Toshiba 34HF85 User manual

÷
÷
Dear CuBtomer_
Thank you for purchasing this Toshiba TV This manual wfli
heip you use the many exciting features of your new TV.
Before operating the TV, please read this manual
completely, and keep it nearby for future reference.
Safety Precautions
WARNUNG
TO REDUCE THE RmSKOF FmREOR ELECTRmCSHOCK,
DO NOT EXPOSE THINSAPPUANCE TO BAroNOR
MOmSTUBE.
WARNmNG
The Eightning symbol in the triangle tens you that the
voltage inside this product may be strong enough to
caase an electric shock. DO NOTTRY TO SERWCE
THIS PRODUCTYOURSELF,
The exclamation mark in the triangle tens yea that
important operating and maintenance instructions
follow this symbol
CAUTUON
TO PREVENT ELECTBmC SHOCK DO NOT USE THINS
POLARmZEDPLUG WroTHAN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN HEFULLY INSERTED TO PREVENT
BLADE EXPOSURE.
NOTETO CATVUNSTALLERS
This is a reminder tocall the CATVsystem instdbr's
attention to Article 820-40 of the NEC,which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical. Foradditional antenna grounding information,
see items 25 and 26 on page 4.
NOTUCEOFPOSSUBLEADVERSEEFFECTS
ONTVPUCTURETUBE
If a fixed (non-moving} pattern remains on the TV
screen for long periods of time, the image can become
permanently ingrained in the picture tube. This type of
damage isNOT COVERED BY YOUR WARRANTY.
See item 33 on page 4.
ENERGY SITAR_ qualified TV, Products that earn
the ENERGY STAR prevent green house gas
emissions by meeting strict energy efficiency
guidelines set by the U,S. Environmental
Protection Agency and the U,S. Department of
Energy. ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks.
ENERGYSTAR
NEVER CONNECT THiS TV TO APERSONAL
COMPUTER(PC.}This TVis not intendedfor use
with a PC. 0303
2
It MakesADifference
WhereYourTVStands
Congratumations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
The issue
IJ Ifyouare Iikemostconsumers,you havea TVin yourhome.
Manyhomes,in fact,havemorethanoneT_,L
IJ Thehometheaterentertainmentexperienceisa growing
trend,and IargerTVsarepopularpurchases;however,they
arenotaiwayssupportedon theproperTVstands.
IJ SometimesTVsare improperlysecuredor inappropriately
situatedon dressers,bookcases,sheIves,desks,audio
speakers,chests,or carts.Asa result,TVsmayfallover,
causingunnecessaryinjury.
Toshiba Cares!
E3Theconsumerelectronicsindustry
iscommittedto makinghome
entertainmentenioyabbandsafe.
I_ TheConsumerEbctronics
Associationformedthe Home
EntertainmentSupportSafety
Committee,comprisedofTVand
consumerebctronicsfurniture
manufacturers,toadvocate
children'ssafetyandeducate
consumersandtheirfamiliesabout
televisionsafety.
Tune Into Safety
IJ OnesizedoesNOTfit ail!Useappropriate
furniture largeenoughto supporttheweightofyour
TV[andotherebctronb components}.
IJ Useappropriateangb braces,straps,andanchorsto secure
yourfurnituretothe wall{butneverscrewanythingdirectly
intotheTV}.
IJ Carefullyreadand understandtheotherenclosed
instructionsforproperuseof this product.
IJ Donotallowchildrento climb onor playwith furniture
andTYs.
@ AvoidpIacinganyitemontop ofyourTV(suchasa VCR,
remotecontrol,ortoy} thata curiouschiIdmayreachfor.
C3Rememberthat childrencan becomeexcitedwhilewatching
a programand canpotentiaflypushor puIIa TVover.
C3Shareour safetymessageaboutthis hiddenhazardofthe
home with your family and friends. Thank you!
2500 Wibon Blvd,
Arlington, VA 22201 U.S,A,
Tel.[phone] Fax[phone]
www,OE,org
CEAis theSponsor Prodocerand
Maoagerof theIniermJtionalCE_'
÷
J3U00121A(E) P02-06 2 _ 10/03/2005, 6:14 AM

