Toyota 2015 camry hybrid User manual

2015
Camry
Quick Reference Guide

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
1
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental operations
so you can locate and use the vehicle’s main equipment quickly
and easily.
The Quick Reference Guide is not intended as a substitute for the
Owner’s Manual located in your vehicle’s glove box. We strongly
encourage you to review the Owner’s Manual and supplementary
manuals so you will have a better understanding of your vehicle’s
capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales, U.S.A.,
Inc. wish you many years of satisfied driving in your new Camry.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of
Camry operations. Every Camry owner should review the Owner’s
Manual that accompanies this vehicle.
Pay special attention to the boxed information highlighted in
color throughout the Owner’s Manual. Each box contains safe
operating instructions to help you avoid injury or equipment
malfunction.
All information in this Quick Reference Guide is current at the
time of printing. Toyota reserves the right to make changes at
any time without notice.
2015
Camry
INDEX
1Visit your Toyota dealer for information on customizing this feature.
2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
3HomeLink®is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES/OPERATIONS
Lane Departure Alert (LDA) 25
Moonroof 12
Multi-Information Display124
Parking brake 11
Power outlets-12V DC 14
PCS (Pre-collision system) 25
Rear view monitor system 17
Seat adjustments-Front 13
Seat adjustments-Rear 13
Seat heaters 19
Seats-Head restraints 12
Steering lock release 11
Steering wheel switches and
Telephone controls (Bluetooth®) 20
Tilt and telescopic steering wheel 11
Traffic 22
Weather 22
Windows-Power 12
Wipers & washers 14
Wireless Charging 24
Door locks 24
Doors-Child safety locks 24
Floor mat installation 28
Safety Connect 25
Seat belts 24
Seat belts-Shoulder belt anchor 25
Spare tire & tools 26
Star Safety SystemTM 27-28
Trunk internal release 26
Engine maintenance 9
Fuel tank door release and cap 8
Hood release 9
Indicator symbols 4-5
Instrument cluster 4
Instrument panel
2-3
Keyless entry
1,2
6
Light control-Instrument panel 8
Smart Key System1,2 7
Air Conditioning/Heating 18-19
Audio 21
Auto lock/unlock1,2 10
Automatic Transmission 10
Bluetooth®Device Pairing Section 29-38
Bottle holders 23
BSM (Blind Spot Monitor) 17
Clock 18
Cruise control 16
Cup holders 23
Garage door opener (HomeLink®)316
iPod®/USB/AUX port 22
Lights1& turn signals 15
SAFETY AND EMERGENCY FEATURES

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
2 3
OVERVIEW
Instrument panel
Steering wheel audio controls1,2,3
Telephone controls1,2,3
Voice command button1,2,3
Cruise control
Paddle shift switches1
Meter control switches1
Vehicle-to-vehicle distance button1
Headlight and turn signal controls/Headlight, turn signal and front fog
light1 controls
Wiper and washer controls
“ENGINE START STOP” button (Smart Key)1
Audio system1/Navigation system1,2/Display audio system1,3
Emergency flasher button
Tire pressure warning reset switch1
Key ignition
Tilt and telescopic steering lock release
Air Conditioning controls
Outside rearview mirror1/Rear window defogger button
Seat heater controls1
BSM (Blind Spot Monitor) main switch1
VSC OFF switch
LDA (Lane Departure Alert) switch1
PCS (Pre-Collison System) switch1
1If equipped
2For details, refer to the “Navigation System Owner’s Manual.”
3For details, refer to the “Display Audio System Owner’s Manual.”
NOTE: For vehicles equipped with EntuneTM, please consult the “Navigation
System With Entune Quick Reference Guide” or www.toyota.com/entune.
Steering wheel controls Automatic Air Conditioning Manual Air Conditioning
Type A
Type B

