Traction Hobby FISO PRO User manual

1
F 1 5 0 P R O
Thank you for purchasing the all-new TRACTION HOBBY F150 Pro Scale and Trail Crawler. The design of
the F150 Pro instantly obsoletes the status quo with greatly expanded features and versatility. The F150 Pro
features the powerful 775 motor and a 4s LiPo-capable electronic speed control. The game-changing portal
axles provide greater ground clearance while the rigid steel frame eliminates chassis ex and allows you to
navigate tough terrain. The new Mark Ma tires feature tuned foam inserts to deliver superior bite on rocky
surfaces with convincing scale realism. In other words, we built it the TRACTION HOBBY way rugged
powerful, and ready to handle the rigors of remote locations and all-day driving fun!
This manual contains the instructions you will need to operate and maintain your model so that you can
enjoy it for years to come. We want you to feel condent that you own one of the bestperforming models in
the market and that it is backed by a team of professionals who aim to provide the highest level of factory
support possible. TRACTION HOBBY models are about experiencing total performance and satisfaction
not just with your model, but also with the company that stands behind it.
We know you are excited about getting your new model on the trail,but itas very important that you take some
time to read through the Owneras Manual. This manual contains all the necessary setup and operating
procedures that allow you to unlock the performance and potential that TRACTION HOBBY engineers
designed into your model.Even if you are an experienced R/C enthusiast, itas important to read and follow
the procedures in this manual.
Thank you again for going with TRACTION HOBBY . We work hard every day to assure you the highest
level of customer satisfaction possible.We truly want you to enjoy your new model!
Carefully read and follow all instructions in this and any accompanying materials to prevent serious
damage to your model. Failure to follow these instructions will be considered abuse and/or neglect.
Before running your model, look over this entire manual and examine the model carefully. If for some
reason you decide it is not what you wanted, then do not continue any further. Your hobby dealer
absolutely cannot accept a model for return or exchangeafter it has been run.
10
7

2
F 1 5 0 P R O
If you have any questions about your model or its operation, call the TRACTION HOBBY Technical Support
Line at:86-0573-84639307/0573-84639306
You may also e-mail customer support with your question at [e-mail].
TRACTION HOBBY offers a full-service, on-site repair facility to handle any of your TRACTION HOBBY
service needs. Maintenance and replacement parts may be purchased directly from TRACTION HOBBY
by phone. You can save time, along with shipping and handling costs, by purchasing replacement parts
from your local dealer.
Do not hesitate to contact us with any of your product support needs.We want you to be thoroughly satised
with your new model!
All of us at TRACTION HOBBY want you to safely enjoy your new model.Operate your model sensibly and
with care, and it will be exciting,safe, and fun for you and those around you. Failure to operate your model
in a safe and responsible manner may result in property damage and serious injury. The precautions
outlined in this manual should be strictly followed to help ensure safe operation. You alone must see that
the instructions are followed and the precautions are adhered to.
1.Your model is not intended for use on public roads or congested areas where its operation can conict with
or disrupt pedestrian or vehicular trafc.
2.Never, under any circumstances, operate the model in crowds of people. Your model could cause injury if
allowed to collide with anyone.
3.Because your model is controlled by radio, it is subject to radio interference from many sources that are
beyond your control.Since radio interference can cause momentary losses of radio control, always allow a
safety margin in all directions around the model in order to prevent collisions.
4.The motor, battery, and speed control can become hot during use.Be careful to avoid getting burned.
5.Don’t operate your model at night, or anytime your line of sight to the model may be obstructed or impaired
in any way.
Your model’s electronic speed control (ESC) is an extremely powerful electronic device capable of delivering
high current.
Please closely follow these precautions to prevent damage to the speed control or other components.
1.Disconnect the Battery: Always disconnect the battery from the speed control when not in use.
2.Insulate the Wires: Always insulate exposed wiring with heat shrink tubing to prevent short circuits.
3.2-4 LiPo cells (2S): The ESC can accept a maximum input voltage of 14.8 volts (4S LiPo).Always adhere
to the minimum and maximum limitations of the ESC as stated in the specications table.
4.Transmitter on First: Switch on your transmitter rst before switching on the speed control to prevent
runaways and erratic performance.
5.Don’t Get Burned: The ESC and motor can become extremely hot during use, so be careful not to touch
them until they cool. Supply adequate airow for cooling.
6.No Reverse Voltage: The ESC is not protected against reverse polarity voltage.