÷
÷
mmpoAant Safety instructions
2} Keep these instructions ....
4} Follow all instructions.
5) Do not use this apparatus near
water,
6}
7}
Clean only with a dry cloth°
Do not block any ventilation
openings. Install in accordance with
the manufacturer's instructions.
8] Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus 0nciuding amplifiers}
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third Wideplug
prong are provided for your safety.
If the provided plug does not fit into
your outbt, consult an electrician
for replacement of the obsobte outtet.
10} Protect the power cord from being
walked on or pinched, particularly at
pIugs, convenience receptacles, and
the point where it exits the apparatus.
11} Only use attachments/accessories specified by the
manufacturer.
12) Use onmywith the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
lightnin 9 storms or when _,_ [_1
unused for long periods __--
of time.
14) Refer aH servicing to quamified service personnel
Servicing is required when the apparatus has been -_
damaged in any way, such as power supply _
cord or plug is damaged, liquid has I_"_
been spilled or objects have fallen into II _'_, _l _;_!"/
the apparatus, the apparatus has been _ _==a_
exposed to rain or moisture, does not __:_
operate normalIy, or has been dropped._
A
15) CAUTmON: To reduce the risk of electric shock, do
not use the polarized plug with an extension cord,
receptacle, or other outlet unless the biades can
be inserted completely to prevent blade exposure.
hlstallation, Care, arid Service
mnstallation
Foilow these recommendations and precautions and heed all
warnings when instailing your TV:
16) Never modify this equipment. Changes or modifications
may void: a} the warranty, and b} the user's authority' to
operate this equipment under the roles of the Federal
Communications Commission.
W} DANGER: RiSK OF SERIOUS PERSONAL
raNJURY, DEATH, OR EQUmP_,_ENT
DANIAGE. _Never place the TV on
an unstable cart, stand, or table. The TV
may fail, causing serious personal injury,
death, or sedous damage to the TV=
@!iiii@_i!_i5iiii_ _¸_" I_£8T
Never place or store the TV in direct
sunlight; hot, humid areas; areas S::;_ii: ....
subject to excessive dust or vibration; _........ _
or locations with temperatures at or
below 41°F (5°C}. ....
19) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
20] Never place items such as vases,
aquariums, or candles on top of the TV
21} Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
• on a bed, sofa, rag, or similar
surface;
otoo ctose to drapes, curtains,
or walls; or
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
i_ _ _-_.
22} Never allow anything to rest on or rolI over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
23} Never overload wall outlets and
extension cords.
0303
3
÷
J3U00121A(E) P02-06 3 _ 10/03/2005, 6:14 AM

÷
÷
24}A waysoperateth,sequ,pmentfrom
a120VAC,6OHzpowersourceonly
25] AJways make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code}.
///Antelma leadqrtwire
Antelmadischarge unit
f (NECSection 810-20)
Electric serviceequipment
Grotuldhlg conductors
(NECSection 810-21)
26] /_ DANGER: R_SK OF SERmOUS PERSONA[,
/| \ raNJURY OR DEATH!
_° Use extreme care to make sure you are never m
a position where your body (or any item you are in contact
with, such as a ladder or screwdrive0 can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
• Never attempt to install any of the following dunng
lightning activity:
a] an antenna system; or b} cables, wires, or any home
theater component connected to an antenna or phone
system.
m
Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
27} Always sit approximately 10-25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
28} Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
29} WARNmNG: RmSK OF E[,ECTR_CSHOCK!
Neverspillliquidsorpushobjects ofanykind
into the TVcabinet slots.
30] [This item applies to pr@;ection TVs only) If the air
temperature rises suddenly (for example, when the TV is
first delivered}, condensation may form on the lenses. This
can make the picture appear distorted or the color appear
faded. If this happens, turn off the TV for 6 to 7 hours to
allow the condensation to evaporate.
31] For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
32] During normal use, the TV may make _
occasionaI snapping or popping _t_i_-_
sounds. This is normal, especiaIIy <_ XJ
when the unit is being turned on or _:_@
off. If these sounds become fred
or continuous, unpiug the power cord _*
and contact a Toshiba Authorized Service Center.
33} Possibme Adverse Effects on TV Picture Tube: if a fixed
(non-moving) pattern remains on the TV screen for iong
periods of time, the image can become permanently
ingrained in the picture tube and cause subtle but
permanent ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave your TV
on for long periods of time while it is displaying the
following formats or images:
, Fixed images, such as PiP/POP windows, stock tickers,
video game patterns, TV station Iogos, closed captions,
and websites.
• Speeiam Formats that do not use the entire screen. For
exampJe, viewing Jetterbox styJe (16:9} media on a
normal (4:3] display (gray bars at top and bottom of
screen}; or viewing normaJ style (4:3] media on a
widescreen (16:9] dispJay (gray bars on left and right
sides of screen}.
Service
s4} WARNING:ruSKoFE[,ECTmC
/_\ SHOCK. I Never attempt to service _Le _?
TV yourself. Opening and _-"]r_r/_
removingthecoversmayexposeI125 !1R"W
you to dangerous voltage or other _
hazards. Refer alI servicing to a __ED_
Toshiba Authorized Service Center.
35] If you have the TV serviced:
• Ask the service technician to use only repIacement parts
• Upon completion of service, ask -_ g':_:'
the service technician to perform
routine safety checks to determ,ne f___.__, _/_. 1)
that the TV is in safe operating
condition.
0303
4
36} When the TV reaches the end of its useful life, ask a
quaiified service technician to properly dispose of the TV.
Improper disposai may result in a picture tube implosion
and possible personal injury.
÷
J3U00121A(E) P02-06 4 _ 10/03/2005, 6:15 AM

