TransTel Communications DK-ACP60P User manual

DK-ACP60P
Quick Guide Manual
Transtel DK-ACP60P
1

Package Include：
(Please confirm the package contains the following products
and accessories)
Surface Mount Box x 1 (Including Base and Rain Hood)
Terminal Blocks x 4 Surface Mount Box Screws x 4
Rain Hood Fix Screws x 4 Back Cover Fix Screws x 4
DK-ACP60P x 1
Product Overview：
3 x 5 Keypad
Speaker
2
Microphone
Call Button
OLED Screen
RFID Reader

DK-ACP60P
Quick Guide Manual
3
DK-ACP60P Installation：
First, use hand drill to make 4 screw
holes for Terminal Block.
Put 4 terminal blocks into the holes.
Step 1
Step 2
Put Surface Mount Box onto the wall
and use 4 Surface Mount Box Screws
to fix it on the wall.
Put Back Covers of DK-ACP60P onto
Surface Mount Box and fix it with
4 Back Cover Screws.
Step 3
Put DK-ACP60P on the Back Cover.
There are 4 hooks on back cover, must
make sure DK-ACP60P be hook on.
(These hooks have anti-vandal function)
Put Rain Hood Piece on the top of
Surface Mount Box and fix it with
4 Rain Hood Screws on both sides.
After fixing the Rain Hood, the installation
is complete.
IP39-60e
IP39-60e

DK-ACP60P
Quick Guide Manual
4
DK-ACP60P Programming：
To complete DK-ACP60P SIP Access Phone programming,
please see the Product User Manual.
Download：https://www.transtel.co/download
DK-ACP60P Basic Operation：
1. Press the call button of DK-ACP60P directly, it will call the
predefined Indoor Monitor or Concierge Room.
2. Visitors can use keypad to enter the speed dial Number to
call the Resident House.
3. All the Status like Intercom Information and Door Status and
so on, will display on the OLED Screen.
4. When callers call at the dark environment, infra-red sensor
of DK-ACP60P will operate, let users to see clear image.
5. Users can unlock the door by swiping the valid RFID Card on
DK-ACP60P.
P/N 550349066230