3
F 1 5 0 P R O
Your model is able to use LiPo batteries. Charging and discharging batteries has the potential for re,
explosion, serious injury, and property damage if not performed per the instructions. Before use, read and
follow all manufacturer’s instructions, warnings, and precautions. In addition, Lithium Polymer (LiPo)
batteries pose a SEVERE risk of re if not properly handled per the instructions and require special care
and handling procedures for long life and safe operation. LiPo batteries are intended only for advanced
users that are educated on the risks associated with LiPo battery use. TRACTION HOBBY does not
recommend that anyone under the age of 14 use or handle LiPo battery packs without the supervision of
Important Warnings for users of Lithium Polymer (LiPo) batteries:
1.LiPo batteries have a minimum safe discharge voltage threshold that should not be exceeded. The
electronic speed control is equipped with built-in Low-Voltage Detection that alerts the driver when LiPo
batteries have reached their minimum voltage (discharge) threshold. It is the driver’s responsibility to stop
immediately to prevent the battery pack from being discharged below its safe minimum threshold.
2.Low-Voltage Detection is just one part of a comprehensive plan for safe LiPo battery use. It is critical to
follow all instructions for safe and proper charging, use, and storage of LiPo batteries. Make sure you
understand how to use your LiPo batteries. If you have questions about LiPo battery usage, please
consult with your local hobby dealer or contact the battery manufacturer. As a reminder,all batteries should
be recycled at the end of their useful life.
3.ONLY use a Lithium Polymer (LiPo) balance charger with a balance adapter port to charge LiPo batteries.
Never use NiMH or NiCad type chargers or charge modes to charge LiPo batteries. DO NOT charge with
a NiMH-only charger. The use of a NiMH or NiCad charger or charge mode will damage the batteries and
may cause re and personal injury.
4. NEVER charge LiPo battery packs in series or parallel. Charging packs in series or parallel may result in
improper charger cell recognition and an improper charging rate that may lead to overcharging, cell
imbalance, cell damage, and re.
5.ALWAYS inspect your LiPo batteries carefully before charging. Look for any loose leads or connectors,
damaged wire insulation, damaged cell packaging, impact damage, uid leaks, swelling (a sign of internal
damage), cell deformity, missing labels, or any other damage or irregularity.If any of these conditions are
observed, do not charge or use the battery pack. Follow the disposal instructions included with your
battery to properly and safely dispose of the battery.
6.DO NOT store or charge LiPo batteries with or around other batteries or battery packs of any type,
including other LiPos.
7.Store and transport your battery pack(s) in a cool dry place.DO NOT store in direct sunlight. DO NOT
allow the storage temperature to exceed 140°F or 60°C, such as in the trunk of a car, or the cells may be
damaged and create a re risk.
8.DO NOT disassemble LiPo batteries or cells.
9.DO NOT attempt to build your own LiPo battery pack from loo
Charging and handling precautions for all battery types:
1.BEFORE you charge, ALWAYS conrm that the charger settings exactly match the type (chemistry),
specication, and conguration of the battery to be charged.
2. DO NOT attempt to charge non-rechargeable batteries (explosion hazard), batteries that have an internal
charge circuit or a protection circuit, batteries that have been altered from original manufacturer
conguration, or batteries that have missing or unreadable labels,preventing you from properly identifying
the battery type and specications.
3.DO NOT exceed the maximum manufacturer recommended charge rate.
a knowledgeable and responsible adult. Dispose of used batteries accord