÷
÷ ÷
5
J3U00121A(E) P02-06 5 _ 10/03/2005, 6:15 AM

÷
Welcome to Toshiba
Congratulations! You have purchased one of the finest co!or TVs on the
market. The goal of this manual is to guide you through setting up and
operating your Toshiba TV as quickly as possible.
You may need to purchase other audio or video cables to connect your
equipment. See "Connecting your TV" on page 7 for more information.
Please read alI the safety and operating instructions carefully before
you begin.
Exploring your new TV
You can operate your TV by using the buttons on the front panel or the
remote control. The front and back panels provide all the inputs you will
need to connect other equipment to your TV.
i he STARTING SETUP feature appears
the first time you turn on the TV. See page
21 for details.
÷
TV front panem
Remote sensor
Power indicator
POWER ChannelV/A VolurneY/A
Audio(L/R)/Video In
S-vk_
TV back panem ÷
Semecting a mocation for the TV
o Place the TV on the floor or on a sturdy platform in a location where
light does not directly hit the screen.
o Place the TV far enough from the walls to allow proper ventilation.
inadequate ventilation may cause overheating, which may damage
the TV.
6
J3U00121A(E) P02-06 6 _ 15/03/2005, 2:06 AM

÷
÷
Connecting your TV
, A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cabies use "F" connectors.
, Standard A/V (audio/video) cabies are usually color coded accord-
ing to use: yellow for video and red and white for audio. The red
audio cabte is for the stereo right channel, and the white audio
cable is for the stereo Ieft (or mono) channel. Hfyou look at the rear
paneI of the TV, you will see that the terminais are color coded in
the same manner as the cables.
, S-video cables provide better picture performance than standard
video cables. S-video cables can oniy be used with S-video
compatible components.
, Component video cables provide better picture performance than
S-video cables. Component video cabies can only be used with
component video compatible components.
, HDMH(High Definition Multimedia hterface) cable is for use with
video equipment that has HDMHoutput (see page 14).
S-Video
ANTENNA Cable
Coaxial Cable
@ @
Component video
Cables
VIDEO
Cable
HDMI
Cable
Connecting a VCR
This connection ailows you to watch local channels and video programs,
play or record on the VCR while watching TV, and record from one
channel while watching another channel.
/
TV
Cable Leadqn
from cable box
or antenna Stereo VCR
NEVER CONNECT THIS TV TO A
PERSONAL COMPUTER (PC).
This TV is not intended for use
with a PC,
NOTICE: RiSK OF
EQUIPMENT DA MA GEl
Do not plug in any power cords
until you have finished connecting
all equipment.
You will need:
+ two coaxial cables
+ one set of standard A/V cables
Note:
If using a mono VCR, connect L/b!ono to
VCR Audio OUT using only one audio cable.
For better picture quafity, if your VCR has S-
video, you can use an S-video came instead
of the standard video cable. Do not connect a
standard video cable and an S-video cable to
WDEO-1 (or WDEO-2) simuttaneouslt/
The unauthorized recording, use, distri-
bution or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of
the United States and other countries,
and may subject you to civil and criminal
liability+
÷
7
J3U00121A(E) P07-15 7 + 10/03/2005, 6:15 AM

÷
÷
Connecting a cabJe converter box or Antenna
This television has an extended tuning range and can tune most cable
channels without using a cable company supplied converter box. Some
cable companies offer "premium pay channels" in which the signal is
scrambled. Descrambling these signals for normat viewing requires the
use of a descrambler device, which is generally provided by the cable
company.
Option 1 : For Subscribers to Basic CabJe TV Service
For basic cabJeservice not requiring a Converter/Descrambier box,
connect the incoming 75 ohm Coaxial Cable directly to the Antenna
Jack on the back of the television.
Option 2 : For Subscribers to ScrambJed CabJe TV Service
Ifyou subscribe to a cable service that requires the use of a Converter/
DescrambIer box, connect the incoming cable to the Converter/
DescrambIer box and connect the output of the box to the Antenna
Jack on the back of the television. Fol!ow the connections shown
below. Set the television to the output of the Converter/DescrambIer
box (usually channel 3 or 4) and use the Converter/DescrambJer box to
select channeJs.
Option 3 : For Subscribers to Unscrambled Basic Cable
with Scrambled Premium ChanneJs
Ifyou subscribe to a cable service in which basic cable channels are
unscrambIed and premium channels require the use of a Converter/
DescrambIer box, you may wish to use a two-set signal splitter (some-
times calIed a "two-set coupler') and an A/B Switch box from the cable
installer or an electronics supply store. Follow the connections shown
below. With the switch in the "B" position, you can directly tune any
nonscrambIed channels on your TV. With the switch in the "A" position,
tune your TV to the output of the ConverteriDescrambIer box (usually
channel 3 or 4) and use the box to tune scrambled channels.
Note:
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control such as
labeling channels, blocking channels, and
programming your favorite channeb.
÷
From Cable
Option 1:
c::::::_ m
Option 2:
========tConverter/Descrambler _ m
r-i=l C°nverter/Descrambler h
Option 3_,,_" -,,J,,_
'_ ==_ Splitter A/B Switch _ =_
_I HD-1 HOe
HDMI
NIII
mlNn
VIDEO_I VI[3EOr2
8-VID 0
@©
®v,i:®
@!o@
AUDIO
TV
_OUTm _ANT_
(75:)
I VIOE{)
r nl
I VARAUDIO
i i
8
J3U00121A(E) P07-15 8 _ 10/03/2005, 6:16 AM

