Oypla GARDEN 4185 User manual

Wheelbarrow Planter
User Manual
USER MANUAL Model No: 4185

Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
•Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
•This product is not a toy, and is only to be used for its designated purpose.
•Move to the final position before filling the planter.
•Only use this product on stable, level and dry ground.
•This is a garden planter, do not use as a wheelbarrow.
•Do not discard any of the packaging until you have checked that you have all of the
parts and fittings required.
•This product is intended for outdoor use only.
•Leaving the product outside exposed to weather, especially direct sun and rain,
will speed the weathering process. This can be slowed by removing the product
from these conditions.
•This product contains small parts that could be a choking hazard if swallowed.
Keep these items away from children.
•Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is
completely assembled, then finish by tightening all nuts. All nuts must be
tightened before use.
•If the product is damaged or has any defects, please contact [e-mail]
USER MANUAL Model No: 4185

Part
Quantity
❶Support Frame
x2
❷Wheel
x1
❸Axle
x1
❹Small Screw
x2
❺Body
x1
❻Left Leg
x1
❼Right Leg
x1
❽Left Handle
x1
❾Right Handle
x1
❿Screws
x10
USER MANUAL Model No: 4185
Assembly Instructions
If you are missing any of the below parts please contact [email protected]om
Please be aware that you will be referring to this parts list throughout the assembly process.
Parts List:
Care and Maintenance
•Line the inside of the planter with polythene sheeting before filling. Ensure that a few holes are
made in the sheeting for drainage.
•Preserve the wood using timber treatment. Follow the directions on the can after first checking
that it is not harmful to plants.

1. Insert the wheel halfway along the axle and insert wooden dowels either side of the wheel. Insert
each side of the axle into the supports.
2. Attach the body to the supports and secure using 4 screws.
3. Attach the legs to the supports using 2 screws each.
4. Attach the handles onto the supports using 2 screws on each side.
USER MANUAL Model No: 4185
❶
❶
❷
❸
❹
❺
❿
❼
❿
❻
❾
❽
❿
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4185