4
F 1 5 0 P R O
4.DO NOT let any exposed battery contacts or wires touch each other.This will cause the battery to short
circuit and create the risk of re.
5.While charging or discharging, ALWAYS place the battery (all types of batteries) in a re retardant/re
proof container and on a non-ammable surface such as concrete.
6.DO NOT charge batteries inside of an automobile. DO NOT charge batteries while driving in an
automobile.
7.NEVER charge batteries on wood, cloth, carpet, or on any other ammable material.
8.ALWAYS charge batteries in a well-ventilated area.
9.REMOVE ammable items and combustible materials from the charging area.
10.DO NOT leave the charger and battery unattended while charging, discharging, or anytime the charger
is ON with a battery connected. If there are any signs of a malfunction or in the event of an emergency,
unplug the charger from the power source and disconnect the battery from the charger.
11.DO NOT operate the charger in a cluttered space, or place objects on top of the charger or battery.
12.If any battery or battery cell is damaged in any way, DO NOT charge,discharge, or use the battery.
13.Keep a Class D re extinguisher nearby in case of re.
14. DO NOT disassemble, crush, short circuit, or expose the batteries to ame or other source of ignition.
Toxic materials could be released.If eye or skin contact occurs, ush with water.
15.If a battery gets hot to the touch during the charging process (temperature greater than 110°F / 43°C),
immediately disconnect the battery from the charger and discontinue charging.
16.Allow the battery pack to cool off between runs (before charging).
17.ALWAYS unplug the charger and disconnect the battery when not in use.
18.ALWAYS unplug the battery from the electronic speed control when the model is not in use and when it
is being stored or transported.
19.DO NOT disassemble the charger.
20.REMOVE the battery from your model or device before charging.
21.DO NOT expose the charger to water or moisture.
22.ALWAYS store battery packs safely out of the reach of children or pets. Children should always have
adult supervision when charging and handling batteries.
Your model comes with a set of specialty metric tools. You’II need to purchase other items, available from
your hobby dealer, to operate and maintain your model.
Supplied Tools and Equipment
4-way wrench
Required Equipment (not included)
Charger2S-4S Lipo battery

5
F 1 5 0 P R O
Chassis top view
Receiver Connection
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
Receiver
BATTERY
Brushed Motor
CH1: Steering Servo
CH2: Brushed ESC
CH3: 2WD/4WD Shifting Servo
CH4: 2 Speed Shifting Servo
CH5: Front Diff Lock Servo
CH6: Rear Diff Lock Servo
Rear Diff Lock Servo
Transfer CaseShifting Servo
Transmission
Shifting Servo
Front Diff
Lock Servo
Electronic
Speed Control
Steering Servo

6
F 1 5 0 P R O
Radio Maintenance
Bind/VCC
LED
Antenna CH 1-6
Receiver
Battery
Compartment
Button
(Channel 3)
Throttle/Brake
(Channel 2)
Steering
D/R
Power Switch
BACK/Exit
BIND
LED Indicator
LCD
Channel 5
NaviKey
(Rotate to “Select”, press to
“Conrm”)
3 Position Switch
(Channel 4)
Steering Trim
(Channel 1)
Throttle Trim
(Channel 2)
Steering Wheel
(Channel 1)
Channel 6
Antenna
Transmitter