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
4 5
OVERVIEW
Instrument cluster
Service indicators and reminders
Tachometer
Speedometer
Fuel gauge
Average fuel consumption meter
Display change button
Odometer/Trip meter
Engine coolant temperature display
Outside temperature display
Shift position/Shift range display
Instrument panel light control button
Charging system warning1
2If this light flashes, refer to “Cruise control,” Section 2-4, 2015 Owner’s Manual.
3 Light flashes in yellow to indicate a malfunction. Light flashes quickly in green to indicate that
the steering lock has not been released.
Headlight low/high beam indicator
Turn signal indicator
Slip indicator1
Cruise control indicator2/Cruise control SET indicator2
Low Tire Pressure Warning1
Theft deterrent/Engine immobilizer system indicator
Open door warning
SRS airbag warning1
Low windshield washer fluid warning1
Electric power steering system warning1
Low engine oil pressure warning1
Malfunction/Check Engine indicator1
Maintenance required reminder1
Low fuel level warning
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Vehicles without a multi-information display
Vehicles with a multi-information display
Anti-lock Brake System warning1
Indicator symbols
Brake system warning1
For details, refer to “Indicators and warning lights,” Section 2-2, 2014 Owner’s
Manual.
1If indicator does not turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
Traction Control OFF indicator1
Vehicle Stability Control OFF indicator1
Eco Driving indicator1
Pre-collison system warning1
Master system warning1
Automatic high beam indicator
Land Departure Alert (LDA) warning1
Passenger Air Bag ON/OFF indicator1

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
6 7
OVERVIEW
Keyless entry (if equipped)
Push
Push ONCE: Driver door
TWICE: All doors
Locking operation
Unlocking operation
Type A
Smart Key system (if equipped)
Start function
Accessories such as the radio will operate.
Power ON; the engine not running.
All systems OFF.
ACC
ON
OFF
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Without depressing the brake pedal, pressing the “ENGINE START STOP” switch
will change the operation mode in succession from:
* Driver door unlocking function can be programmed to unlock driver door only, or
all doors. Grasping front passenger door handle will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
Power (without starting engine)
Panic button
Push and hold
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for
safety.
Trunk lid
Push and hold Trunk lock/unlock
Push
Locking operation Unlocking operation
Carry remote to lock Carry remote to unlock
Front door lock
Carry remote to lock/unlock
Front door unlock*
Type C
Type A
Type A
Type C
Type C
Touch
Grasp

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
8 9
Hood release
Pull up latch and raise hood
Pull
Fuel tank door release and cap
NOTE: Tighten until one click is heard. If the cap is not tightened enough,
Check Engine “ ” indicator may illuminate.
Pull up
Turn to open
Store
Engine oil filler cap
Engine oil level dipstick
Engine coolant reservoir
Windshield washer fluid tank
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer
to the “Warranty Maintenance Guide.”
Light control-Instrument panel
Brightness control
Engine maintenance
4 cylinder (2AR-FE) engine
6 cylinder (2GR-FE) engine
OVERVIEW
Without a multi-information display With a multi-information display
Brightness control
Turn to close

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
1110
FEATURES/OPERATIONS
Automatic Transmission
* The “ENGINE START STOP”/ignition switch must be “ON” and the brake pedal
depressed to shift from Park.
Shift the shift lever to “S” position from “D” position.
+: Upshifting
-: Downshifting
Downshifting increases power going uphill, or provides engine braking downhill.
For best fuel economy during normal driving conditions, always drive with the shift
lever in the “D” position.
“S” (Sequential) mode
Steering lock release
Turn
Smart Key system* Without Smart Key system
Push
Turn
Parking brake
Park*
Reverse
Neutral
Drive
N
“S” mode
Auto lock/unlock
Automatic door locks can be programmed to operate in four different modes, or
turned OFF.
-Doors lock when shifting from Park.
-Doors lock when the vehicle speed goes above approximately 12 mph.
-Doors unlock when shifting into Park.
Vehicles without Smart Key system
-Doors unlock when the ignition switch is set from “ON” to “ACC” or “LOCK” and
driver’s door is opened.
Vehicles with Smart Key system
-Doors unlock when the “ENGINE START STOP” switch is set to OFF and driver’s
door is opened.
Refer to the Owner’s Manual for more details.
U.S.A. Canada
Set: Depress
Release: Depress again
Hold wheel, push lever down, set angle and length, and return lever.
Lock release lever
NOTE: Do not attempt to adjust while the vehicle is in motion.
Tilt and telescopic steering wheel
* Gently turn steering wheel while pressing the
“ENGINE START STOP” switch. If the lock does
not release, the Smart Key system indicator
will flash quickly (green).
Angle
Length
+(“S” mode)
-(“S” mode)
+(“S” mode)
-(“S” mode)
Paddle shift switches
(if equipped)
Shift lever