÷
÷
Connecting a DVD pmayer/sateHite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the satellite receiver and TV, as well as
record one TV channel while watching another channel.
From satellite
TV
From antenna
Stereo VOR
You will need:
three coaxial cables
two sets of standard A/V cables
•one S-video cable
one pair of standard audio cables
Note:
You can use a standard video cable instead of
the S-video cab/e, but the picture quafity witf
decrease. If you use an S-video cable
between the TV and DVD player/satellite
receiver, make the audio connections but
remove the standard video cable. Do not
connect both an S-video and a standard
video cable to WDE01 (or VIDE02) at the
same time or the picture performance wit/be
unacceptable.
The unauthorized recording, use, distri-
bution or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of
the United States and other countries,
and may subject you to civil and criminal
liability.
÷
9
J3U00121A(E) P07-15 9 _ 10/03/2005, 6:16 AM

÷
÷
Connecting a DVD player with ColorStream ®
(component video) and a VCR
This connection allows you to watch DVD, VCR, or TV programs and
record TV programs, You can record from one source whiIe watching a
program from another source, Your TV is capable of using ColorStream
(component video,) Connecting your TV to a component video compat-
ible DVD player, such as a Toshiba DVD player with ColorStream ®,can
greatly enhance picture quaIity and performance,
DVD pJayer with Component video
TV
i- ms
i
From antenna
Stereo VCR
OUT
You will need:
•two coaxial cables
•one set of standard A/V cables
•one set of component video cables
•one pair of standard audio cables
Note:
You can connect the component video cables
to either set of Co/orStream jacks on the TV
(HD- 1or HD-2,)
T,_e CotorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlaced (480L 1080i) scan systems, A
1080i signal wifi provide the best picture
performance,
The unauthorized recording, use, distri-
bution or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of
the United States and other countries,
and may subiect you to civil and criminal
liability,
÷
I0
J3U00121A(E) P07-15 10 _ 10/03/2005, 6:16 AM

÷
÷
Connecting a DTV receiver /set4op box with
ComorStream ®(component video) and a VCR
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has ColorStream +_(component video) inputs. Connecting your
TV to a DTV receiver with component video can greatly enhance
picture quality and realism.
From Antenna
Stereo VCR
From DTV
Antenna
COLO£ COLOR
STREAM STREAM
You will need:
,, three coaxial cables
,, two sets of standard A/V cables
,, one set of standard audio cables
,, one set of component video cables
Note:
You can connect the component video cables
to either set of CotorStream jacks on the TV
(HD- 1 or HD-2.) For HDMt connection see
page 14.
The CotorStream HD-1 and HD-2 jacks and
HDMt jacks can be us ed with Progressive
(480p, 720p) and Interlaced (480L 1080i)
scan systems. A 1080i signal wilt provide the
best picture performance.
ffyour DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to VIDE01 (or WDE02) at the same time or
the picture performance wit/be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subiect you to
civil and criminal liability.
÷
DTV Receiver
with Component video
11
J3U00121A(E) P07-15 11 _ 10/03/2005, 6:17 AM

÷
÷
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR=
You will also be able to record from one TV channel while watching
another channel=
From antenna
l
TV
/
You will need:
• two coaxial cables
• two sets of standard A/V cables
Note:
Do not connect the same VCR to the output
and input jacks on the TV at the same time,
For better picture qua/it]4 if your VCR has S-
video, you can use an S-video cable instead
of the standard video cable, Do not connect a
standard video cable and an S-video cable to
VIDEO-1 (or VIDEO-2) simultaneously:
The unauthorized recording, use, distribu-
tion or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liabMty=
÷
J3U00121A(E) P07-15 12 _ 10/03/2005, 6:17 AM

÷
Connecting acamcorder
This connection allows you to watch videos recorded on a camcorder=
S=VHSCarncorder
You will need:
• one S-video cable
• one pair of standard audio cables
Note:
For better picture quafity, if your camcorder
has S-video, you can use an S-video cable
(plus the standard audio cables) instead of a
standard video cable,
Do not connect both a standard video cable
and an S-video cable at the same time, or the
picture performance wilt be unacceptable,
÷ ÷
13
J3U00121A(E) P07-15 13 _ 10/03/2005, 6:17 AM

