TRAXX MC8 User manual

OPERATIONS MANUAL
MC8 SCARIFYING MACHINE
Unit 4/1 Rocklea Drive
Port Melbourne Vic 3207
1300 109 108
www.traxxcp.com.au

Traxx Constructions Products Operations Manual – MC8 Scarifying Machine 2
The contents of this Operations Manual are the copyright of the publisher and may not be reproduced (even extract)
unless permission is granted. Traxx Construction Products has composed this manual with accuracy. However, mistakes
may occur or articles may be changed. Traxx Construction Products is not responsible for mistakes or deviations of
figures, graphics or any other information found in this instruction manual.
1. SAFETY INSTRUCTIONS …………..………...………………………………………………………………….……………………..3
2. ASSEMBLY ………………………….………………………………………………………………………………………………………..3
3. HANDLE ASSEMBLY …..…………….……………………………………………………………………….…….……………………3
4. STOP SWITCH ………….………..………..…………………………………………………………………………….…………..…….3
5. EDGERINSTALLATION …………..…….……………………………………………………………………….………………………4
6. EDGER REMOVAL ………………………………………………………………….….…………………………………….…….…….4
7. CUTTER CAGE REMOVAL & CUTTER CHANGE ……………………..……………………….……………………..……..…5
8. STARTING PROCEDURE ……….………………………………………….……………………………………….…………………..5
9. TO STOP ENGINES …..……………………………………………………………………………………………………………………5
10. MAINTENANCE ……………………………………………………………………………………………………………………….……6
11. BEARING REPLACEMENT PROCEDURES ……………………………..………………………………………………….……..6
12. TROUBLE SHOOTING GUIDE ………………………………………………………………………………………………………….7
13.SPECIFICATIONS …………………………………………………………………………………………………………………………..8
14. TRANSPORTATION ……………………………………………………………………………………………………………………….8
15. WARRANTY ………………………………………………………………………………………………………………………………….8
16. MAINTENANCE RECORD ……………………………………………………………………………………………………………….9
17. PARTS LIST ……………………………………………………………………………………………………………………………………10

Traxx Constructions Products Operations Manual – MC8 Scarifying Machine 3
1. SAFETY INSTRUCTIONS
2. ASSEMBLY
3. HANDLE ASSEMBLY
4. STOP SWITCH

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 4
5. EDGER INSTALLATION
6. EDGER REMOVAL

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 5
7. CUTTER CAGE REMOVAL & CUTTER CHANGE
8. STARTING PROCEDURE
9. TO STOP ENGINES

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 6
10. MAINTENANCE
11. BEARING REPLACEMENT PROCEDURES

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 7
12. TROUBLESHOOTING GUIDE

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 8
13. SPECIFICATIONS
14. TRANSPORTATION
15. WARRANTY

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 9
16. MAINTENANCE RECORD

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 10
17. PARTS LIST

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 11

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 12

Traxx Constructions Products Operations Manual –MC8 Scarifying Machine 13

Unit 4/1 Rocklea Drive
Port Melbourne Vic 3207
1300 109 108
www.traxxcp.com.au