7
F 1 5 0 P R O
High Gear Servo state(High speed)
High Gear state
Low Gear state
Low Gear Servo state(Low speed)
Before you go on, here are some important precautions to keep in mind.
1.Allow the model to cool for a few minutes between runs. This is particularly important when using
high-capacity battery packs that allow extended periods of running. Monitoring temperatures will extend the
lives of the batteries and motor.
2. Do not continue to operate the model with low batteries or you could lose control of it. Indications of low
battery power include slow operation and sluggish servos (slow to return to center). Stop immediately at
the rst sign of weak batteries.
3.Do not drive the model at night, on public streets, or in large crowds of people.
4.Drive the F150 Pro primarily in low gear for maximum torque. High gear can be used for high-speed
running on open trails or when clearing steep slopes or gaps in rocks. Driving in high gear for extended
periods of time can result in the motor and/or ESC overheating and premature motor wear.
5.Because the model is controlled by radio, it is subject to radio interference from many sources beyond your
control. Since radio interference can cause momentary losses of control, allow a safety margin of space in
all directions around the model in order to prevent collisions.
6.Use good, common sense whenever you are driving your model. Intentionally driving in an abusive and
rough manner will only result in poor performance and broken parts. Take care of your model so that you
can enjoy it for a long time to come.
7.High-performance vehicles produce small vibrations that may loosen hardware over time. Frequently check
wheel nuts and other screws on your vehicle to ensure that all hardware remains properly tightened.
Operating the High-Low Transmission:
1.In the original state, use the third channel button of the remote control to switch the gearbox position.
There are obvious speed changes between the high-speed gear and the low-speed gear. The model
gearbox has a strong torque at low gears, which can extend the service
life of the motor. The corresponding gearbox lever and servo status are shown in the gure.
2.If you replace a new servo or transmitter, please adjust the servo parameters according to the state shown
in the gure. The main purpose is to adjust the EPA parameters of the corresponding channel of the
remote control to ensure the smooth operation of the servo in the working state. The servo will be damaged
due to long-term force.
Operating the Transfer Case:
1.The F150 PRO can switch three driving modes, namely 4WD, FWD and RWD, which are controlled by
the fourth channel of the transmitter, and the driving mode can be selected according to different road
conditions and vehicle states.

8
F 1 5 0 P R O
4WD Transfer Case
Shifting Servo State
4WD Transfer Case State
RWD Transfer Case
Shifting Servo State
RWD Transfer Case State
FWD Transfer Case
Shifting Servo State
FWD Transfer Case State
Front Diff Lock servo state
Front Diff Unlock servo state
Rear Diff Lock servo state
Rear Diff Unlock servo state
2.If you replace a new servo or transmitter, the channel switch of the remote control must be in three-way
please adjust the servo parameters according to the state shown in the gure, mainly by adjusting the EPA
parameters of the corresponding channel of the remote control to ensure that the servo is smooth in the
working state. The servo will be damaged due to long-term force.
Operating the Diff Lock:
1.The front and rear differential locks of F150 PRO are controlled by ve channels and six channels
respectively.
2.In most driving environments, the differential can be locked or unlocked at any time. If the speed
difference between the left and right tires is too large, rst release the throttle to reduce the wheel speed
difference and then lock the differential. The F150 PRO performs best when the front and rear differentials
are unlocked in most cases. This gives the F150 PRO the best steering performance and the smallest
turning radius, while also reducing the pressure on the driving components. If the opened differential
causes you to lose grip on loose terrain or prevents you from passing obstacles, you can use the differential
lock switch to lock the corresponding differential.
3.When locking the front differential lock or locking the front and rear differential locks, the high-speed
control and steering accuracy will be limited. The function of locking the differential can be used in any
situation, but when driving at high speeds, unlock the differential can greatly increase the vehicle
maneuverability.