÷
÷
Connecting an HDMF Mor aDVmdevice to the HDMm input
The HDMI I_]input on your TV receives digital audio and [1] HDMt =High-Definition Multimedia Interface.
uncompressed digital video from an HDMI device or [2] DVI =Digital Video Interface.
uncompressed digital video from a DVl L2]device.
This input is designed to accept HDCP E3iprogram material
in digital form from EIA/CEA-861/861 B-compliant I41
consumer electronic devices (such as a set-top box or
DVD player with HDMI or DVl output.)
The HDMI input is designed for best performance with high
definition video signals. It wilI accept and display 480i,
480p, 720p and 1080i signals.
[3] HDCP =High-bandwidth Digital Content Protection.
[4] EfA/CEA-861/861B compliance covers the
transmission of uncompressed digitat video with high-
bandwidth digital content protection, which is being
standardized for reception of high-definition video
signals. Because this is an evoiving technology, it
is possible that some devices may not operate
properly with the TV.
NEVER CONNECT THIS TV TO A PERSONAL
COMPUTER (PC.} This TV is not intended for
use with a PC,
To connect an NDMI device, you win need:
,, one HDMI cable (type A connector)
For proper operation, it is recommended t/tat you use
as short an HDMt cable as possible. You should not
encounter difficulty ffyou use an HDM/ cable that is
shorter than 16.4 ft (5m.)
HDM/ cable transfers both video and audio. Separate
analog audio cables are not required (see illustration
below)
You must set the HDMI audio input setting to
"HDMI'" in the AUDIO menu (see page 40.)
Some CDVs (Video CDs) may not output digital audio
s_gna/s.In that case, you may hear sound by connecti,_,,g
analog audio cables. Ifyou do use analog audio cables for
this reason, you wii/ need to set the HDMi audio input
setting to "DV/" to hear the analog audio (see page 40.)
Note: tf you connect an HDMt device and analog audio
cables and play media with digital audio output, to hear
digital audio you must set the HDMI audio input setting
to "HDMI" (page 40.)
HDMmdevice
TV
¥ mlNm
HDMI
7-....
Li
AUbl0
HD.I MD-2
@v@
AUDIO
@!@
mlNm
VIDEO-1 VI_)EO-2
do
@,@
AUDIO
@ ;,@
To ensure that the HDMI or DV/ device is reset
properly, it is recommended that you follow these
procedures:
° When turning on your electronic components, turn
on the TV firsL and then the HDMI or DV/ device.
, When turning offyour electronic components, turn
off the HDMI or DVi device first, and then the T_X
To connect a DV8device, you win need:
,, one HDMI-to-DVI adapter cabIe
(HDMI type A connector)
For proper operation, the length of an HDMt-to-DVI
adapter cable should not exceed 9.8 ft (3m.) The
recommended length is 6.6 ft (2m.)
,, one pair of standard analog audio cables
An HDMf-to-DV/ adapter cable transfers only video.
Separate analog audio cables are required (see
illustration below.)
You must set the HDMt audio input setting to
"DVr' in the AUDIO menu (see page 40.)
DVI device
VIDEO AUDIO
LR
TV
÷
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC= 1 4
J3U00121A(E) P07-15 14 _ 10/03/2005, 6:18 AM

÷
Connecting an audio system
This cennection allows you to use an audio amplifier and external
speakers, and adjust the audio Ievel using the TV's remote control
To control the audio, turn on the TV and the stereo amplifier, and turn
off the TV's built-in speakers (see "Turning off the built-in speakers" on
page 40.)
Note:
Tohear sound when using an external audio amplifier, the volume of
both the TV and the ampfifier must be set above 0 (zero,)
For example, if tbe volume of the TV is set to O,you will not be able to
hear any sound, even the volume of the amplifier is at its highest leveL
You will need:
,, one pair of standard audio cables
Amplifier
÷
TV
=2
(o) 1
÷
15
J3U00121A(E) P07-15 15 _ 10/03/2005, 6:18 AM

