Torque XARM-4-14 User manual

VERSION: XARM-4-14
4 X 14 ARMAMENT ASSEMBLY GUIDE
PART #: 5737301-A

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
TOOLS NEEDED FOR ASSEMBLY:
3/8" ALLEN WRENCH •
3/4" WRENCH OR SOCKET •
RATCHET •
RUBBER MALLET •
LADDER •
Torque Fitness
11201 Xeon Street NW Ste 101
Coon Rapids, MN USA 55448
www.torquefitness.com
Toll free: 1-877-TORQUE5 (1-866-664-9894)
or 763-754-7533 (8:30 am – 5:00 CST).
For sales: [email protected]
For service: [email protected]
ITEM PART NUMBER DESCRIPTION QTY
1 5463201 WLDMT, CROSS SUPPORT 2
2 56338PA PTD ASSY, LEFT BASE 2
3 54804PA PTD ASSY, WEIGHT STORAGE UPRIGHT 2
4 5634001 WLDMT, RIGHT BASE 2
5 5516001 WLDMT, ACCESSORY STORAGE UPRIGHT 2
6 2005817 BOLT, 1/2-13 X 4-1/2" (114mm) SOCKET HEAD 16
7 2007801 WASHER, 1/2 X 1-3/4 X 4.5t 112
8 2001401 NUT, 1/2-13 LK ST ZN 56
9 55899PA PTD ASSY, 8' UPRIGHT 4
10 55077PA PTD ASSY, 9' UPRIGHT 4
11 2005816 BOLT, 1/2-13 X 4-1/4" (108mm) SOCKET HEAD 20
12 5481301 WLDMT, 4' MULTI-GRIP CROSS 2
13 5443501 WLDMT, 6' SINGLE CROSS 1
14 5480101 WLDMT, UPPER SUPPORT 4
15 5473101 PLATE, STORAGE HOOK CONNECTOR 8
16 2005813 BOLT, 1/2-13 X 3-1/2" (89mm) SOCKET HEAD 20
17 55862PA PTD ASSY, 6' HOR. WEIGHT STORAGE 1
18 5484001 PTD ASSY, 6' ACCESSORY TRAY 2
19 54737PA PTD ASSY, LEFT BAR SUPPORT 2
20 54742PA PTD ASSY, RIGHT BAR SUPPORT 2
2

2
4
3
5
3
STEP 1

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
3
5
2
4
6
7
8
1
4
NOTE:
LOOSELY assemble bolt connections in this step.
STEP 2

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
NOTE:
Assemble uprights
with slots facing
each other (2)
NOTE:
Assemble uprights
with slots facing
each other (2)
2
4
11
7
8
910
5
NOTE:
LOOSELY assemble bolt connections in this step.
STEP 3

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
2
4
910
11
7
8
6
STEP 4
NOTE:
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
NOTE:
Shown in assembled position.
NOTE:
Assemble crosses to 2nd
and 4th holes on uprights
NOTE:
Shown in assembled position.
12 13
6
7
8
9 10
7
STEP 5
NOTE:
LOOSELY assemble bolt connections in this step.

14
53
8
STEP 6

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
14
5
3
15
7
16
8
9
NOTE:
LOOSELY assemble bolt connections in this step.
STEP 7

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
14
11
7
8
9 10
10
STEP 8
NOTE:
LOOSELY assemble bolt connections in this step.

50 180
3
190150 170160
6
130 14012090 110100403010 706020 80
1 2 4 5 7
200
NOTE:
Shown in assembled position.
NOTE:
Shown in assembled position.
5
16
7
8
18
17
11
STEP 9
NOTE:
After this step has been completed, SECURELY tighten all bolt
connections from this step and previous steps.
Some items have been hidden for assembly clarity.

19
20910
To remove Bar Supports from
upright, pull spring pin out to
unlock, lift up and pull out.
Insert Bar Supports into desired
slots on the upright and allow it
to drop down to lock in place.
12
STEP 10

ANCHOR HOLE (4)
ANCHOR HOLE (4)
24
13
STEP 11
NOTES:
SECURELY anchor the machine to the floor using the anchor holes provided.
Consult a professional contractor for the actual anchoring of the machine.