9
F 1 5 0 P R O
About Run Time:
A large factor affecting run time is the type and condition of your batteries. The milliamp hour (mAh) rating
of the batteries determines how large their “fuel tank” is. A 3000 mAh battery pack will theoretically run
twice as long as a 1500 mAh sport pack.Because of the wide variation in the types of batteries that are
available and the methods with which they can be charged, it’s impossible to give exact run times for the
model. Another major factor that affects run time is how the model is driven. Run times may decrease when
the model is driven repetitively from a stop to top speed and with repetitive har
Tips for Increasing Run Time:
1. Use batteries with the highest mAh rating you can purchase.
2.Use a high-quality peak-detecting charger.
3. Read and follow all maintenance and care instructions provided by the manufacturer of your batteries
and charger.
4.Keep the ESC cool. Get plenty of airow across the ESC heat sink.
5.Lower your gear ratio. Installing a smaller pinion gear will lower your gear ratio and cause less power
draw from the motor and batteries,and reduce overall operating temperatures.
6.Maintain your model. Do not allow dirt or damaged parts to cause binding in the drivetrain. Keep the
motor clean.
Precautions:
1.Without proper care, some parts of your model can be seriously damaged due to contact with water.
Know that additional maintenance procedures will be required after running in wet conditions in order to
maintain the performance of your model.Do not run your model in wet conditions if you are not willing to
accept the additional care and maintenance responsibilities.
2.Not all batteries can be used in wet environments. Consult your battery manufacturer to see if their
batteries can be used in wet conditions. Do not use LiPo batteries in wet conditions.
3.The transmitter is not water resistant. Do not subject it to wet conditions, such as rain.
4.Do not operate your model during a rain storm or other inclement weather where lightning may be present.
5.Do not allow your model to come in contact with saltwater, brackish water, or other contaminated water.
Saltwater is highly conductive and highly corrosive. Use caution if you plan to run your model on or near
a beach.
6.Even casual water contact can reduce the life of your motor. Special care must be taken to modify your
driving style in wet conditions to extend the life of the motor.
Motor Precautions:
1.F150 Pro 775 motor life can be greatly reduced in mud and water. If the motor gets excessively wet or
submerged, use very light throttle (run the motor slowly) until the excess water can run out. Applying full
throttle to a motor full of water can cause rapid motor failure. Your driving habits will determine motor life
with a wet motor. Do not submerge the motor under water.
2.Do not gear the motor by temperature when running in wet conditions. The motor will be cooled by water
contact and will not give an accurate indication of appropriate gearing.
Additional Maintenance:
Increase your frequency of disassembly,inspection, and lubrication of the following items. This is necessary
after extended wet use or if the vehicle will not be used for an extended period of time (such as a week or
longer). This additional maintenance is needed to prevent any trapped moisture from corroding internal
steel components.

10

Front Assembly
THJ301
THJ259
THJ259
THJ259
THJ259
THJ259
THJ259
THJ297
THJ407
THJ297
THJ058
THJ058
THJ058
THJ058
THJ058
THJ058
THJ058
THJ058
THJ058
TC2508 THO036
THO036
TF3006
THJ259
THJ056
THJ259
THJ259
THJ259
THJ300
THJ299
TB3014
TB3014
TB3008
THJ277
THJ312
THJ305
TMS3003
TMS3003
THJ315
THJ277
THJ058
THJ058
THJ058
TB3028
TC3016
TC3016
THJ278
TF3008
TBB051104
THJ274
TH01176
TH01176
TC3020
TC3020
TC3022
TC3020
TC3020
TBB051104
TBB051104
THJ259
TC3008
THJ417
THJ414
THJ413
THJ415
THJ411
THJ418
THJ410
THJ410
THO025
THJ411
TC3008
TMN30
TMN30
TMN30
TMN30
L/R
TH01048
TF3006
TF3006
TB3012
TH01048
TB3012
TH01048
TF3006
TF3006
TC3010
TC3010
TC2510
TC2510
TB2512
TB2512 TBB050903
TME70
TBB121804
TB2504
TB2504
TB3012
TBB051104
TH01048
TB3012
TB2508
TBB051104
TBB051104
THJ276
TBB101504
TF2012
THJ279
THJ246
THJ318
THJ280
THO006
TBB152104
THJ276
TH01159

11
THJ296
THJ259
THJ050
THJ054
THJ070
THJ054
THJ070
THJ070
THJ051
THJ295
THJ070
THJ243
THJ055
THJ243
THJ424
THJ425
THJ423
THO037
THJ070
THJ070
THO037
THO037
THO037
THO037
THO037
TC3012
THJ277
THJ277
THJ278
TF3008
TC3016
TC3016
TBB051104
TBB051104
TBB051104
TB3006
TB3006
TC3008
TC3008
TB3006
TB3006
TBB051104
TBB051104
TBB051104
TBB051104
TBB051104
TC3008
TC3008
TC3020
TC3020
TC3020
TMN30
TMN30
THJ250
THJ250
TMN30
THJ058
THJ058
THJ058
THJ058
THJ058
THJ058
THJ259
THJ259
TB2510
TB2510
TB2508
THJ333
TB2510
TB2510
THJ412
THJ416
THJ417
THJ413
THJ412
THJ413
THJ412
THJ418
THJ417
THJ412
THJ416
THJ418 TMS3003
THJ306
TMS3003
THJ315
THJ312
TB3008
THJ259
THJ259
THJ259
TC3035
THJ259
THJ259
THJ259
THJ297
THJ297
THJ298
THJ298
THJ058
TC3020
TBB051104
THJ275
Rear Assembly
TC2508
TC2508
THO036
THO036
TF3006
TH01159
TH01159

