Toshiba 58UL2B63DB User manual

58UL2B63DB
QUICK START GUIDE
Please visit www.toshiba-tv.com to download the full user manual.

English - 1 -
1Building and tting stand
x 2
x 4
2Inserting the batteries into the remote
Remove the back cover to reveal the battery compartment. Insert two size AAA batteries. Make sure the (+)
and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with same or
equivalent type. Place the cover back on. A message will be displayed on the screen when the batteries are
low and must be replaced.
In order to prevent injury and maintain
stability of this TV, secure it to a wall(or to
another immovable structure), as shown
in the illustration, using a sturdy strap and
the P clips. Make sure the strap is secure


English - 2 -
3Connections
Antenna
Connect the antenna cable/s to your TV.
satellite
dish
aerial /
cable TV

External Devices
PLEASE ENSURE BOTH UNITS ARE
SWITCHED OFF BEFORE CONNECTING
Use the proper cable to connect two units together.
To select the desired input source, press the Source
button on the remote control. Or press the control
button to display the function options menu and then
press the button consecutively to move the focus to
Source option. Press and hold the button for about 2
seconds to activate this option. The icon colour of the
option changes when activated. Then press the button
once again to display the Sources list. Scroll through
the available sources by pressing the button.
HDMI connection
rear of TV
Power
After unpacking, allow the TV set to reach the ambient room temperature before you
connect the set to the mains. Plug the power cable to the mains socket outlet.
󰀨
socket on.
IMPORTANT: The TV set is designed to operate on a 220-240V AC, 50 Hz supply.
Switching on the TV
4
In order to turn the TV on from standby mode:
Press the Standby button, a numeric button or
Programme +/- button on the remote control
Press the control button on the TV
Internet connection
5
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired
or wireless connection.
Wired Wireless
wireless
modem/router
Note: The gures are for representation only

English - 3 -
Remote control
6
1. Standby
2. Source
3. Numeric buttons
4. Language
5. Menu
6. Volume +/-
7. Info
8. Directional buttons
9. OK
10. Back/Return
11. Coloured Buttons
12. Prime Video
13. Rewind
14. Record
15. Pause
16. Play
17. Stop
18. Fast Forward
19. 
20. Freeview Play
21. Exit
22. Guide
23. Programme +/-
24. Text
25. Mute
First time installation
7

OK. Follow the on screen instructions to set your TV and install channels. The installation wizard will guide
you through the setup process. You can perform First Time Installation anytime using the related option in
the Settings>Installation menu.
Accessing E-Manual and the full user manual
8

Settings menu, select Manuals and press OK. For quick access to E-Manual press
Menu “ ” button and then Info “ ” button.
You can also review your TV user manual online or download as you like. Scan this QR
code or visit https://toshiba-tv.com
If you like to register your Toshiba TV, please visit the Toshiba support website as per link above and select
“Register”.