Toro Groundsmaster 3280-D User manual

FormNo.3369-385RevA
RegistrationPlateKit
Groundsmaster®3280-DTractionUnit
ModelNo.120-7572
InstallationInstructions
Safety
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Installation
Note:TheGroundsmaster3280-DTractionUnitmustbe
equippedwiththeLightKit,Model30405tooperatethe
RegistrationPlateKitLight.
1.Positionthemachineonalevelsurface,stoptheengine,
removetheignitionkey,andengagetheparkingbrake.
CAUTION
Ifyouleavethekeyintheignitionswitch,
someonecouldaccidentlystarttheengineand
seriouslyinjureyouorotherbystanders.
Removethekeyfromtheignitionswitch
beforeyoudoanymaintenance.
2.Centeringtheregistrationplatebackingbracketonthe
rearofthehood,useitasatemplatetolocate,mark,
anddrill(2)8mm(5/16inch)diameterholesthrough
thehood(Figure1).
1
G023935
Figure1
1.Backingbracket
3.Mounttheplatelighttotheregistrationplatebracket
with(2)#10x7/8inchscrewsand#10locknuts
(Figure2).Donotovertighten.Makesurethatthelens
pointsdownwardandthewiresareinsertedthrough
theholeintheplatemount.
©2013—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3369-385*A

12 3
7
6
5 4
G023934
Figure2
1.Registrationplatebracket5.Backingbracket
2.Flange-headscrew,5/16
x3/4inch
6.Platelight
3.Nut,#107.Screw,#10x7/8inch
4.Flangenut,5/16inch
4.Mounttheregistrationlightplateassemblytotherear
ofthehoodwith(2)5/16x3/4inchange-head
screws,5/16inchangenuts,andthebackingbracket
(Figure2).
5.Locatethebundleofwiresecuredtotheexistinglight
kitwireharness.
6.Routetheharnesstotheplatelight,andplugthebullet
connectorsintothelight.
Important:Makesurethatthewiresareclearof
allhot,sharp,ormovingcomponents.
7.Checktheoperationoftheregistrationplatelight.The
platelightshouldilluminatewhenthelightsareturned
ONandthekeyisintheRUNposition.
2