is admin and the password is admin.
JClick OK to proceed.
Now you enter the web management of your Wireless Router
- Wireless Router Web management page -

ENGLISH
3
Setup the Broadband Router
JChoose Quick Setup Wizard to start the configuration.
JIn the next screen you can set the Time Zone.
- Time Zone settings -
1Set Time Zone: Please select your region.
2Time Server Address: You can enter the IP address of your preferred
Time Server or you can leave the default setting.
3Daylight Savings: Here you can Enable the Daylight Savings. Please
enter the start and end date of the Daylight Savings.
JClick Next to proceed.
- Broadband connection type -
JNow choose your Broadband Connection Type:

4
Setup the Broadband Router
oCable modem: Used for cable modem connections.
- IP Address info for Cable Modem -
1Host Name: Enter your Host Name if necessary.
2MAC Address: Some Cable Internet Providers will keep the Mac
address of your computer in their server. In this case you should clone
the Mac address of your computer.
JClick Clone Mac Address to copy your computers Mac address into
the router.
JClick OK to proceed.
oFixed-IP xDSL: Used for cable modem or DSL bridge with fixed IP address.
- IP Address info for Fixed-IP xDSL -
1IP Address assigned by your Service Provider: Please enter the fixed
WAN IP address.
2Subnet Mask: Enter the Subnet Mask.
3DNS Address : Enter the DNS address.
4Service Provider Gateway Address: Enter the Gateway IP address.
JClick OK to proceed.

ENGLISH
5
Setup the Broadband Router
oPPPoE xDSL: Used for DSL bridge with PPPoE connection.
- IP Address info for PPPoE xDSL -
1Username: Enter your PPPoE username.
2Password: Enter your password.
3Service Name: Enter the service name (for example the name of your
Internet Provider).
4MTU: Enter the MTU size. (If the size is not specified by your Internet
Provider, please leave the default value at 1492.)
5Connection type:
•Continuous: The PPP-connection will always be active.
•Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will
disconnect when there is no more Internet traffic during the Idle
Time (minutes), entered in the field below.
•Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
JClick OK to proceed.

6
Setup the Broadband Router
oPPTP xDSL: used for cable modem or DSL bridge with PPTP connection. PPTP
can also be used when the router is connected to another LAN network.
- IP Address info for PPTP xDSL -
•WAN connection: DHCP client or Fixed IP address
•Obtain an IP address automatically:
1Host Name: Enter your Host Name if necessary.
2MAC Address: Some Cable Internet Providers will keep the MAC
address of your computer in their server. In this case you should clone
the Mac address of your computer. Click Clone Mac Address to copy
your computers Mac address into the router.
•Use the following IP address:
1IP address: Please enter the fixed IP address.
2Subnet Mask: Enter the Subnet mask.
3Default Gateway: Enter the Gateway IP address.
•PPTP Settings:
1User ID: Enter the PPTP username.
2Password: Enter the PPTP password.
3PPTP Gateway: Enter the Gateway.

ENGLISH
7
Setup the Broadband Router
4Connection ID: Enter the Connection ID when necessary.
5MTU: Enter the MTU size. (If the size is not specified, please leave the
default value at 1492.)
6BEZEQ-ISRAEL: Only for Israel.
7Connection Type:
•Continuous: The PPP-connection will always be active.
•Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will
disconnect when there is no more Internet traffic during the Idle
Time (minutes), entered in the field below.
•Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
JClick OK to proceed.
oL2TP xDSL: Used for cable modems with L2TP connection.
- IP Address info for L2TP xDSL -
•WAN connection: DHCP client or Fixed IP address
•Obtain an IP address automatically:
1Host Name: Enter your Host Name if necessary.
2MAC Address: Some Cable Internet Providers will keep the MAC
address of your computer in their server. In this case you should clone
the Mac address of your computer. Click Clone Mac Address to copy
your computers Mac address into the router.

8
Setup the Broadband Router
•Use the following IP address:
1IP address: Please enter the fixed IP address.
2Subnet Mask: Enter the Subnet mask.
3Default Gateway: Enter the Gateway IP address.
•L2TP Settings:
1User ID: Enter the L2TP username.
2Password: Enter the L2TP password.
3L2TP Gateway: Enter the Gateway.
4Connection ID: Enter the Connection ID when necessary.
5MTU: Enter the MTU size. (If the size is not specified, please leave the
default value at 1492.)
6Connection Type:
•Continuous: The PPP-connection will always be active.
•Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will
disconnect when there is no more Internet traffic during the Idle
Time (minutes), entered in the field below.
•Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
JClick OK to proceed.
oTelstra Big Pond: not for Europe.
Now the quick setup wizard is finished.
JClick Apply to finish.
The router will reboot now. This will take about 60 seconds.
JClick OK when the reboot sequence is done.