12
Transmission Assembly
THE002
TB3010
TB3008
TB3008
TW320810
TMN30
TB3010
TB3010
TH01065
TH01065
TH01065
TH01005
TB3010
TF4008
TH01037
TMS4006
TC2510
TC2510
TF2506
TF2506
TH01115
TMN50
TWS051005
TH01002
TH01002
TH01111
TH01111
TH01067
TH01066
TH01066
TH01066
TH01035
TBB051004
TBB050825
TH01018
TH01030
TH01021
TH01106
TH01106
TH01031
TH01031
TH01022
TME25
TH01018
TH01036
TBB071103
TBB071103
TH01055
TBB051004
TH01057
TH01057
TH01006
TH01006
TC2508
THJ367
TC2510
TC2510
TBB051004
TBB051004
TBB050903
TH01029
TH01020
TH01034
TW050805
TW050805
TW050805
TW050805
TW060905
TBB050903
TBB050903
TBB051004
TBB051004
TH01028
TH01034
TH01034
TH01019
TH01034
TBB051004
TBB050903
TH01032
TBB061204
TH01033 TH01017
THP2512
TWS051005 Shaft A
Shaft B
Shaft C
Shaft C
Shaft B
Shaft A
TH01074
TF3010

13
Servo Assembly A
TH01057
THE004 TH01007
TH01007
TH01071
TBB050825
TBB050825
TB3008
TW030705
TF3006
THE004
TH01071
TH01071
TH01008
TH01051
TBB050825
TB3008
TW030705
TF3006
TB3008
TB3006
TF2506
TMN25
Servo Assembly C
TH01057
THE004
TH01071
TH01071
TH01071
TH01110
TB3016
Servo Assembly B
TB3012
TB3012
TW320810
TW320810
THE003
TC2508
TB3008
THO030
TH01174
THJ409
TF3008
TF3008
TB3018
TB3018
THJ266
THJ266
THJ381
THJ381
THJ267
THJ267
TF3012
TF3012
TF3014
TB3010
TB3010
TB3012
TB3012
TB2504
TF4012
THJ395
THJ395
THJ373
THJ373
THJ373
THJ373
THJ262
THJ307
THJ307
THJ377
THJ377
THJ263
THJ266
THJ266
TB3010
TB3010
TB3010
TB3010
TB3010
TB3010
TB3010
TB3010
TB3010
TF3014
TF3014
TB3020
TB3020
TB3012
TB3012
TH01177
TH01177
TH01177
TH01177
TH01173
TH01173
Servo Assembly D
THE004
TH01071
TH01008
TH01008
TH01051
TMS3003
TBB050825
TBB050825
TB3008
TB3006
TW030705
TMN25
TF3006
TF3010
TH01175
TH01175
Chassis Assembly

14
1mm
TF3008
TB3006
TB3006
TB3006
THO027
THO027
THO027
THO027
TF3008
TF3010
TF3010
TH01074
TH01074
TH01074
THE001
TB3008
TB3008
TMS3005
TH01112
TB2506
TH01074
THJ319
TH01180
TF3010
TF3008
TB3006
TB3006
TB3006
THO027
THO027 THO027
THO027
TF3008
FH3010
FH3010
FH3010
TB3010
TB3010
TB3012
TB3012
TB3012
TB3012
TF3010
TH01074
THJ080
TF3010
TF3010
TB3012
Servo C
TB3012
Servo D
Servo A
Servo B
Chassis Assembly

