Tractive MP20 User manual

GP20/MP20 User Manual
MP20 Pet Tracker
User Manual V1.0

GP20/MP20 User Manual
Preface
Thank you for choosing this Pet tracker.This manual shows how to operate the device
smoothly and correctly.Make sure to read this manual carefully before using this product.
Please note that specification and information are subject to changes without prior notice
in this manual. Any change will be integrated in the latest release.The manufacturer
assumes no responsibility for any errors or omissions in this document.

GP20/MP20 User Manual
Contents
1. Overview.........................................................................................................................1
2. Application.......................................................................................................................1
3. Specifications..................................................................................................................1
4. Package..........................................................................................................................2
5. How to Install it.............................................................................................................2
6. Hardware Description.....................................................................................................3
6.1 Appearance ...........................................................................................................3
6.2 LED Indications.....................................................................................................3
6.2.1 Blue LED-GPS indicator............................................................................3
6.2.2 Orange LED-GSM indicator.......................................................................3
6.2.3 Red LED-charge indicator.........................................................................3
6.3 Tracker Recharge.................................................................................................3
7. Work Mode.....................................................................................................................4
8. Default Work Mode........................................................................................................4
9. Main Operation and Application...................................................................................4
9.1 Set Authorization Phone Number .......................................................................4
9.2 Delete authorization number................................................................................4
9.3 Work Mode............................................................................................................4
9.4 Change the password..........................................................................................4
9.5 Single Locating .....................................................................................................5
9.6 Request location with Google Map link.............................................................5
9.7 Monitor...................................................................................................................5
9.8 Phone position and Talk Mode function............................................................5
9.9 SOS Alarm............................................................................................................5
9.10 Daily Report........................................................................................................6
9.11 Geo Fence (The Default is 500 meter)...........................................................6
9.12 Overs peed Alarm..............................................................................................6
9.13 Set Time Zone....................................................................................................6
9.14 Low Power Alarm...............................................................................................6
9.15 Voice Alarm Function.........................................................................................7
9.16 Set Sleep Mode .................................................................................................7
9.17 Set APN(Access Point Name) ..........................................................................7
9.18 Set Server IP and PORT..................................................................................7
9.19 Set GPRS Upload Interval Time ......................................................................7

GP20/MP20 User Manual
1
1. Overview
GP20/MP20 is the latest Waterproof Pet GPS Tracker.This device can locate and
monitor any remote Pets by SMS or Internet. It also has two-way voice communication
and remote listen-in functions.The unit features excellent and stable work performance.It
used for personal(kids/elderly)tracking and fleet management.
2. Application
GSM 850/900/1800/1900Mhz works worldwide.
Track by SMS/GPRS
Real-time Position inquire
Report SMS with Google Maps Link
Two-way Voice Communication
Listen-in(Voice Monitoring)
History trace Display
SOS Alarm
Geo-fenceAlarm
Low batteryAlarm
Over-speed alarm
Waterproof IP65
Long Standby Time for 5 days
3. Specifications
Item
Specifications
GSM Frequency
GSM 850/900/1800/1900MHz
GPS Chip
U-BLOX7
GPS Sensitivity
-162dBm
Channel
56 Channel
Positioning Accuracy
5~10 Meters
Hot start
1s on average
Warm start
28s on average
Cold start
29s on average
Working temperature
-25°C to 55°C
Humidity
5%~95% non-concretion
Backup battery
Chargeable 3.7V 1000mAh Li-ion battery

GP20/MP20 User Manual
2
Item
Specifications
Charging Voltage
Micro USB interface DC 5V
Weight
55g
Dimension
80(L)*37(W)*18(H)mm
Waterproof
IP65
Standby
5 days
4. Package
1* MP20 Pet Tracker
1* Adapter
1* Nylon Collar
1* USB Cable
1* User Manual
5. How to Install it
Get ready a SIM Card
Disconnect the waterproof bloc, insert the SIM Card.
Pay Attention:
Tracker will POWER ON automatically after insert the SIM card
SIM Card should open the GPRS function
SIM Card should open the “Caller ID display” function
If your SIM Card is open and need enter SIM PIN, please check your mobile
phone user manual and close the SIM PIN function
Please confirm that the SIM Card have enough money。
To avoid the thief break it, please put the tracker in a covert place
Tracker have internal GSM and GPS antenna, please ensure that the
tracker should face the sky without any metal block it

GP20/MP20 User Manual
3
6. Hardware Description
6.1 Appearance
6.2 LED Indications
6.2.1 Blue LED-GPS indicator
6.2.2 Orange LED-GSM indicator
Status
Description
Light ON
GSM Work Normally
Light Flash
No GSM or GSM search net
6.2.3 Red LED-charge indicator
6.3 Tracker Recharge
Please recharge above 12 hours in the first recharging and use the original charger
and battery. PayAttention:
Our battery have chemical composition ,please do not break or stick and throw it
in the fire .
Status
Description
Light ON
GPS work normally
Light Flash
NO GPS or GPS search signal
Status
Description
Light ON
Under charging
Light OFF
Normally Work or Full Power