÷
÷
Using the remote controR
Preparing the remote controm for use
With the remote control, you can operate your TV, most cable TV
converters/satellite receivers, VCR and DVD player models together,
even if they are different brands, if you will be using your TV with a
Toshiba satellite receiver, VCR or DVD player, your remote controi is
already programmed and ready to use. if you own different brands of
cable TV converters/satellite receivers, VCRs and/or DVD players, you
first have to program your remote control. (See "Programming the
remote control for use with a cable TV converter/satellite receiver, VCR
or DVD player" on page 17.)
nstaHing the remote controm batteries
To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two "AAA" size batteries. Match the + and - signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.
Using the remote eontrom to operate your
To controm a cable TV Power
converter/satellite Input(TV) --
receiver: Mute (TV) --
Channel
Program the remote Numbers --
control to recognize the CH RTN
brand of your cable TV (ChannelReturn)--
converter/sate!Iite receiver ChannelA V
(see "Programming the CBL/SAT -- _,_. vo,
remotecontroItooperate Volurrle+/-(TV)-- _ _
your other devices" on Pic Size (TV) --
page 17.) The buttons
shown at right will control
the cable TV converter/
satellite receiver.
Press "CBL/SAT" first. TV/VCR -- _i
16
Nots:
7_heTV remote control may not operate your
VCR, DVD player, or cable TV converter.
Refer to the owner's manual supplied with the
appficab/e equipment to see which features
may be available. Additionatlx the remote
control for this TV may not support certain
features available on the odginaI remote
controls for such additional equipment, in
which case, it is suggested that you use the
original remote control for the appticabte
device.
Caution:
, Never throw batteries into a fire,
Notes:
, Be sure to useAAA size batteries.
, Disposeofbattedesinadesignateddisposa/area.
, Batteriesshould alwaysbedisposedof with the
environmentin mind.Alwaysdispose ofbatteriesin
accordancewithapplicablelaws andregulations.
, tf the remote control does not operate correctly,
or if the operating range becomes reduced,
replace batteries wftbnew ones.
, When necessary to replace batteries in the
remote control, alwaysreplace both batteries
with new ones. Never mix battery tyt_esor use
new and used batteries in combination.
, Alwaysremovebatteriesfromremotecontmlif they
aredeador ff theremotecentre/is nottobe usedfor
an extendedperiodof time.Thiswillpreventbattery
acidfromleakingintothebatterycompartmenL
other devices
To controm a VCR:
Program the remote input (TV) --
controI to recognize Power --
Channel
the brand of your VCR Numbers --
(see "Programming the CH RTN
remote control to (ChannelReturn)--
operate your other VCR --
devices" on page 17.) Channel A_/ --
The buttons shown at Volume +/- (TV) --
right will then control Pic Size (TV) --
the VCR.
Press "VCR" first.
VCR controls --
ii_ii_!!i!i!i_!,ii,__i_i_i_i_:__:,!,!;_iiI
m.Jill!If
iiiii_iiii
iiiiiiiiiiiil/_
ililililili:_ii_il
iiiiii_iiiiii/i
÷
J3U00121A(E) P16-23 16 _ 10/03/2005, 6:20 AM

÷
To control a DVD player:
Program the remote
control to recognize the
brand of your DVD
player (see
"Programming the
remote control to
operate your other
devices" below.) The
buttons shown at right
wiil then control the
DVD player.
Press "DVD" firsL
Input (TV)
Recall
Mute (TV)
Number
Volume +/- (TV)
DVD
Pic Size (TV)
DVD MENU
AT _
ENTER
DVD controls
DVD Skip/Search
TOP Menu
DVD
÷
Programming the remote control to operate
your other devices
This remote control is pre-programmed to operate Toshiba satellite
receivers, VCRs and DVD players. To controI cable TV converters/
satellite receivers, VCRs and DVD piayers other than Toshiba models,
you must follow the steps below to program your remote control.
1. Refer to the code tables (on pages 18 and 19) to find the
corresponding code for your brand.
If more than one code is listed, trY each one separately until you
find the one that works.
2. If you are programming the remote control to operate your:
,,Cable TV convertedsatellite receiver: Press "CBL/SAT."
,,VCR: Press "VCR."
,,DVD player: Press "DVD."
3. While holding down RECALL, press the Channel Number buttons
to enter the three-digit code for your cable TV converter/satellite
receiver, VCR or DVD player brand.
4. Point the remote control at the cable TV converter/satellite
receiver, VCR or DVD player, and press POWER to test the code.
,,If the cable TV converter/satellite receiver, VCR or DVD player
responds, you entered the correct code.
,,If the cabie TV converter/satellite receiver, VCR or DVD player
does not respond, repeat steps 1-4 using another code.
5. Press "TV" to control the TV.
For future reference, write down the codes you used:
Cable TV converter/satellite receiver code
VCR code
DVD player code
17
Notes:
Recall
Channel
Numbers
DVD
CBL/SAT
When shipped from the factory, the remote
control is set to operate your T_Z
Ifyou do not enter the code within 10
seconds from step 1 or if you enter a code
not listed befow; this operation is canceled.
Each time you replace the battedes, you
must reprogram the ,remote control.
Some newer VCRs are capable of working
on either of two remote codes. These VCRs
have a switch labeled "VCR1/VCR2."
ffyour VCR has this kind of switch and does
not respond to any of the codes for your
VCR, set the switch to the other position
(VCR1 or VCR2) and reprogram the remote
control.
÷
J3U00121A(E) P16-23 17 _ 10/03/2005, 6:20 AM