15
THJ374
THJ374
THJ374
THJ375
THJ375
THJ374
THJ374
THJ374
THJ374
THJ374
THJ374
TB3006
TB3006
THJ374
THJ374
THJ374
THJ374
THJ374
THJ378
THJ381
TC2004
TC2004
TC2006
THJ381
TB3008
TB3008
TF3008
TF3008
THJ376
THJ376
THJ376
TB2510
TB2510
TB3008
TB3008 TC2006
TC2006
TC2006
TC2006
TC2006
TC2006
Body Assembly

16
THJ377
TB3012
TB3012
TB3012
TB3012
TB3012
TB3012
TB3012
THJ273
TMNF40
THJ271
TB3012
TB3012
TB3012
TB3012
TB3012
TB3012
TB4045
THJ377
THJ377
THJ377
THJ377
THJ377
THJ377
THJ377
TB3012
THJ272
THJ271
THJ272
Roll-cage Assembly

17
THJ244
TMNF30
TMNF40
TMNF30
THJ377
THJ374
TB4022
THJ244
TMN30
TC3020
TC3020
TB3020
TB3012
THJ039
TB3012
TB3012
TB3022
TB3022
TB3016
TB3016
TB3022
THJ272
THJ272
THJ244
THJ244
THJ039
THJ039
TC2512S
TC2008S
THW001
THW001
Modular Assembly
194 mm
STEERING LINK
DRAG LINK
PANHARD BAR
UPPER LINK
LOWER LINK
120.2 mm
120.2 mm
131.7 mm
138.2 mm

