Transcend Memory Stick Reader/Writer User manual

USB
Memory Stick Reader/Writer
User’s Manual

Table of Contents
Introduction
Package Contents....................................................................................... 1
Features....................................................................................................... 1
System Requirements ................................................................................ 2
Hardware Setup & Driver Installation
Installation for Windows Operating Systems
Auto Mode............................................................................................... 2
Manual Mode........................................................................................... 4
To Uninstall...........................................................................................10
Note: To remove Memory Stick Reader/Writer for
Windows 2000/Me and XP.......................................................10
Installation for Mac OS 8.6 ........................................................................12
Installation for Mac OS 9.X & Mac OS X 10.1........................................... 12
Use of Memory Stick Reader/Writer with Mac OS...................................13
Warning..................................................................................................... 13
Specifications....................................................................................... 13

1
Introduction
Thank you for purchasing Transcend’s Memory Stick Reader/Writer. The USB
key-chain type design of this device provides you with a convenient and fast
data exchange mechanism (MP3, PDA, Digital Camera, data, etc…) with very
easy Plug and Play installation.
Package Contents
The Memory Stick Reader/Writer package should include the following items:
 Memory Stick Reader/Writer
 Driver CD
 Quick Installation Guide
 USB Extension Cable
If any items are missing or damaged, please immediately contact your retail
dealer.
Features
The Memory Stick Reader/Writer has the following features:
 Compliant with USB specification version 1.1
 Supports Windows®98SE/2000/Me and Windows®XP
 Supports Mac™OS 8.6, Mac™ OS 9.X and Mac™OS X 10.1
 Easy Plug and Play installation
 USB key-chain type design for desktop PC, Notebooks, and Handhelds
 USB bus powered. No external power needed.
 Compatible with Memory Stick™media
 High performance data transfer rate: Over 350K bytes/sec
 Aconvenient and fast data exchange device (MP3, PDA, Digital Camera,
data, etc.)

2
System Requirements
 One standard USB port
 One of the following operating systems:
Windows 98SE
Windows 2000
Windows Me
Windows XP
Mac OS 8.6
Mac OS 9.X
Mac OS X 10.1
 CD-ROM Drive for Manual Driver Installation
 Memory StickMedia
Hardware Setup & Driver Installation
Follow the steps below to install the Memory Stick Reader/Writer and Driver
for the first time:
Installation for Windows Operating Systems
Auto Mode:
Driver Installation
Please don’t plug your Memory Stick Reader/Writer into the USB port of your
computer before you start installing the driver.
Follow the steps below to install the Memory Stick Reader/Writer driver in a
Windows OS:
Step 1: Power on the computer where you will connect the Memory Stick
Reader/Writer and make sure that the USB port is enabled and
working properly.

3
Step 2: Insert the Memory Stick Reader/Writer Driver CD into the CD-ROM
drive and run the Setup.exe program.
Step 3: The Installation Wizard will guide you through the complete installation
process.
Hardware Setup
Step 1: Connect the Memory Stick Reader/Writer to an available USB port of
your computer.
Step 2: Your computer will automatically recognize the Memory Stick
Reader/Writer and register the new devices necessary to use it.

4
Step 3: The Memory Stick Reader/Writer is ready for use. You can find a
new Removable Disk drive with a newly assigned drive letter in the
My Computer window.
Manual Mode:
Hardware Setup
Before installing the device driver for your Memory Stick Reader/Writer,
refer to the following instructions:
Step 1: Power on the computer where you will connect the Memory Stick
Reader/Writer and make sure that the USB port is enabled and
working properly.
Step 2: Connect the Memory Stick Reader/Writer to an available USB port of
your computer.
Step 3: Your computer will automatically recognize the Memory Stick
Reader/Writer and register new devices to enable its use. Please
refer to the following for driver installation.

5
Driver Installation
Windows 98SE
Step1a: When you plug the Memory Stick Reader/Writer into a USB port on
your computer, a driver installation message for USB MS Card
Reader will appear.
Step 1b: Please insert the Driver CD into the CD-ROM drive. Click “Next” to
continue.
Step 2: Click on “Search for the best driver for your device”.Click “Next” to
continue.

6
Step 3a: Please choose “Specify a location”. Click on “Browse” to select the
correct path to the driver folder.
Step 3b: The Browse for folder window should open. Browse to your
CD-ROM drive. Click on “Drive (E:)” (where E is the CD-ROM drive
letter). Select the “Win98” folder. Click on “OK”.

7
Step 3c: Return to the previous window and click on “Next”.
Step 4: Your computer should find “USB Memory Stick Reader/Writer”. Click
on “Next” to continue.

8
Step 5: Please click on “Finish” to continue.
Step 6: Your computer should find the “Memory Stick Reader/Writer” now.
Click on “Next”.