TRASSIR TR-D2121CL3 User manual
Outdoor Full Time Color Camera
TR-D2121CL3
Specification
TR-D2121CL3
1/2.8" CMOS 2МP
FullHD(1920x1080)
FullHD@25fps
1/2 ~ 1/1 000 s
FTC
0.0015Lux (F1.0) / 0Lux (LED on)
up to 35 m
(neutral white)
2.8 / 4.0
2.8 mm: 105˚ / 55˚
4.0 mm: 81˚ / 44˚
Pan: 0˚-360˚
Tilt: 0˚-105˚
Rotation: 360˚
Real WDR (120dB)
3D DNR
Н.265+ / Н.265 / H.264+ / H.264
up to 8Mbps
MicroSD up to 128GB
Built-in microphone
Yes
Yes
PoE (802.3af) / 12V DC
0
DC: 3.36W
PoE: 4.8W
Metal
184.7 x 66.5 x 63
480 / 580
IP67
TVS 4000V
-40°C … +60°C
Model
Image sensor
Resolution
Frame rate
Electronic shutter speed
Day/Night mode
Sensitivity
LED range
Lens (mm)
Field of view (horiz./vert.)
Axes setting
WDR
Digital noise reduction
Video compression
Bitrate
Local storage
Audio
Corridor mode
IVS
Power supply
PoE Class
Power consumption
Case material
Dimensions (mm)
Weight Net/Gross (g)
Protection
Power surge
suppressor
Working temperature
-40°
Full Time
Color
Note: read user manual before using
Website: www.trassir.com
Technical support
www: helpdesk.trassir.com
Data ___________________________ Stamp ___________________________
Here is the confirmation form for warranty assurance
Manual setting of network parameters
In order to connect to the IP camera, the PC should be in the same local
network as the camera. The IP address of the camera, the PC and any
other device on the network should not match.
The IP camera has the following default settings:
- IP address: 192.168.1.188
- Subnet mask: 255.255.0.0
- Gateway: 192.168.1.1
- HTTP-port: 80
- username: admin
- password: admin
PC network settings example:
- IP address: 192.168.1.10;
- Subnet mask: 255.255.0.0.
There are 3 options to set up your camera:
1. Change IP address of a camera manually.
Start your browser, connect to IP camera and enter your
username and password. Choose appropriate menu item and change
network settings of IP camera.
2. Set up camera IP address using fast configuration utility that can
be downloaded from www.trassir.com.
3. Change IP camera settings using TRASSIR professional software.
You can find detailed camera settings instructions in User Manual that
can be downloaded from trassir.com.
introduction
Congratulations on purchasing TR-D2121CL3 IP camera.
Please read User Manual before using the camera.
Key features
• Supports H.265+
• Wide Dynamic Range (Real WDR 120dB)
• LED range up to 35 m
• Built-in video archive (Edge Storage) - local recording
on MicroSD card* up to 128GB with Hotswap support
• Built-in microphone
• TCP/IP, HTTP, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, UPnP,
SMTP, NTP, ONVIF protocols
• IVS: Human detection, Line crossing, Intrusion detection
• Power supply 12V DC or PoE
___________________________
* MicroSD Card is not included into camera package
Camera package
1. IP camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
2. User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
3. Mounting kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
Attention!
The power supply should meet the following requirements: output
voltage, current, polarity, and working temperature. When using the
camera in thunderstorm conditions, make sure there is a lightning rod or
unplug the power connector.
Pay attention to the temperature requirements for IP camera operation.
Avoid using the device in excessively high or low temperatures.
Do not install the camera near heaters. Do not point the camera lens at
the sun or at bright objects as this can damage the image sensor.
Connecting
To get started with the IP camera, you are required to have a PC
connected to the local network with Windows installed and Internet
Explorer version 8 or higher.
1. Connect IP camera to the network.
2. When the camera is connected through a switch which doesn't support
PoE, connect the adapter to the power jack.
Dimensions
880-5.10.22
184,7
80,892,4
63
66,5
68
46
∅53
∅4
Mic
micro SD
Reset
Other TRASSIR CCTV Camera manuals