18
F 1 5 0 P R O
TH01021 2-Speed link
TH01074 Box&Battery tray
TH01175 Rear brace set
TH01022 Transfer case link
TH01159 Hex hub
TH01020 Transfer case shaft
TH01115 Transmission strengthen mount
TH01031 Transfer case fork
TH01005 Transmission motor mount
TH01018 Transmission shaft set
TH01065 Transmission housing mount
TH01066 Transmission housing
TH01177 Floor pans
TH01017 Transmission frist shaft
TH01174 Steering servo mount
TH01176 Linkage mount
TH01028 2-Speed synchronizer
TH01033 Drive gear 29T
TH01034 Gear 29T
TH01037 Pinion gear 14T
TH01008 Differential lock servo arm
TH01032 Drive gear 17T
TH01002 Steel disc
TH01029 Transfer case synchronizer
TH01030 2-Speed shift fork
TH01006 Ball mount set
TH01035 Gear 17-29T
TH01007 2WD/4WD servo arm
TH01036 Gear 23T
THO030 Steering arm
THO036 Axle cover
TH01057 Ball 4mm
TH01067 Spur gear 50T
TH01173 Skid plates
TH01019 Transmission 2-speed shaft
TH01071 Servo mount set
TH01106 Spring D4.3×16mm
THJ078 Brushed ESC 80A
THE008 LED light system set
THJ307 Chassis rail set
THJ276 Bearing seat
THJ423 Shock absorber body
THJ050 Shock cap nut
THE004-HV TH1623 HV servo
THJ273 Wheel Set
THJ051 Adjusting nut
THJ424 Shock shaft
THE001 TH-GT5 transmitter
THJ057 Ball end 5.8mm
TH01111 Slipper pad
THJ274 Solid axle set front
THJ275 Solid axle set rear
TH01112 Double side tape&EVA kit
THW001 2.2" PRO COMP wheel
THJ280 Diff gear set
THJ295 Ball 5.5mm
THJ038 King pin bushing
THJ039 Drive shaft
THJ070 O-ring set
TH01110 Servo saver spring
THE002 775 Brushed motor
THJ321 Self-lock device of diff lock
THJ411 Steering knuckles
THJ373 Front bumper
THJ267 Body mount set
THJ280 Diff gear set
THJ415 Universal axle set
THO037 Shock Reservoir
THJ412 Rear portal axle
THJ413 Weight block 108g
THJ054 Shock spacer
THJ055 Shock piston
THJ418 Gear set 17T-23T
THJ266 Shock hoops set
THO027 Blade side frame
THJ277 Differential lock set
THJ417 Portal axle output shaft
THJ308 Magnet set
THJ395 Metal hook
THJ279 36T Bevel gear
THJ060 Linkage ball end 7mm
THJ410 Knuckle carrier
THJ409 Toe Link mount
THJ259 Linkage ball set
THJ414 Weight block 82g
THJ416 Straight axle Shaft
THJ056 Spacer
THJ259 Linkage ball set
THO006 Aluminum differential housing
THJ073 Shock absorber completed set
THJ377 Roll cage
THJ374 Simulation body parts
THJ378 Clear body
TBB051004 Bearing 5×10×4
TBB071103 Bearing 7×11×3
THJ375 Light cup
THJ376 Lamp mount
THJ302 Gearbox turnbuckle set
THJ298 Up threaded stainless steel link
THJ299 Front threaded stainless steel link
THJ297 Down threaded stainless steel link(
THJ300 Steering threaded Stainless steel link
THJ305 Front cable set
THJ306 Rear cable set
THJ301 Servo threaded Stainless steel link
THJ367 Gearshift pin
THJ425 spring D17×60mm
THJ407 Front up threaded stainless steel link
THJ246 Differential Pads
THJ314 Pin 2.0×11mm
THJ316 Pin 2.5×8mm
TBB050825 Bearing 5×8×2.5
TBB050903 Bearing 5×9×3
TBB051104 Bearing 5×11×4
TBB061204 Bearing 6×12×4
TBB101504 Bearing 10×15×4
TBB121804 Bearing 12×18×4
TBB152104 Bearing 15×21×4
TME25 E-clip 2.5mm
TB2504 M2.5×4 Button head screw
TME70 E-clip 7mm
TB2506 M2.5×6 Button head screw
TB2510 M2.5×10 Button head screw
TB3006 M3×6 Button head screw
TC3035 M3×35 Cap head screw
TF3010 M3×10 Flat head screw
TF3012 M3×12 Flat head screw
MTS2012 M2×12 Set screw
TB3018 M3×18 Button head screw
TB3016 M3×16 Button head screw
TC2004 M2×4 Cap head screw
TW320810 Washer 3.2×8×1mm
TMN30 M3 Nylon nut
TB4045 M4×45 Button head screw
TF2506 M2.5×6 Flat head screw
MTS4006 M4×6 Set screw
TF3014 M3×14 Flat head screw
TMNF30 M3 Flanged nylon nut
TB3008 M3×8 Button head screw
TMNF40 M4 Flanged nylon nut
TMN50 M5 Nylon nut
TC2508 M2.5×8 Cap head screw
TC3012 M3×12 Cap head screw
TF3008 M3×8 Flat head screw
TB3010 M3×10 Button head screw
TB3012 M3×12 Button head screw
TB3022 M3×22 Button head screw
TB3028 M3×28 Button head screw
TC2510 M2.5×10 Cap head screw
TC3008 M3×8 Cap head screw
TC3010 M3×10 Cap head screw
TC3022 M3×22 Cap head screw
TF2012 M2×12 Flat head screw
TB3020 M3×20 Button head screw
TC2512S M2.5×12 Cap head screw(silver)
TC2008S M2×8 Cap head screw(silver)
TC2512 M2.5×12 Cap head screw
TB4022 M4×22 Button head screw
TC2006 M2×6 Cap head screw
TC3016 M3×16 Cap head screw
TC3020 M3×20 Cap head screw
TB3014 M3×14 Button head screw
TF3006 M3×6 Flat head screw
TF4008 M4×8 Flat head screw
TF4012 M4×12 Flat head screw
TMS3003 M3×3 Set screw
MTS3005 M3×5 Set screw
TMN25 M2.5 Nylon nut
TW030705 Washer 3×7×0.5mm
TW060905 Washer 6×9×0.5mm
TW151702 Washer 15×17×0.2mm
TWS051005 Spring washer 5×10×0.5mm
THJ319 Antenna pipe set
THJ080 Velcro strap 20×200mm
TW050805 Washer 5×8×0.5mm