ENGLISH
9
Check the Internet Connection Status
Return to the home page by clicking HOME in the right top of the screen.
3 Check the Internet Connection Status
The WAN connection can be checked in the Status Info screen on the router Web page.
Now click Internet Connection.
- Internet Connection Status -
JAll information about the Internet connection will be visible: WAN IP address,
Gateway, DNS servers, ..

10
Setup the Wireless Network
4 Setup the Wireless Network
4.1 WPS
The Skyr@cer WBR 7201n supports the Wi-Fi Protected Setup (WPS) feature.
The WPS can send the wireless encryption settings from the router automatically to the
WPS-enabled wireless client (for example Skyr@cer USB 4201n).
This means that you don't need to enter the encryption settings in your WPS-enabled
wireless adapter if you want to connect to your router. Just press the WPS key from the
router, then press the WPS key on the wireless adapter and the secured connection will
be established after a few seconds.
For the automatic WPS setup you don't need to go through sections 4.2 and 4.3 below.
4.2 Setup the (E)SSID
JClick General Setup and go to Wireless > Basic Settings
- Wireless Settings page -
1Choose the wireless Mode: Access Point (AP) is default.
If you don't setup the router wireless encryption settings, the WPS will
automatically create a very sophisticated encryption key (WPA-PSK) for you.
If you want to use non-WPS Wireless client adapter it is recommended to setup
the wireless encryption manually.
>>

ENGLISH
11
Setup the Wireless Network
2Enter the Wireless Network name (ESSID). By default it will be
“Topcom_” + six last digits of the MAC address.
3There are 13 available radio channels. You are free to select one of
these channels.
JClick Apply to confirm.
4.3 Set the wireless Encryption
Three encryption settings are available: WEP 64bit, WEP 128bit and WPA(2).
JChoose Security Settings to access the encryption menu.
By default the encryption is disabled. In this screen you can select your type of
encryption.
You can find the MAC address at the bottom label of the router.
If you have more than one wireless router or access point in your
home or office, make sure not to use the same channel.
Topcom strongly recommends to enable encryption. This is the only way to
prevent that unwanted users access your wireless network.

12
Setup the Wireless Network
In the example below 64-bit WEP Encryption is set.
- Security Settings page -
1Encryption: Choose WEP
2Key Length: 64-bit. Now enter your WEP key: You are free to invent a
code (for example 12345abcde). Please make sure to use the same key
in your wireless adapter installed in your Wireless computer or laptop.
Please write down this key and hide it from unauthorised users.
3For 64-bit encryption 10 hexadecimal digits should be entered.
For 128-bit encryption 26 hexadecimal digits should be entered.
JClick SAVE to save the settings.
JClick Apply to confirm.
Following characters are valid to be as hexadecimal:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
a, b, c, d, e, f
A, B, C, D, E, F

ENGLISH
13
Warranty
5 Warranty
5.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the
day the new unit is purchased. The warranty on batteries is limited to 6 months after
purchase. Consumables or defects causing a negligible effect on operation or value of
the equipment are not covered.
The warranty has to be proven by presentation of the original purchase receipt, on which
the date of purchase and the unit-model are indicated.
5.2 Warranty handling
A faulty unit needs to be returned to a Topcom service centre including a valid purchase
note.
If the unit develops a fault during the warranty period, Topcom or its officially appointed
service centre will repair any defects caused by material or manufacturing faults free of
charge.
Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging
the faulty units or parts of the faulty units. In case of replacement, colour and model can
be different from the original purchased unit.
The initial purchase date shall determine the start of the warranty period. The warranty
period is not extended if the unit is exchanged or repaired by Topcom or its appointed
service centres.
5.3 Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting
from use of non-original parts or accessories not recommended by Topcom are not
covered by the warranty.
Topcom cordless phones are designed to work with rechargeable batteries only. The
damage caused by the use of non-rechargeable batteries is not covered under warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water
and fire, nor any damage caused during transportation.
No warranty can be claimed if the serial number on the units has been changed, removed
or rendered illegible.
Any warranty claims will be invalid if the unit has been repaired, altered or modified by the
buyer or by unqualified, non-officially appointed Topcom service centres.
6 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the
normal household garbage but bring the product to a collection point for the
recycling of electrical and electronic equipments. The symbol on the product,
user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling
point. By re-using some parts or raw materials from used products you make an important
contribution to the protection of the environment. Please contact your local authorities in
case you need more information on the collection points in your area.

14
Cleaning
7 Cleaning
Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use
cleaning agents or abrasive solvents.