÷
÷
Cable TV cenverter/satellite receiver, VCR and DVD player cede tables
[For CBL/SAT Mode]
CABLE Box
Brand Code
ABC 061,062,063, 082,
084, 087, 091,092,
096, 098
Archer 065, 092,097, 099
Cabieview 064, 094
Century 092
Citizen 090, 092,097
Contec 083, 085, 086, 088,
093, 098
Diamond 093
Eagle 091
GE 061,062
Gemini 069, 070, 094
General Instruments 062, 089,096
Hamlin 093
Hitachi 062, 095, 096
Jasco 097
Satellite
Brand Code
Jerrold 062, 069,071,082,
086, 089,091,096
Magnavox 072, 096
Memorex 091,092, 104
Multi Canal 090
Novavision 101
Panasonic 081,083, 085
Phiico 087
Philips 066, 067, 068, 070,
072, 073, 074, 075,
091,092
Pioneer 076, 077
Proscan 061,062
Radio Shack 092, 097, 099
RCA 064, 081
Realistic 065
Recoton 102
Samsung 077, 090
Brand Code
Scientific Atlanta 063, 078, 079,080,
088, 098, 101, 105
Sears 095
Signature 062
Signature 2000 096
Sprucer 081,085
Starcom 069,082, 087, 096,
103, 104
Stargate 069,090
Sylvania 095, 100
TeleView 090
Texscan 100
Tocom 071,084, 085
U. S. Bectronics 087, 096, 098
United Cable 082
Universal 065, 092, 097, 099,
102, 103
Wards 096
Brand Code
Alphastar 038, 059
Chaparral 034
DISH Network 057
Drake 020, 040,044, 046,
050, 053
Echostar 018, 041,051
Express Vu 057
Fuiitsu 027
GE 008, 009,013
General Instruments 010, 011,012, 022,
023, 031,049
Hitachi 033
Hughes 033
Brand Code
Hughes Network 019
Systems
[ntersat 048
Janeil 027
JVC 017, 057
Kenwood 029
Magnavox 060
Optimus 058
Pansat 036, 052
Primestar 015, 042
Proscan 008, 009,013
Radio Shack 022, 023, 030
RCA 008, 009,013,016
Brand Code
Realistic 030
Samsung 059
Sony 014,055
Star Choice 057
Star Trak 025,026,037, 054
STS 024
Toshiba 000,001,002, 003,
004,005,006, 007,
020,031,056
Uniden 021,028,030, 032,
035,039,043, 045,
047,058
Zenith 027
[For VCR Mode]
VCR
Brand
Admiral
Aiko
Aiwa
Akai
Audiovox
Bell & Howell
Broksonic
Calix
Carver
CCE
Citizen
Co!ortyme
Craig
Curtis Mathes
Daewoo
Daytron
Denon
Dimensia
Ebctrohome
Emerson
Fisher
Code
O49
019
018
003,004,037,038,
039,058,069
010
007,068
008,017
010
026
019
009,010,011,012,
013,014,015,019,
057,073
005
009,010,016,061,
065,079
001,005,009,012,
014,040,048,053,
056,057
011,013,015,017,
018,019,057,078
O78
063
001,048
010,020,065
003,008,010,011,
017,018,020,028,
039,054,057,062,
065,068,072
007,016,021,022,
023,057,064,068,
070,071,079
Brand Code
Fuii 004,041
Funai 018,073
Garrard 018
GE 001,002,009,
042,048,056
Go Video 056,059,061,
Goldstar 005,010,014,
056,065,067
Gradiente 018,065
Harman Kardon 005
Hitachi 024,025,035,
042,063,070,
JBL 076
JC Penney 005,006,007,
009,010,023,
025,026,035,
06!,063,065
Jensen 024,025,037
JVC 005,006,007,
037,043,062,
068,082
Kenwood 005,006,007,
014,037,043,
068,071
Kodak 010
LG 010
Lloyds 053,073,079
Logik 061
LXI 010
Magnasonic 061,065,078
Magnavox 026,027,034,
057,061,072
Brand
Marantz
Memorex
040,
081
054, MGA
MGN
Minolta
Mitsubishi
037,
080 Montgomery Ward
Motorola
008, MTC
024, Multitech
056, NEC
014, Nikko
063, Nobbx
Optimus
012, Optonica
053, Orion
Panasonic
Pentax
Pentex Research
Philco
044, Philips
Pioneer
Cede
005,006,007,012,
014,026,053,067
007,009,010,016,
018,034,049,063,
065,066,068,075,
079
020,028,039
056
024,025,035,063
020,024,025,028,
039,043,065
O49
049
009,046,061
009,012,018
005,006,007,012,
014,037,043,053,
054,067,070
010
OO9
010,049,065
031
054,057,062,065,
068,072
036,045,046,057,
061,072,079
012,024,025,035,
042,053,063
014
026,027,063
026,031,044,057
006,024,043,055
18
÷
J3U00121A(E) P16-23 18 _ 10/03/2005, 6:20 AM

