Toshiba Satellite 2800 SERIES Operator's manual

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2800 Series
BATTERY PACK REMOVAL OPTIONAL PCMCIA CARD REMOVAL
SJ
HDD REMOVAL
1. Lift the HDD assembly out of the HDD bay
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2800 Series
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2800 Series
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2800 Series
LCD^FL cable
i. Disconnect the
-LCD/FL cable
-LED/Button c
-IPS switch cable from PJ 10
-Speaker cable from PJ16
4. Remove four M25x6 black screws and two M2x8 b
screws securing the to pcover.
CD-ROM/DVD ROM DRIVE REMOVAL
CD-ROM(DVD-ROMdi
Slide the CDDVD-ROM drive assembly to the right to
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2800 Series
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2800 Series
SUB WOOFER REMOVAL
^ll BL£
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2800 Series
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite'
2800 Series
LED/BUTTON BOARD REMOVAL
LED/Buttcn l...;.j|.
emove seven M2x4 screws and one M2x8 s<
*.:uiin.:ith*LED/Button boards.
lid*- th* LED.-Button board to the left and lift it i
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite"
2800 Series
13.3 TFT DISPLAY MASK REMOVAL FL INVERTER AND LCD REMOVAL
r»fiask M25*5
'Wt^Sf
3. There'are23l,i
LCD cable FL inverter M2x5 brass FL in-
I. Remove one M2x5 brass screw securing
FL inverter board.
J. ijiefullv lift up the FL invert ei heard and
disconnect the FL inverter cable from CN1 and
the FL cable from CN2.
3. Remove four M2.5X5 brass screws securing the
LCD module
4. Carefully rotate the LCD module from right to left
of the LCD cover.
?. Di-=.: Alined the LCD cable from the LCD module and
remove the LCD from the computer.
TOSHIBA
Tough Enough for Today's World

FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite'
2800 Series
14.1 TFT DISPLAY MASK REMOVAL FL INVERTERAND LCD REMOVAL
fcnask M2.5x5
LCD cable FL inverter M2x5 brass FL in-
I. Remove one M2x5 brass screw securing
FL inverter board.
J. ijiefullv lift uf the FL invert ei heard and
disconnect the FL inverter cable from CN1 and
the FL cable from CN2.
3. Remove four M2.5X5 brass screws securing the
LCD module
4. Carefully rotate the LCD module from right to left
of the LCD cover.
o. Disconnect the LCD cable from the LCD module and
remove the LCD from the computer.
TOSHIBA
Tough Enough for Today's World