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
12 13
FEATURES/OPERATIONS
Moonroof (if equipped)
Sliding operation Tilting operation
Open Tilt
Close Close
Recommended driving position
to minimize wind noise.
Seat adjustments-Front
Power seat*
Seat position (forward/backward)
Height crank (driver side only)
Seatback angle
Seat position, cushion angle (driver side only) and height (driver side only)
Lumbar support (driver side only)
*Power passenger seat equipped on some models, see Owner’s Manual for more details.
Seat adjustments-Rear
Pull
Fold down
Refer to the Owner’s Manual for more details.
Seats-Head restraints
Lock release button
Windows-Power
Up
Down
Driver side
Window lock switch
Automatic operation (driver’s and passenger’s side) Push the switch completely
down or pull it completely up and release to fully open or close. To stop the
window partway, operate the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
Push once to open; moonroof will automatically stop at the recommended
position. Push again to open completely.
Push once to open partway;
again to open completely.

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
14 15
Power outlets-12V DC
Front console
The “ENGINE START STOP” switch/ignition switch must be in the “ACC” or “ON”
position for use.
Center console (if equipped)
Lights & turn signals
Turn signals
Headlights
High beam
-Daytime Running Light system (DRL) Automatically turns on the headlights at a
reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30-second
delay, or lock switch on remote may be pushed after locking.
Right turn
Lane change1
Lane change2
Left turn
High beam
flasher
Windshield wipers & washers
Adjust frequency*
Pull to wash and wipe
Single wipe
Interval wipe
Slow
Fast
FEATURES/OPERATIONS
* Intermittent windshield wiper frequency adjustment
Rotate to increase/decrease wipe frequency.
Headlights
Parking lights
DRL OFF
Low beam
1
The right hand signals will flash three times.
2
The left hand signals will flash three times.

OVERVIEW FEATURES/OPERATIONS SAFETY AND EMERGENCY FEATURES
16 17
FEATURES/OPERATIONS
Cruise control
1
The set speed may also be cancelled by depressing the brake pedal.
2 The set speed may be resumed once vehicle speed exceeds 25 mph.
Turning system ON/OFF
Functions
System ON/OFF
Increase speed
Decrease speed
Cancel1
Resume2
Garage door opener (HomeLink®)*
(if equipped)
3-5. Other interior features
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 3-5 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink®at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink®is a registered trademark of Gentex Corporation.
Set
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper
of the rear area of the vehicle. The camera for the rear view monitor system is
located above the license plate.
To adjust the image on the rear view monitor screen, press the “SETUP” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the
screen contrast and brightness.
Refer to the Owner‘s Manual for more details on this system.
BSM (Blind Spot Monitor)(if equipped)
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in decision-making when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The Blind Spot Monitor function uses radar sensors to detect vehicles that are
traveling in an adjacent lane in the area that is not reflected in the outside rear
view mirror (the blind spot), and advises the driver of the vehicles existence via
the outside rear view mirror indicator.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
System ON/OFF
Rear Cross Traffic Alert buzzer