÷
÷
VCR (Continued)
Brand Code
Portland 012, 013,015
Proscan 001,002,048
Proton 061
Quasar 045
Radio Shack 010, 031,065
Radio ShacW 007, 009,010,016,
Realistic 018, 020,021,022,
031,049
Radix 010
RCA 001,002,003,009,
024, 025,029,035,
040, 042,045,048,
055, 056,063,071,
083
Realistic 007, 009,010, 011,
016, 018,020, 02!,
022, 031,049,051,
056, 060,065,075,
079
Ricoh 047
Runco 034
Samsung 009, 011,038,056,
073, 084
Sansui 006, 037,043,061
Brand
Sanyo
Scott
Sears
Sharp
Shintom
Signature
Signature 2000
Singer
Sony
STS
Sylvania
Symphonic
Tandy
Code
007,009,016,054,
064,068,071,075,
079,085
008,011,017,028,
030,057,065,072
007,010,016,021,
022,023,024,025,
035,053,057,083,
064,065,068,071,
075,079
013,020,031,049,
051,060,066
004,025,032,061
O49
O75
047,061
004,032,033,041,
052,058,070,074,
076,077,080
035
018,028,027,028,
044, 072
018,051,053,073,
079
OO7
Brand
Tashiko
Tatung
Teac
Technics
Teknika
Toshiba
Totevision
Unitec
Unitech
Vector Research
Video Concepts
Wards
White Westinghouse
XR-IO00
Yamaha
Zenith
TV/VCR Combo
Brand Code Brand Code
Action 078 Precision 078
GE 059, 062 Quasar 085
Goldstar 065 Realistic 079
Panasonic 065 Sony 074
[For DVD Mode]
DVD
Brand
Aiwa
Apex
BOSE
Broksonic
Clarion
Classic
Daewoo
Denon
Emerson
Fisher
Funai
GE
Go Video
GPX
Hitachi
JVC
Code
008,015
018,017
097
018
019
O2O
021
022,023,024,025
028,027
O28
O27
001,029,030
O87
031
005,032,033,034,
035
003,007,036,042,
O88
U
Portable DVD
Brand Code
Aiwa 093
Audiovox 094, 095
Brand
Toshiba
Zenith
Totevision
Brand
Kenwood
Konka
Magnavox
Memorex
Mintek
NAD
Nakamichi
Norcent
Onkyo
Oritron
Panasonic
Philips
Pioneer
Proscan
Qwestar
RCA
Brand
Panasonic
HTIB
Brand Code [ Brand
Lasonic 083 UPanasonic
[For VCR and DVD Mode]
DVD/VCR Combo
I Brand VCR Cede
Go Video 081
JVC 082
RCA 083
Code
O37
008,009
004,038
039
O4O
026
041
O43
O44
O58
010,045,046,047,
048,049,050
004,051
052,053,054,055
001,058
057,058
001,002,059,089
Code
024,098,099
Brand
Sampo
Samsung
Sansui
Sanyo
Sharp
Sherwood
Sony
Sylvania
Teac
Technics
Techwood
Toshiba
Yamaha
Zenith
Brand
RCA
Cede
O84 Brand Venturer
DVD Code
087
088
089
Brand
Samsung
Sanyo
Zenith
VCR Code
O84
O85
O86
19
Cede
010
O37
018,029,037
036
010,018,065
000,011,021,023,
024,028,030,039,
057,074,078,079
009,010,065
O73
OO9
005,006,011,012,
053
005,006,011,012,
039,053
009,010,011,018,
018,020,024,025,
03!,035,049,051,
056,057,080,065,
068,079
O73
018
005,006,007,014,
037,053
004,032,034,041,
047,069,088
Cede
O57
O65
009,010,085
Cede
O6O
061,062,086,090
073
063,091
064,067
074
011,012,065,066,
068,069,070
O27
071
O72
O75
000,013,076,077,
078
079,080,081
014,082,092
Code
098
Cede
O85
DVD Cede
090
091
092
÷
J3U00121A(E) P16-23 19 _ 10/03/2005, 6:20 AM

÷
÷
Learning about the remote controm
POWER turns the TV on and off
SLEEP programs the TV to turn off at a set time (page 37)
TV/VIDEO selects the video input source (page 27)
OH/k/V cycles through programmed channels (page 22)
TV selects TV mode
CBL/SAT selects CBL/SAT mode (page 16)
VOR selects VCR mode (page 16)
DVD selects DVD mode (page 17)
TV/Video
Recall
Channel
Numbers
CHANNEL NUMBERS allow direct access to channels (page 23) Channel A/v
VOL +/- adjusts the volume level TV
OH RTN (Channel Return) returns to the last viewed channel CBL/SAT
(page 23) Sleep
MENU/ENTER alIows access to programming menus, and sets
programmed menu information (page 21 ) DVDMenu
FAV A/_' (Favorite Channels} cycte through favorite channels
(page 23) Enter
Pause
MUTE turns off the sound (page 38) Skip/Search
RECALL displays status information on-screen (page 25) _ _-_4
Rew
EXIT closes on-screen menus (page 21) TOP Menu
Pine SmZE cycles through the five picture sizes: Natural, TheaterWide Rec
1,2, 3, and full (page 31)
STOP stops a videotape/DVD
REC starts recording a videotape
PLAY plays a videotape/DVD
FF fast forwards a videotape/DVD
REW rewinds a videotape/DVD
PAUSE pauses a videotape/DVD
TV/VOR toggles between TV and VCR modes when viewing
while recording
DVD SKIP/SEARCH _4 _4 skips DVD chapter
DVD CLEAR clears input data in DVD mode
TOP MENU access the DVD TOP menu
DVD MENU access the DVD menu
-- POWER
-- Mute
Volume +/-
VCR
DVD
Picture Size
FAV AY
(FavoriteChannels)
Menu/Enter
Exit
Play
Stop
FF
TV/VCR
Clear ÷
J3U00121A(E) P16-23 20 _ 10/03/2005, 6:21 AM