Topmodel CZ super fun 1.3E User manual

GB
GB GB
GB -
--
- USA
USAUSA
USA Parts list
Part # Part name Material, dimensions Loose In bag
building instruction 01 -
1A fuselage front part fibreglass 01 -
1B
fuselage tube
fibreglass
01
-
1
-
1
motor mount
fibreglass
-
01
1-2 servo tray plywood 4 mm - 01
1-3 air hole cover ABS - 01
2
wing
balsa assembly
0
1
-
2-2 wing fixing screw screw M 4 x 16 mm - 02
2-21 centering pin dowel ∅4 x 40 mm - 01
2-3 nut Al M4 - 02
2
-
31
nut mount
plywood 3 x 20 x 35 mm
-
01
3 horizontal stabilazer balsa 01 -
3-5 link bowden ∅2 mm L=630mm,
piano wire ∅0,8 mm L= 720mm 01+01 -
3
-
6
threaded coupler
MPJ 2012
-
01
3-7 clevis MPJ 2110 - 01
3-8 horn fibreglass plate 1 mm - 01
4
vertical tail
balsa
01
-
4A
vertical tail mount
plywood 4 mm
-
01
4-5 vertical tail link bowden ∅2 mm L=630mm,
piano wire ∅0,8 mm L= 720mm 01+01 -
4-6 threaded coupler MPJ 2012 - 01
4
-
7
clevis
MPJ 2110
-
01
4-8 horn fibreglass plate 1 mm - 01
6 canopy fibreglass 01 -
6-1 canopy fixing wood screw ∅2,9x6,5 mm - 01
7
stickers
04
RECOMMENDED RC EQUIPMENT:: xxxxxxx
Radio : 3 channel + 3 channel (receiver)
Servos : 2x micro (9-10g)
Motor : MIG AC 400/14
Controller: >12A
Spinner: ø 30 mm
Battery: LiPo 2-3S, 1,5 – 2Ah
ATTENTION!
This modelconstruction kit is not a toy and is not suitable for childern under the
age of 14.
Incorrect use of this model could cause material damage or personal injury. You
are fully responsible for your actions when you use this model.
Fly at a safe distance from occupied zones. efore switching on the radio, be
sure, that no one else is using the same frequency as you !
efore first take-off check up please the center of gravity, the sense and size of
the control surface angle and if model aeroplane parts aren´t crooked. The
reparation is possible through the use of hot-air dryer.