GP20/MP20 User Manual
4
Please keep the batter have enough power
7. Work Mode
This tracker has two work mode which is SMS and GPRS Mode. SMS mode i
s for off line tracking by Mobile phone. GPRS Mode is for on line tracking by com
puter and mobile phone .
8. Default Work Mode
The Original password of the tracker is : 0000
The Default work mode is : SMS Mode
The Default Voice is : ON
The GPS work status : A means GPS work normally . V means no G
PS
The Battery Status : 5 means 100% power, 1 means 20% power
9. Main Operation and Application
9.1 Set Authorization Phone Number
Instruction format: phone number+User password+Space+Sequence number (1-3)
E.g.: 134243923300000 1
Reply:SET OK.
Note: 1. The device defaulted password is 0000.
2. The device can only authorized 3 cell phone numbers
9.2 Delete authorization number
D101# （delete the first authorization phone number）
D102# （delete the second authorization phone number）
D103# （delete the third authorization phone number）
9.3 Work Mode
This tracker have two work mode which is SMS and GPRS Mode. SMS mode is for off
line tracking by Mobile phone. GPRS Mode is for on line tracking by computer and mobile
phone .
SMS Mode: 700+ user password
E.g.: 7000000
Reply: SET OK
GPRS Mode：710+ user password
E.g.: 7100000
Reply: SET OK
9.4 Change the password
Instruction format:777+new password+old password

GP20/MP20 User Manual
5
E.g.:77712340000
Reply:SET OK.
9.5 Single Locating
Instruction format: 666+user password
Example: 6660000
Reply: when you send out this command you can get SMS reply as follow:
La: +22 33.7859
Lo:+114 05.5514
Date: 2013-12-27
10:12:30
ID: 8803000003
STATE:ACC OFF
Bat:6
9.6 Request location with Google Map link
Instruction format:669+ user password
Example: 6690000
Reply: when you send out this command you can get SMS reply as follow:
http://maps.google.com/maps?q=22.56312%2c114.09191
FIX:A,2013-12-27
10:15:30
9.7 Monitor
Instruction format：66
Reply : SET OK
Note: Only the authorization phone number send command to the tracker, then
tracker will call the phone number and be the monitor mode .
9.8 Phone position and Talk Mode function
Any Phone call the tracker, if nobody hang on the phone from the SOS button of the
tracker above 10 times ring sound, then tracker will hang off the phone and send a
position message(Google link message) to the sender automatically , if hang on, then
tracker will enter in talk mode and will not send the position message any more.
if the tracker no GPS, user call the tracker, tracker will reply a incorrect message to
the first sender number, once GPS work normally, tracker will send a new message to the
sender number automatically. That is mean one call and two message if no GPS and one
call with one message if GPS work normally .
Note: Press SOS button one time is for hang on the phone , press SOS button two
times is for hang off the phone .
9.9 SOS Alarm
When press the SOS button for 3 seconds,tracker will call and send the position
message to the 3 authorization phone number automatically.
Note: If the first authorization phone number hang on the phone,then tracker will not

GP20/MP20 User Manual
6
call and send message to the second and third authorization phone number .
9.10 Daily Report
Enable Daily report: 665+user password+HHMM
E.g.: 66500001022
Reply: SET OK.
Disable Daily report: 665+user password+OFF
E.g.: 6650000OFF
Reply: SET OK
Note:1.HH stands for hour with defined range of [00, 23]. MM stands for minute with
defined range of [00, 59].
2. Only send Daily Report to the first authorization phone number
9.11 Geo Fence (The Default is 500 meter)
Set Geo Fence : 005+user password+Space+D
E.g: 0050000 1000 (1000meter)
Reply: SET OK
Turn On Geo-fence: 211+ password
E.g: 2110000
Reply: SET OK
Turn OFF Geo-fence: 210+ password
E.g: 2100000
Reply: SET OK
Note: Only send alarm message and call to the first authorization number
9.12 Overs peed Alarm
Instruction format: 122+user password+Space+Speed
E.g.: 1220000 120
Reply: SET OK
Instruction format:122+user password+0
E.g. : 1220000 0
Reply : SET OK
Note: 1. Speed unit is KM/H with defined domain of [0, 999].
2. Tracker will send alarm message and call to the 3 authorization number.
9.13 Set Time Zone
Instruction format: 896 + user password + D + NN
E.g.: 8960000E08
Reply : SET OK
Set Zero Time Zone: 896+user password+space+00
E.g. : 8960000 00
Note : The Default time zone is : 0 Time Zone
9.14 Low Power Alarm
While device detect internal battery is low power, it will send low power alarm SMS to

GP20/MP20 User Manual
7
the first authorization number..
9.15 Voice Alarm Function
Voice ON:150+password
E.g.:1500000
Reply:SETOK
Voice OFF:151+password
E.g.:1510000
Reply:SET OK
Note: in voice on mode, phone alarm open, in voice off mode,phone alarm off .
9.16 Set Sleep Mode
Open Sleep Mode: SLEEP+User Password+Space+Time
E.g.: SLEEP0000 1
Reply: SET OK
Close Sleep Mode: SLEEP+User Password+Space+0
E.g. : SLEEP0000 0
Reply : SET OK
Note: Time is mean Sleep Time, the unit is : minute . when tracker above the set time
without receive any command, Tracker will close GPS/GSM/Power in sleep mode for save
power, once shake, tracker will wake up again and follow this cycle automatically .
9.17 Set APN(Access Point Name)
Instruction format1:803+user password+Space +APN
E.g.: 8030000 CMNET
Instruction format2:#803#password#APN#APN user name#APN password##
E.g.: 8030000 CMNET INTERNET INTERNET
Reply: SET OK.
9.18 Set Server IP and PORT
Instruction format:804+user password+ Space+IP+Space+Port
Example: 8040000 192.168.1.1 9115
Reply:SET OK.
9.19 Set GPRS Upload Interval Time
Instruction format:05+User Password+Space+interval time
E.g.: 8050000 30
Reply:SET OK.
Note: interval time unit is second and the range is [1,180000].