
TRAXMATE TM100 QBIT
USER MANUAL
www.traxmate.io
Overview1.
1 Device Overview1.
Charger Lanyard
2. Power on/off
Long Press SOS for 3 seconds to
turn on the device.
Blue/Red/Green LED
indicators will be on.
To check if your device is on,
press the button once quickly. If
the device is on, the lights will
flash.
2. 1 Power on
2 Accessories1.
USB Cable
3. SOS Button
Not possible to power off. It powers off when battery
runs out. When the battery is low, Traxmate has the
possibility to send a notification.
2.2 Power off
2.3 Battery Charging
Connect the device with the original charger in an outlet.
1) Device is charging if red indicator is always on,
2) Red indicator flickers slowly if device is fully charged.
Note: It takes about 2 hours to fully charge the battery.
It is normal that the device goes hot during charging.
Long Press SOS for 3 seconds to trigger the SOS alert
and red indicator will blink twice.
For more discrete alert, the device could be carried in
your pocket and activated.
Note: A shorter push will not send an SOS alert.
3.1 Activating the SOS Alert